Journal of the Korean Society for Nondestructive Testing (비파괴검사학회지)
- Volume 17 Issue 4
- /
- Pages.270-277
- /
- 1997
- /
- 1225-7842(pISSN)
- /
- 2287-402X(eISSN)
Evaluation of Plastic Anisotropy in the Steel Sheets Using EMAT
EMAT를 이용한 판재의 소성이방성 평가
- Ahn, B.Y. (Korea Research Institute of Standards and Science) ;
- Kim, Y.G. (Korea Research Institute of Standards and Science) ;
- Lee, S.S. (Korea Research Institute of Standards and Science)
- 안봉영 (한국표준과학연구원 방재기술연구센터 비파괴평가그룹) ;
- 김영길 (한국표준과학연구원 방재기술연구센터 비파괴평가그룹) ;
- 이승석 (한국표준과학연구원 방재기술연구센터 비파괴평가그룹)
- Published : 1997.12.30
Abstract
Plastic anisotropy is one of important factors which determine the drawability of a steel sheet. It has been mainly measured by mechanical tensile test. From the ultrasonic velocities propagating along the relative directions to the rolling direction, CODF(crystallite orientation distribution function) can be measured and ODC's(orientation distribution coefficients) has some correlations with the plastic anisotropy. In this study the correlations between the plastic anisotropy and ODC's of the cold rolled steel sheet were measured. From the results of ultrasonic velocity measurements the average normal anisotropy,
소성이방성은 판재의 가공성을 결정하는 중요한 인자로써 주로 기계적인 인장시험에 의해 측정되고 평가되어 왔다. 압연 방향에 대하여 상대적인 방향으로 진행하는 초음파의 속도로부터 집합조직의 결정분포함수를 구할 수 있으며, 결정분포함수의 계수인 결정방위계수는 소성이방성의 평균값들과 상관 관계를 갖는다. 본 실험에서는 초음파 속도로 구한 결정방위계수와 압연강판의 소성이방성을 비교하여 서로의 상관 관계를 구하였으며, 측정결과 average normal anisotropy,
Keywords