• 대한기계학회논문집B
• /
• 제30권12호
• /
• pp.1196-1202
• /
• 2006

A MEMS methanol reformer was fabricated and its performance was evaluated in the present study. Catalytic steam reforming of methanol was selected because the process had been widely applied in macro scale reformers. Conventional Cu/ZnO catalyst that was prepared by co-precipitation method to give the highest coating quality was used. The reactor structure was made by bonding three layers of glass wafers. The internal structure of the wafer was fabricated by the wet-etching process that resulted in a high aspect ratio. The internal surface of the reactor was coated by catalyst and individual wafers were fusion-bonded to form the reactor structure. The internal volume of the microfabricated reactor was $0.3cm^3$ and the reactor produced exhaust gas with hydrogen concentration at 73%. The production rate of hydrogen was 4.16 ml/hr that could generate power of 350 mW in a typical PEM fuel cell.

• Corrosion Science and Technology
• /
• 제14권6호
• /
• pp.325-330
• /
• 2015

Pipe wall-thinning by flow-accelerated corrosion (FAC) is a significant and costly damage of secondary system piping in nuclear power plants (NPPs). All NPPs have their management programs to ensure pipe integrity from wall-thinning. This study analyzed the pipe wall-thinning caused by changing the amine, which is used for adjusting the water chemistry in the secondary system of NPPs. The pH change was analyzed according to the addition of amine. Then, the wear rate calculated in two different amines was compared at the steam cycle in NPPs. As a result, increasing the pH at operating temperature (Hot pH) can reduce the rate of FAC damage significantly. Wall-thinning is affected by amine characteristics depending on temperature and quality of water.

• 산업기술연구
• /
• 제29권B호
• /
• pp.215-219
• /
• 2009

Based on the data interpretation on an artificial marsh built in Chun-cheon Lake, the study analyzed flow characteristics and found that flow was unstable due to sediment of natural river but the effect of artificial marsh was similar with that of river improvement works. Flow velocity in the section of artificial marsh was found to be 1m/sec. Therefore flow velocity was stable, which could contribute to improving water quality. A flow velocity as well as stream vector was improved.

• Journal of Advanced Marine Engineering and Technology
• /
• 제16권5호
• /
• pp.6-16
• /
• 1992

Since world-wide oil shock on 1970s, many large size-low speed diesel engines, instead of steam turbines, are used for the industrial electric power generating plants due to their economic advantage of low specific fuel consumption. But it is very important to control their electric power fluctuation problems for the purpose of smooth parallel operation with existing power plants. In this paper the fluctuation problem of KEPCO Nam-cheju No.1 generator driven by diesel ngine(B & W 7K 60MC, 13931x138.5RPM) is investigated with analysis of torsional vibration of which 4th harmonic component is related to its power fluctuation. The problem can be improved by modification of cylinder arrangement and flywheel position in reverse sequence, equalizing the combustion gas pressure of all cylinder and installation of torsional vibration damper enlarged 30%(Je=7287Kg.m$^{2}$) and high quality balancing of generator rotor.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1995년도 제2회 단조심포지엄 단조기술의 진보
• /
• pp.25-34
• /
• 1995

Large-scale low-alloy steel shafts, used in the manufacture of steam turbine, are produced by ingot making, forging and heat treatemtn processes. The numerical analysis techniques are introduced to analyze and design the working conditions in each process. The solidification of a steel ingot is studied through the finite element method. The open die press forging and quenching process are simulated by viscoplastic and elastic-plastic finite element method, respectively. Thus numerical analysis techniques are very useful tools to study favorable working conditions for better and more desirable product quality.

• Journal of Mechanical Science and Technology
• /
• 제20권5호
• /
• pp.717-727
• /
• 2006

The present study experimentally investigated the effect of flow direction and other flow parameters on two-phase flow distribution of refrigerants at a T-junction, and also suggested a prediction model for refrigerant in a T-junction by modifying previous model for air-water flow. R-22, R-134a, and R-410A were used as test refrigerants. As geometric parameters, the direction of the inlet or branch tube and the tube diameter ratio of branch to inlet tube were chosen. The measured data were compared with the values predicted by the models developed for air-water or steam-water mixture in the literature. We propose a modified model for application to the reduced T-junction and vertical tube orientation. Among the geometric parameters, the branch tube direction showed the biggest sensitivity to the mass flow rate ratio for the gas phase, while the inlet quality showed the biggest sensitivity to the mass flow rate ratio among the inlet flow parameters.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.256-261
• /
• 2001

Corrosion and tensile properties of zircaloy-4 cladding tube having a laser welding part in elevated temperature are studied to present the criterion of quality evaluation in nuclear reactor and to found the scientific basis of SCC, with laser welding method using by coupling up cladding tube to end cap. In the result of tensile test($400^{\circ}C$), the fracture is not happened in the welding part but base metal and the result of corrosion test($400^{\circ}C$ 1500psi steam), corrosion rate of the molten zone and PMZ is a little higher than the other zone.

• Fisheries and Aquatic Sciences
• /
• 제11권3호
• /
• pp.140-148
• /
• 2008

We compared the quality and quantity of volatile components in salt-dried croakers prepared by different methods and obtained from different locations. In total, 110 compounds were found among regular- and delay-type salt-dried croakers purchased from two locations in Hong Kong. The major chemical classes included miscellaneous compounds(17), pyrazines(16), alcohols(15), and sulfur-containing compounds(13). Fish obtained in different locations but prepared by the same method differed only slightly in the number of identified compounds. In general, fish prepared by the delay method had a larger number of compounds compared to fish prepared by the regular method. Further, a greater number and higher levels of compounds were found in the fish obtained from one of the two locations. Overall, the delay preparation method resulted in a greater number of compounds with stronger intensity compared to the regular method.

• Journal of Welding and Joining
• /
• 제20권6호
• /
• pp.72-72
• /
• 2002

Corrosion and tensile properties of zircaloy-4 cladding tube having a laser welding part in elevated temperature are studied to present the criterion of quality evaluation in nuclear reactor and find the scientific basis of SCC, with laser welding method using by coupling up cladding tube to end cap. In the result of tensile test(400℃), the fracture is not happened in the welding part but base metal and the result of corrosion test(400℃ 1500psi steam), corrosion rate of the molten zone and PMZ is a little higher than the other zone.

• Journal of Welding and Joining
• /
• 제20권6호
• /
• pp.796-801
• /
• 2002

Corrosion and tensile properties of zircaloy-4 cladding tube having a laser welding part in elevated temperature are studied to present the criterion of quality evaluation in nuclear reactor and find the scientific basis of SCC, with laser welding method using by coupling up cladding tube to end cap. In the result of tensile test($400^{\circ}C$), the fracture is not happened in the welding part but base metal and the result of corrosion test($400^{\circ}C$ 1500psi steam), corrosion rate of the molten zone and PMZ is a little higher than the other zone.