• Journal of Pharmaceutical Investigation
• /
• v.12 no.1
• /
• pp.1-11
• /
• 1982

Silver sulfadiazine has been introduced to replace silver nitrate in the topical treatment of extensive burns and this drug exerts a prominent antibacterial action against Pseudomonas aeruginosa. The compound is painless upon application and insufficient sulfadiazine is absorbed to cause crystalluria. The primary purpose of the study was to clarify the antimicrobial action of zinc sulfadiazine ointment in comparison with silver sulfadiazine ointment as well as the pharmaceutical properties of the zinc sulfadiazine preparations. The results are summerized as followings: 1) The optimum ratio of two substrate compounds for the synthesis of zinc sulfadiazine are 2 moles of sulfadiazine and 1 mole of zinc sulfate at pH 6.0. 2) The stability of zinc sulfadiazine ointment preparation by using polyethylene glycol base, Beeler's base or polyoxyl 40 stearate base was more stable than that of silver sulfadiazine preparations. 3) The antimicrobial action of zinc sulfadiazine exhibits a stronger antimicrobial activity than that of sulfadiazine against Staphylococcus aureus but the opposite is true against Pseudomonas aeruginosa.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.4
• /
• pp.618-624
• /
• 1989

Ultrasonically induced bubble formation in thermoplastic matrix was investigated experimentally and theoretically. polystyrene was saturated with nitrogen under the pressure of 0.2 to 3.45 MPa in a pressure chamber, followed by pressure release and ultrasonic bubble nucleation. Zinc stearate was added to polystyrene as the nucleating agent to induce heterogeneous nucleation. Various mixture of low density polyethylene and polyethylene wax was also saturated with the gas. The foamed specimens with or without ultrasonically induced bubble nucleation was modeled by modifying the classical nucleation theory. The rate of ultrasonic nucleation was predicted for homogeneous and heterogeneous nucleation at a conical cavity. This study showed that the heterogeneous and heterogeneous nucleation at a conical cavity. This study showed that the heterogeneous nucleation must be employed for ultrasonic production of bubbles in a viscous fluid and the homogeneous nucleation for ultrasonic production of bubbles in a low viscosity fluid.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.120-123
• /
• 1997

In this paper, we deal with the effect on magnetic properties when Nd is added to Sr ferrite bonded magnet. First, we choose SrO$_{n}$.Fe$_2$O$_3$(n=5.9), which is nonstoichiomatric composition, as specimen ferrite. Then, we add 5wt% polyvinyl alcohol and calcinate at 12$25^{\circ}C$ under $N_2$ environment for carbon coating on chemical compound specimen. After that we obtain 1.2${\mu}{\textrm}{m}$ single domain powder through grinding process for 18 hours. The single domain Sr ferrite Powder is well mixed with silage coupling and calcium stearate of 1wt% Then, it is kneaded by using polyamide12 as a binder and is pelleted. After adding Nd-Fe-B powder to the pelleted specimen, we injection-mould it under magnetic field by using anisotropic mould. Especially, when we add l3wt% Nd-Fe-B powder to the polyamide12, we obtain excellent magnetic propertiecs which are $_{B}$H$_{C}$=2.65KOe, Br=3.16KG and (BH)$_{max}$=2.61MGOeOeOeOeOe

• Computers and Concrete
• /
• v.23 no.5
• /
• pp.351-359
• /
• 2019

In this study, the calcium hydroxide, an inherent product of cement hydration, was treated using biomimetic carbonation method of incorporating stearic acid to generate the hydrophobic calcium carbonate on concrete surface. Carbonation reaction was carried out at various $CO_2$ pressure and temperatures and utilizing the Scanning Electron Microscope (SEM), chloride-ion penetration test apparatus, and compression test machine to investigate the hydrophobicity, durability, and mechanical properties of the synthesized products. Experimental results indicate that the calcium stearate may change the surface property of concrete from hydrophilicity to hydrophobicity. Increasing reaction temperature can change the particles from irregular shapes to needle-rod structures with increased shear stress and thus favorable to hydrophobicity and microhardness. The contact angle against water for the concrete surface was found to increase with increasing $CO_2$ pressure and temperature, and reached to an optimum value at around $90^{\circ}C$. The maximum static water contact angle of 128.7 degree was obtained at the $CO_2$ pressure of 2 atm and temperature of $90^{\circ}C$. It was also found that biomimetic carbonation increased the permeability, acid resistance and chloride-ion permeability of the concrete material. These unique results demonstrate that the needle-rod structures of $CaCO_3$ synthetized on concrete surface could enhance hydrophobicity, durability, and mechanical properties of concrete.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.3
• /
• pp.378-383
• /
• 2016

The objective of this study was to determine the effects of chromium methionine (Cr-Met) chelate supplementation on blood metabolites and fatty acid profile of beef from Holstein steers during late fattening period. Fifteen Holstein steers were allotted randomly into two groups including the control (non Cr-Met feeding, NCM, ave. body weight [BW] = $483{\pm}25.7kg$) and the treatment (Cr-Met feeding for 4 months, 4CM, ave. $BW=486{\pm}27.5kg$) group. The feeding amount of Cr-Met to animals was limited to 400 ppb/cow/d and was supplemented to total mixed ration. No difference in blood albumin, alkaline phosphatase, urea-nitrogen, calcium, creatine, glucose, total protein, triglyceride, and cholesterol were observed between the treatment groups (p>0.05). The level of high density lipoprotein was higher in the 4CM group than the NCM group, whereas low density lipoprotein was lower in the 4CM group (p<0.05). The fatty acid composition (caprate, laurate, myristate, pentadecanoate, palmitate, palmitoleate, margarate, cis-11 heptadodecanoate, stearate, oleate, trans-vaccenate, linoleate, cis-11 eicosenoate, docosa hexaenoic acid, and docosa pentaenoic acid) of the beef showed no difference between the two groups (p>0.05). The arachidonic acid level tended to be higher in the 4CM than the NCM group (p = 0.07). Cr-Met had no influence (p>0.05) on the ratio of saturated, unsaturated, unsaturated/saturated, monounsaturated/saturated and polyunsaturated/saturated fatty acids whereas the ratio of polyunsaturated fatty acids (PUFA) in the 4CM group was comparatively higher than the NCM group (p<0.05). This study concluded that feeding Cr-Met supplementation in 400 ppb/d to Holstein steers for 4 months during late fattening period can improve some blood metabolites and beef quality by increasing PUFA and gamma-linoleate compositions of beef.

• Electrical & Electronic Materials
• /
• v.10 no.5
• /
• pp.440-446
• /
• 1997

This research has been performed for the fabrication of high quality ferrite plastic magnet. The magnetic properties of S $r_{5.9}$F $e_2$ $O_3$ ferrite bonded magnets by injection moulding with a variety of applied magnetic field were investigated. 0.3wt% CaCO3, 0.2wt% $SiO_2$, 0.5wt% $Al_2$ $O_3$and 0.5wt% N $a_2$ $SiO_3$are added in order to improve the magnetic properties of Sr-ferrite plastic magnets during the powder fabrication. For carbon coating on chemical compound specimen, 5wt% polyvinyl alcohol is added, and then calcinated under $N_2$ environment of 12$25^{\circ}C$. The particle size is distributed from 0.9~1.2${\mu}{\textrm}{m}$ which approximates to the single domain. The obtained Sr ferrite powder is well mixed with silane coupling and calcium stearate of 1wt%. Nest, the specimen is pelleted after kneading each of them with polyamidel2 as a binder. When the temperature of injection and mould were 25$0^{\circ}C$ and 8$0^{\circ}C$ respectively at injection pressure of 200kgf/$\textrm{cm}^2$, the degree of orientation was 85.3% under the applied magnetic field of 12kOe. As the results, when the packing density of Sr ferrite powder was 90wt%, the magnetic properties of Sr ferrite bonded magnet were follows : $_{B}$ $H_{c}$=2.41kOe, Br=3.1kG, (BH)$_{max}$=2.21MgOe. Especially, the Sr-ferrite bonded magnet with 10wt% N $d_2$F $e_{14}$B additive were as follows : $_{B}$ $H_{c}$=2.57kOe, Br=3.14kG and (BH)$_{max}$=2.39MGOe.GOe.GOe.GOe.e.

• Analytical Science and Technology
• /
• v.30 no.4
• /
• pp.174-181
• /
• 2017

Bio-liquid is a liquid by-product of the hydrothermal carbonization (HTC) reaction, converting wet biomass into solid hydrochar, bio-liquid, and bio-gas. Since bio-liquid contains various compounds, it requires efficient sampling method to extract the target compounds from bio-liquid. In this research, fatty acid methyl ester (FAME) in bio-liquid was extracted based on hollow fiber supported liquid phase microextraction (HF-LPME) and determined by Gas Chromatography-Flame Ionization Detector (GC-FID) and Gas Chromatography/Mass Spectrometry (GC/MS). The well-known major components of biodiesel, including methyl myristate, palmitate, methyl palmitoleate, methyl stearate, methyl oleate, and methyl linoleate had been selected as standard materials for FAME analysis using HF-LPME. Physicochemical properties of bio-liquid was measured that the acidity was 3.30 (${\pm}0.01$) and the moisture content was 100.84 (${\pm}3.02$)%. The optimization of HF-LPME method had been investigated by varying the experimental parameters such as extraction solvent, extraction time, stirring speed, and the length of HF at the fixed concentration of NaCl salt. As a result, optimal conditions of HF-LPME for FAMEs were; n-octanol for extraction solvent, 30 min for extraction time, 1200 rpm for stirring speed, 20 mm for the HF length, and 0.5 w/v% for the concentration of NaCl. Validation of HF-LPME was performed with limit of detection (LOD), limit of quantitation (LOQ), dynamic range, reproducibility, and recovery. The results obtained from this study indicated that HF-LPME was suitable for the preconcentration method and the quantitative analysis to characterize FAMEs in bio-liquid generated from food waste via HTC reaction.

• Journal of Pharmaceutical Investigation
• /
• v.2 no.1
• /
• pp.31-39
• /
• 1972

국산산성백토(國産酸性白土)를 정제(錠劑)의 붕노제(崩努劑)로 개발(開發)하고자 종내(從來) 붕해제(崩解劑)로 사용(使用)해 오든 corn starch, calcium methylcellulose, kaolin, calcium silicate 및 Pectin과 국산산성백토(國産酸性白土)를 붕해제(崩解劑)로하고 정제(錠劑)의 주약성분(主藥成分)으로서는 불용성(不溶性)인 Ca-PAS KP II 를 택(澤)하였다. 이상(以上)의 각(各) 붕해제(崩解劑)의 一錠當(일정당) 함양(含量)을 0%에서 25%까지 7종(種)으로 달리하고 이것을 각각(各各) 사용(使用)하여 만든 과립(顆粒)의 입자도(粒子度)도 각각(各各) 4종류(四種類)로 분류(分類)하였다. 여기에 활택제(滑澤劑) 로서 0.5% mg-stearate를 공통(共通)으로 첨가(添加)하였다. 이상(以上)을 각각(各各) 동일(同一)한 조건하(條件下)에서 타정(打錠)하여 수종(數種)의 정제(錠劑)를 만들었다. 이들 정제(錠劑)에 대(對)하여 경도(硬度)및 붕해도시험(崩解度試驗)을 하여 비교검토(比較檢討)한 결과(結果) 다음과 같은 결론(結論)을 얻었다. 1. Corn starch는 우수(優秀)한 붕해제(崩解劑)이나 그첨가량(添加量)이 8%이상(以上)이 될 때 는 타정시(打錠時) 압력(壓力)을 받지 않어 정제(錠劑) 붕해제(崩解劑)로서 사용(使用)할 수 없었다. 2. Ca-Mc는 붕해제(崩解劑)로서 첨가량(添加量)이 8%이상(以上) 일때에도 사용가능(使用可能) 하였으나 15%이상(以上) 일때는 타정시(打錠時) 압력(壓力)이 약(弱)해졌다. 3. Kaolin 붕해제(崩解劑)로서 부적당(不適當) 하다고 사려(思慮)되였다. 4. Ca-silicate도 붕해제(崩解劑)로서 적당(適當)하였으나 Pectin은 가장 부적당(不適當)하였다. 5. 산성백토(酸性白土)는 정제붕해제(錠劑崩解劑)로서 타정시(打錠時) 25% 첨가시(添加時)에도 압력(壓力)을 잘 받어 정제(錠劑)의 경도(硬度)를 유지(維持)할수 있었을 뿐만 아니라 붕해도(崩解度)도 양호(良好)한 성적(成績)을 나타내여 가장 우수(優秀)한 붕해제(崩解劑)임을 확인(確認)하였다. 6. 일반적(一般的)으로 타정(打錠)에 사용(使用)되는 과립(顆粒)의 size가 적을수륵 붕해시간(崩解時間)은 짧았으며 정제(錠劑)의 경도(硬度)가 높을수록 붕해시간(崩解時間)은 길었다. 그러나 정확(正確)한 비예성(比例性)은 찾기힘들었다.

• BMB Reports
• /
• v.45 no.1
• /
• pp.26-31
• /
• 2012

TRIM72 is known to play a critical role in skeletal muscle membrane repair. To better understand the molecular mechanisms of this protein, we carried out an in vitro binding study with TRIM72. Our study proved that TRIM72 binds various lipids with dissociation constants ($K_d$) ranging from 88.2 ${\pm}$ 9.9 nM to 550.5 ${\pm}$ 134.5 nM. In addition, the intrinsic fluorescence of TRIM72 exponentially decreased when the protein was diluted with stirring. The time-resolved fluorescence decay occurred in a concentration-independent manner. The fluorescence-decayed TRIM72 remained in its secondary structure, but its binding properties were significantly reduced. The dissociation constants ($K_d$) of fluorescence-decayed TRIM72 for palmitate and stearate were 159.1 ${\pm}$ 39.9 nM and 355.4 ${\pm}$ 106.0 nM, respectively. This study suggests that TRIM72 can be dynamically converted by various stimuli. The results of this study also provide insight into the role of TRIM72 in the repair of sarcolemma damage.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.1
• /
• pp.72-77
• /
• 2015

In this study, anti-foaming agents of a fatty acid methyl esters was synthesized and confirmed by FT-IR and $^1H-NMR$ spectroscopy. Synthesized material of characteristic of -C=O group having a $1740cm^{-1}$ and -C-O group $1175cm^{-1}$ peak by using FT-IR, and it was confirmed that k. Surface tensions were measured by surface tensiometer CBVP-43. Their surface tension values was 17.7 to 21 dyne/cm. Anti-foaming abilities in the SLS solution was measured through the Ross-Miles method. Performance of the 4 type of anti-foaming agent was determined and the best anti-foaming agent was prepared using stearic acid methyl.