• Journal of Surface Science and Engineering
• /
• v.34 no.4
• /
• pp.313-320
• /
• 2001

It is well known that the amount of hot-dip Zn coated sheet steels used for automotive is rapidly increasing. As hot-dip steel sheets show good corrosion resistance and excellent formability, the demand for outer panel of automotive has been increased in order to satisfy with the requirement of high surface qualify. There are many kinds of factors influencing on the surface quality and the dross control in the galvanising bath is regarded as one of the most important thing. In this study the characteristic and growing behavior of dross in the galvanizing bath were investigated and the effect of dross on the surface defect of GA was surveyed. The dross defects on the GA sheet steels result from bottom dross whose diameter are larger 50$\mu\textrm{m}$ in the Zn pot. Dross-free state exist for about 30 hours from starting time of GA production.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.10a
• /
• pp.108-108
• /
• 2009

가전분야에서 EG강판 위에 피복된 크롬－프리 코팅은 내식성 및 심미성 이외에도 전기전도성이 요구되는데 이는 가전기기로 사용되므로 전자파 차폐성 및 용접성을 부여하기 위함이다. 내식성의 관점에서 보면 코팅된 수지 부착량이 많을수록 부식인자의 침투를 방해하여 내식성이 향상되나 일정한 부착량 이상에서는 전기전도성이 취약해지는 단점을 가지게 된다. 따라서 본 연구에서는 수지내에 나노금속분말을 고르게 분산시키는 연구 및 이를 이용하여 기존의 수지두께 이상에서도 전기전도성을 가질 수 있는 강판을 연구하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.6 no.4
• /
• pp.157-167
• /
• 2002

In most cases, quantity of reinforcement is determined without regard to the difference of initial strain, and status of damages when calculated the strengthening in flexure at beams. Thus, the purpose of this study is to investigate the flexural strengthening efficiency and behavior of RC beams strengthened with carbon fiber sheets(CFS) considering different status of damages. in this paper, a nonlinear analysis program considering rip-off strength and residual stress of steel bars and concrete in different status of damages is developed to predict the flexural behavior of CFS strengthened beams. Rip-off strength equation is obtained by modifying moment of inertia in the Robert's equation. And conformed developed nonlinear analysis program in variable of strengthening CFS amount and status of damages(initial, case1, case2, case3) and tension reinforcement ratio(0.2~1.0%).

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.278-278
• /
• 2012

용융아연 도금욕에 1~2% 정도 첨가된 Mg은 수지상 결정인 아연 스펭글의 크기를 미세화 시키고, 특히 $MgZn_2$ 및 $Mg_2Zn_{11}$ 금속간화합물로 석출되어 철에 대한 희생방식능을 높여 주는 역할을 함은 잘 알려진 사실이다. 여기서 Al은 수지상 결정인 아연 스펭글의 크기를 미세화 시키고는 역할도 하지만 $MgZn_2$ 및 $Mg_2Zn_{11}$ 석출의 총량을 감소시키지만 또한 $MgZn_2/Mg_2Zn_{11}$ 비를 증가시키는 역할을 함을 알 수 있었다. 특히 Al 및 Mg을 각각 2% 정도 첨가함으로 염수분무실험에서 도금층의 부식량이 일반 아연도금층에 비해 1/3 정도로 되었다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.265-265
• /
• 2012

스퍼터링을 이용하여 금속을 코팅하면 대부분 주상정 형태의 미세구조로 성장한다. 금속 코팅층의 미세구조를 코팅공정으로 제어하여 치밀한 구조의 코팅층을 합성하기 위해서 평형(balanced magnetron)과 비평형(unbalanced magnetron) 스퍼터링에 의한 박막 구조 변화를 비교하고, 빗각 증착(oblique angle deposition) 효과가 코팅층의 미세구조에 미치는 영향을 확인하였다. 실험에 사용된 타겟은 6 인치 직경의 알루미늄이었으며 기판은 실리콘 웨이퍼와 냉연강판이 사용되었다. 알루미늄 코팅층은 주사전자현미경으로 미세구조를 관찰하였으며, 미세구조 변화가 내부식 특성에 미치는 영향을 평가하기 위해서 알루미늄이 코팅된 냉연강판의 염수분무 시험을 실시하였다. 빗각 증착에 의한 코팅층 미세구조 변화가 가장 두드러지게 나타났으며, 빗각 증착에 의해서 알루미늄 코팅층이 치밀해지는 현상을 관찰할 수 있었다. 알루미늄이 코팅된 냉연강판을 분석한 결과, 빗각 증착으로 코팅된 알루미늄 코팅층이 두께 약 $3{\mu}m$에서 염수분무 200 시간 후에도 적청이 발생하지 않는 우수한 내식성을 보였다.

• Advances in concrete construction
• /
• v.8 no.2
• /
• pp.101-117
• /
• 2019

Structural strengthening of reinforced concrete (RC) beams is becoming essential to meet the up-gradation of existing structures due to the infrastructure development. Strengthening is also essential for damaged structural element due to the adverse environmental condition and other distressing factors. This article reviews the state of the field on repair, retrofitting and rehabilitation techniques for the strengthening of RC beams. Strengthening of RC beams using various promising techniques such as externally bonded steel plates, concrete jacketing, fibre reinforced laminates or sheets, external prestressing/external bar reinforcement technique and ultra-high performance concrete overlay have been extensively investigated for the past four decades. The primary objective of this article is to discuss investigations on various strengthening techniques over the years. Various parameters that have been discussed include the flexural capacity, shear strength, failure modes of various strengthening techniques and advances in techniques over the years. Firstly, background information on strengthening, including repair, retrofitting, and rehabilitation of RC beams is provided. Secondly, the existing strengthening techniques for reinforced concrete beams are discussed. Finally, the relative comparisons and limitations in the existing techniques are presented.

• Steel and Composite Structures
• /
• v.46 no.5
• /
• pp.659-667
• /
• 2023

Nonlinear forced vibration behaviors of sandwich plates having graphene platelets (GPL) based face sheets have been researched in this article. Possessing low weight together with low stiffness, square honeycomb cores are mostly constructed by aluminum. Herein, the square shaped core has been fortified by two skins of GPL-based type in such a way that the skins have uniform and linearly graded GPL dispersions. The square shaped core has the effective material specification according to the relative density concept. The whole formulation has been represented based upon classical plate theory (CPT) while harmonic balance approach is applied for solving the problem and plotting the amplitude-frequency curves. The forced vibration behaviors of such plates are influenced by square-shaped core and the relative density, skin's height and GPL fortification.

• Korean Journal of Materials Research
• /
• v.14 no.9
• /
• pp.676-681
• /
• 2004

In-situ observation in SBM on the microfracture behavior of coating layer was performed for GA steel sheets that have various Fe contents and thickness of coating layer. In case of cross sectional side of coating layer that was in a tensile stress state during bending, fine perpendicular crack pre-induced during galvannealing grew and propagated rapidly toward the coating surface with the increase of strain. And then it grew and propagated along the ${\Gamma}/Fe$ matrix interface, and combined with the nearest another perpendicular crack. Consequently, flaking occurred. The more Fe content and thickness of coating layer increased, the more average crack interval and flaking resistivity increased. Exfoliation was little observed at coating surface in a tensile stress state.

• Korean Journal of Materials Research
• /
• v.4 no.1
• /
• pp.44-54
• /
• 1994

Effects of cooling rate, cold reduction %, continuous annealing treatments on the recrystallization texture structure of the A1 killed extra low carbon steel sheet contaning Ti, Nb, and B were investigated. The texture coefficient ratio TC (222)/TC (200) tends to increase with decreasing the cooling rate of the coling process and increasing cold reduction %. However, the texture coefficient ratio tends to decrease as the cold reduction % increases from 80% to 90%, which may be due to the change of the primary texture structure from {554} (225) to {ill] (1 1%). The optimum fabrication procedures for the steel sheet with a maximum texture coefficient ratio may be : furnance cooling after the coiling treatment, 80% cold reduction and the continuous annealing treatment of holding at 80O0C for 1 min., water quenching and then holding at $450^{\circ}C$ for 5min.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.17 no.4
• /
• pp.270-277
• /
• 1997

Plastic anisotropy is one of important factors which determine the drawability of a steel sheet. It has been mainly measured by mechanical tensile test. From the ultrasonic velocities propagating along the relative directions to the rolling direction, CODF(crystallite orientation distribution function) can be measured and ODC's(orientation distribution coefficients) has some correlations with the plastic anisotropy. In this study the correlations between the plastic anisotropy and ODC's of the cold rolled steel sheet were measured. From the results of ultrasonic velocity measurements the average normal anisotropy, $\bar{\gamma}$ and the average planar anisotropy, ${\Delta}r$ could be predicted within the accuracy of ${\pm}0.082$ and ${\pm}0.096$, respectively. Acoustic resonance method was applied to measure the ultrasonic velocities and EMAT's were used for generating and detecting the ultrasonic waves.