• 문화기술의 융합
• /
• 제10권3호
• /
• pp.7-11
• /
• 2024

욕창 예방 방석은 휠체어 사용자 둔부의 피부가 휠체어 좌석과 마찰을 통하여 손상되는 것을 방지하는 역할을 한다. 휠체어 좌석에 가해지는 체중의 부하를 일부 흡수하고 체중이 균일하게 전체 접촉면에 작용할 수 있도록 하기 때문이다. 욕창 예방 방석의 성능을 시험하는 항목의 일부인 충격시험을 위해서는 휠체어 사용자의 앉은 자세를 대신한 둔부 모형이 필요하다. 본 연구에서는 휠체어용 욕창 예방 방석의 충격시험을 위한 둔부 모형을 시험 제작하였다. 휠체어용 욕창 예방 방석의 성능 시험에는 한국 표준인 KSP 0236과 ISO의 국제표준인 KS P ISO 16840-2가 있으며, 휠체어용 욕창 예방 방석 충격시험에는 KS P ISO 16840-2에서 제안한 둔부 모형이 더 적합하였다. 그러나 KS P ISO 16840-2에서 제안한 둔부 모형의 제작 지침은 모형 제작 기술의 발전을 반영하여 더 쉬운 방법으로 수정이 필요하다. 우리는 플라스틱으로 둔부 모형을 한 번에 제작하고, 모형의 중량을 인체에 유사하게 만들기 위하여 둔부 모양으로 가공한 SS-41 철판을 추가로 부착하는 새로운 둔부 모형 제작 방법을 제안한다.

• 자원ㆍ환경경제연구
• /
• 제18권2호
• /
• pp.279-309
• /
• 2009

산업에서 발생되는 온실가스를 줄이기 위해서는 각 산업별 온실가스 발생량을 정확히 예측해야 한다. 이에 본 연구에서는 2003년 산업연관표와 에너지 사용량 통계자료를 기초로 401개 산업별 직 간접 $CO_2$ 원단위를 산출하고 이를 활용하는 방안을 검토하였다. 본 연구는 국내에 없는 일부 데이터 대신 해외 데이터 사용, 석유정제부문에 대한 분배 문제, 카본뉴트럴 측면에서 재검토 필요성, 폐기물처리 부문 과정의 일부 미고려 등에 따른 결과의 한계를 가지고 있다. 그럼에도 불구하고 부산물로 얻어지는 코크스로가스나 철강계 가스, 자원순환 관점에서 주목받고 있는 폐기물 영향까지를 고려한 401개 상세 산업별 직 간접 $CO_2$ 원단위를 산출했다는 측면에서 의미가 있다. 산업별 $CO_2$ 배출 원단위 분석 결과를 살펴보면, 간접 $CO_2$ 원단위가 크게 나타난 대표적인 산업으로는 조강, 레미콘, 선재 및 궤조, 주철물, 철근 및 봉강 산업이다. 이들 산업은 직접 $CO_2$ 원단위가 큰 산업에서 생산된 원료물질을 이용하여 제품을 생산하고 있다. 직접 $CO_2$ 배출 원단위가 크게 나타난 대표적인 산업으로는 시멘트, 선철, 석회 및 석고 제품, 석탄화합물 등 자연으로부터 채취한 원광석 등을 이용하여 다른 산업에 유용한 원료물질로 정제하는 산업이었다. 본 연구 결과는 산업별 특성이 반영된 저감 목표치 산정, $CO_2$ 저감정책별 감축 잠재량 산정, 기업의 $CO_2$ 배출량 수준 파악 및 저감 목표량을 설정할 때 유용하게 활용될 수 있다. 그 밖에도 국내에서 활발히 연구되고 있는 환경경제통합계정, 산업별 물질흐름분석 분야에서 널리 응용될 수 있을 것이다.

• 대한가정학회지
• /
• 제50권7호
• /
• pp.67-79
• /
• 2012

This study analyzed the characteristics of morphing in fashion design through the documentaries on morphing and fashion. The characteristics of morphing in fine art, media, and design area were categorized as reversible metamorphosis, sequential dissolve and blurring of interpolation boundaries. The results were as follow in fashion design. Reversible metamorphosis showed an automatic silhouette transformation by remote control, the metamorphosis of folding method by wearer's own movements and the automatic silhouette transformation by the air pressurizing method. It represented the thoughts of omnipotence as in the feeling of the magical world, the human desire for control in life, the rationalization of magical thinking and imaginative power, the creation of a new dress space and the extension of dress function. Sequential dissolve showed juxtaposition in the same area by the time order, juxtaposition in virtual space through the computer graphics, the series of fashion photography by steel cut of the dress making process and the blending of digital film and fashion design. It represented the approach for the storytelling of fashion show, implication of creative fashion design process and the creation of organic forms and the feeling of fantasy through artificial technology. The blurring of interpolation boundary showed an overlay of different fabrics with transparent boundaries, an overlay of different patterns with transparent boundaries and the blending of fabrics through the visual mixing of color. It represented the obfuscation of the object, the connotation of the space order, the connotation of the extensive and various meanings and the integrative property of objects.

• 대한기계학회논문집B
• /
• 제26권9호
• /
• pp.1260-1266
• /
• 2002

In this study, to make an excellent heat pipe, the manufacturing technology of a sintered wick was investigated. Making a sintered wick is known to be very difficult but it has many advantages. For example, the porosity and pore size can be controlled and the capillary force is great. The mixture of copper and pore former powder was used as a wick material and ceramic-coated stainless steel was used as a mandrel which is necessary for vapor flow. To analyze the feature of the manufactured wick, not only porosity and pore size were measured but also the sintered structure was observed. A heat pipe with sintered wick was manufactured and the performance test of the heat pipe was performed in order to review cooling performance. The performance test results for the 4mm diameter heat pipe with the sintered wick shows the stability since the temperature difference between a evaporator and a condenser of the heat pipe is less than 4.4$^{\circ}C$, and thermal resistance is less than 0.7$^{\circ}C$/W, In the meantime the composite wick that is composed with sintered and woven wire was also examined. The heat transfer limit of the heat pipe with composite wick was enhanced about 51%~60% compare to the one with sintered wick.

• 한국지반환경공학회 논문집
• /
• 제15권1호
• /
• pp.13-23
• /
• 2014

본 연구에서는 연약지반의 지반개량과 오염물질정화를 동시에 수행 가능한 반응성 배수파일의 적용에 대한 지반공학적 특성을 평가하였다. 반응성 배수파일의 내부 반응물질로 사용되는 제강슬래그의 적용성을 확인하였으며, 내부 반응물질을 둘러싸고 있는 원통형 차단막 길이와 차단막 외부의 외부 배수층 설치에 따른 압밀거동을 분석하였다. 이를 위하여 반응성 배수파일이 타설된 지반을 모사할 수 있는 실험장비를 개발하였으며, 외부 배수층 유 무 및 차단막 길이를 변화시켜가며, 실내모형실험을 수행하였다. 실험결과, 차단막의 길이가 짧아질수록 압밀소요시간은 감소하는 것으로 나타났지만, 차단막 길이변화에 따른 압밀소요시간차이에 비해 외부 배수층 유 무에 따른 압밀소요시간의 차이가 더 큰 것으로 나타났다.

• 시스템엔지니어링학술지
• /
• 제14권1호
• /
• pp.72-82
• /
• 2018

Generally speaking, because of complexity of engineering process, the systems engineering may be not easy to understand clearly and not easy to perform also. The status of systems engineering infrastructure of the some Korean industry is not matured yet, i.e., the systems engineering process, method, tool and environment is not implemented consistently within the steel making industry. These difficulties are more severe at the concept and basic design phase than the detail design phase relatively. Korean industry has lots of development project for the precedented systems and usually has matured domain knowledge for the precedented systems. Even though there is a mature domain knowledge of the precedented systems, the development project will lead to failure under the condition of engineering system is not well equipped. For the project success, it is very important to have a proper engineering execution system especially for the concept design and basic phase, which has a high abstraction and a large influence on the whole project. This paper proposes a minimized design process that can be easily applied to the concept and basic design phase of the precedented systems, instead of complex system engineering processes. This paper also proposes the application case of the minimized design process and methods for a Blast Furnace System.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제20권7호
• /
• pp.135-147
• /
• 2015

Remediation of metal(loid)s-contaminated sites is crucial to protect human and ecosystem. Solidification and stabilization of metal(loid)s by the binder amendment is one of the cost-effective technologies. In this study, metal (loid)s in various field-contaminated soils obtained from steel-making, metal refinery and mining tillage were immobilized by the application of single binders such as diammonium phosphate (DAP), lime, and ladle slag. The efficiency of solidification and stabilization was evaluated by Toxicity Characteristic Leaching Procedure (TCLP) and the Standard, Measurements and Testing programme of European Union (SM&T) extraction processes. In terms of TCLP extraction, the binder was effective in order of lime > DAP > ladle slag. All binders were highly effective in the immobilization of Pb, Zn, Cu, Ni, and Cd. The increased immobilization efficiency is attributed to the increase in the Step III and IV fractions of the SM&T extraction. Lime and ladle slag were highly effective in the immobilization of the metal(loid)s, however, As release increased with DAP due to competition between the phosphate originated from DAP and arsenate. A further study is needed for the better immobilization of multi metal(loid)s using binary binders.

• 복식
• /
• 제52권4호
• /
• pp.65-73
• /
• 2002

This research is to reveal an aspect of costume culture interchange in the relationship of the early Chosun Dynasty, by considering the imported goods from Japan, of the trading goods derived by the trade diplomacy between the two countries in the early Korea-Japan relationship in the medieval era. The research results are as follows. A good-neighbor Policy in the early Chosun Dynasty was established by a link of a barbarian ban policy to blockade the frequent intrusion by Japanese barbarians. The exchange was the form of presenting a return present in return for a tribute to the Chosun Dynasty from the Japanese envoy, which has a polycentric characteristic. Pusanpo, Naipo, and Yumpo were designated as the open ports, which played a pivotal role in the Korea-Japan exchange. In trading goods between Korean and Japan. the imported goods from Japan to Korea were a wide variety of items primarily such as dyes, mordant, medicines, steel, spicers, etc. In particular, Somok used as a red mordant, which were intermediate goods to Southeast Asia, was the most heavily-traded items of imported goods from Japan. It had been consumed primarily as a raw material making the costume suit of the royal family and the aristocracy. The increased import of Somok was derived from a thought of preferred red color by our people. As its inflow was increased. the costumes tended to be luxurious In early Chosun Dynasty and resulted in social issues. This active trading from the early Chosun Dynasty caused from the communication of the Japanese envoy. In addition the study of the trading provided an opportunity that can glance at an aspect of the costume culture, though It was fractionary.

• 한국생산제조학회지
• /
• 제6권4호
• /
• pp.130-137
• /
• 1997

The demand for wire-cut EDM is increasing rapidly in the die and tool making industry. In this study machining characteristics such as machining rate, surface roughness, hand drum form and hardness of machined material are investigated experimentally under the conditions varing pulse on time, pulse off time, peak voltage, wire tension after fixing other conditions in SKD 11 and brass and brass workpiece. It was found that various operating conditions had significant influences on machining characteristics. But the hardness of workpiece was uneffected by operating conditions. Also it was obtained experimentally that brass workpeice had better machinability than SKD 11 one.dition according to the current(Ip) in an electric spark machine : 1) Electrode is utilized Cu and Graphite. 2) Work piece is used the material of carbon steel. The condition of experiment is : 1) Current is varied 0.7(A) to 50(A) and the time of electric discharging to work piece in each time is 30(min) to 60(min). 2) After the upper side of work piece was measured in radius(5$\mu$m) of stylus analyzed the surface roughness to ade the table and graph of Rmax by yielding data. 3) Electro wear ratio is : \circled1Cooper was measured ex-machining and post-machining by the electronic balance. \circled2The ex-machining of graphite measured by it, the post-machining was found the data from volume $\times$specific gravity and analyzed to made its table and graph on ground the data. 4) In order to keep the accuracy of voltage affected to the work piece was equipped with the A.V. R and the memory scope was sticked to the electric spark machine. 5) In order to preserve the precision of current, to get rid of the noise occured by internal resistance of electric spark machine and to force injecting for the discharge fluid , it made the fixed table for a work piece to minimize the work error by means of one's failure during the electric discharging.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2003년도 학술대회지
• /
• pp.630-633
• /
• 2003

국내 건설 산업에 있어 공항시설, 체육시설, 집회시설, 판매시설 등에 대한 수요가 증가하면서 무주대공간의 필요성이 증가되고 있는 추세이다. 우주대공간 구축에 있어,기존의 PEB(Pre-Engineered Building)구조나 Pipe Truss구조는 span이 커짐에 따라 철재중량이 급격히 증대되고 장스판에는 적용이 어려운 구조적 문제가 발생하게 된다. 이러한 문제를 해결하는 구조방법 중 하나로 Space Frame이 고려되고 있으나 아직 국내에서는 Space Frame에 대한 연구가 미흡하여 그 활용성이 높지 않은 실정이다. 본 연구에서는 공사비용, 공사기간, 시공성 등에서 여러 장정을 지닌 Space Frame을 소개하고 무주대공간 구축에 있어 Space Frame을 적용한 사례분석을 통하여 Space Frame의 특징을 조사하고자 하였다. 더 나아가 향후 국내 건설업계에 무한한 발전 가능성을 가진 Space frame의 기본적 특성과 다른 구법들과의 비교를 통해 장점을 확인함으로써 Space Frame에 대한 국내연구를 활성화시키고 향후 실무를 담당하는 현장에서 무주대공간으로서의 Space Frame의 활용을 높이고자 한다.