• 한국수소및신에너지학회논문집
• /
• 제17권2호
• /
• pp.141-148
• /
• 2006

This study was carried out to analyze the microstructure characteristics of electrolyte membrane through XRD, SEM and AC impedance measurement for using in high temperature steam electrolysis(HTE). It was investigated that thermal stability and electric characteristics by sintering condition using dry and wet process, and confirmed growth of particle and density change by sintering temperature. The sintering temperature and behavior had an effect on the relative density of the ceramic and the average grain size. The more amount of dispersant in organic compound increase, the more the density increased. But the binder was shown opposite phenomenon. It was analyzed that electrolyte resistance and electrical characteristics using AC impedance. The electrical properties of YSZ grain boundary changed with the sintering temperature.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
• /
• pp.278-283
• /
• 2003

A generation rate of sludge in Korea had increased dramatically about 200 % for a decade. A requirement for high efficiency dewatering system being possible to produce the low water content cake have suggested due to the appearanceof commercial and social problems about handling of dewatered cake. The conventional dewatering system with mechanical compression device was not suitable to produce the low water content cake and didn'tcope with lots of requirements. Therefore, this paper was to develop the high efficient filter press with the compressive and heating forces through the heating plate to be built between membrane filter plates. It is possible to produce the low water content cake and improve the dewatering rate, so this equipment positively coped with several types of problems related to the sludge dewatering. The plate heated by heat transfer materials such as steam, hot water and thermo-oil made the sludge make the residual moisture within the cake to discharge easilyand to improve the dewatering efficiency of equipment. The pilot scale experiment with 500kg of cake production showed that the dewatering efficiency determined by the final water content and dewatering velocity was improved 30% more than the conventional dewatering equipment.

• 한국연소학회지
• /
• 제19권3호
• /
• pp.34-43
• /
• 2014

The reformer system is a method for hydrogen production from hydrocarbon fuels such as natural gas under high temperature environment($about{\sim}1,000^{\circ}C$). The premixed swirl burner with mixing swirler and combustion swirler designed to deliver fuel cell electric output from 0.5 kW to 1.5 kW. Premixed swirl burner experiments using natural gas and mixture of natural gas and anode off gas were carried out to analyse flame patterns and stability by equivalence ratio respectively. The results show that the stable swirl flame can be established for all cases of fuels type using the premixed swirl burner. The swirl flame had a wide stability region and it showed very low CO(50 ppm) and $NO_x$(20 ppm) emission at different fuel type and various equivalence ratio conditions. The operating range of premixed swirl burner for stable swirl flame is found to exist between equivalence ratio of 0.70 to 0.90 for turn down ratio of 3:1.

• 한국미생물·생명공학회지
• /
• 제3권3호
• /
• pp.135-140
• /
• 1975

방송이를 4% H$_2$SO$_4$,용액으로 1.5kg/$ extrm{cm}^2$에서 30분간 전가수분해 시키면 원료에 대한 당화율은 21%을 얻었으며 생성된 당화액에 효모 Candida를 배양한 결과 당이용율은 20.5%에 불과하며 생성당에 대한 균체량의 비율은 21.25%을 얻을 수 있었다.

• 한국미생물·생명공학회지
• /
• 제3권3호
• /
• pp.141-146
• /
• 1975

전가수분해가 끝난 밤송이에 74% H$_2$SO$_4$로 일차가수분해 시킨 후 1.5kg/㎤의 증기압하에서 40분간 가수분해 시킨 결과 원료에 대해서 49.3%의 당화율을 얻었으며 여기에 Candida utilis를 배양한 결과 당이용율은 60%이며 생성된 중량은 환원당의 62.47%이었다.

• Advances in concrete construction
• /
• 제11권4호
• /
• pp.307-314
• /
• 2021

Activated hwangtoh (ACT) is a natural resource abundant in South Korea, approximately 15.0% of soil. It is an efficient mineral admixture that has activated pozzolanic properties through high-temperature heating and rapid cooling. The purpose of this study is to improve a curb mixture that can reduce NOx outside and investigate durability performance. To this end, mortar curb specimens were manufactured by replacing OPC with ACT. The ACT substitution ratios of 0.0, 10.0, and 25.0% were considered, and mechanical and durability tests on the curb specimens were conducted at 28 and 91 days of age. Steam curing was carried out for three days for the production of curbs, which was very effective to strength development at early ages. The reduction in strength at early ages could be compensated through this process, and no significant performance degradation was evaluated in the tests on chloride attack, carbonation, and freezing and thawing. The mortar curb with an ACT of 10.0~25.0% replacement ratio exhibited clear NOx reduction through photocatalytic (TiO2) treatment. This is due to the increase in physical absorption through surface absorption and the photocatalyst-containing TiO2 coating. In this study, the reasonable range of the ACT replacement ratio for NOx reduction was quantitatively evaluated through a comprehensive analysis of each test.

• Korean Chemical Engineering Research
• /
• 제61권2호
• /
• pp.234-239
• /
• 2023

Waste from the food is a challenge to the environment all over the globe, hence there is need to be recycled. There is a great deal of renewable energy potential in the biomass of vegetables and fruits, which can be used to generate power and steam, as well as fuel for human consumption and laboratory solvents. To maintain the nutritional, antioxidative, and functional qualities of sapota fruit, wine was made by fermenting it with wine yeast (Saccharomyces cerevisiae). The wine's approximate composition was as follows: total soluble solids, 2.38°Brix; total sugar, 3.8 g/100 ml tartaric acidity (TA), 1.29 g tartaric acidity total phenolics, 0.21 g/100 mL; pH, 3.02; acid/100 mL; pH, 3.02; total phenolics, 0.21 g/100 mL; 22 g/100 ml -carotene; 1.78 g/100 ml ascorbic acid mg/100 ml; 0.64 mg/100 ml lactic acid; and The ethanol percentage is 8.23% (v/v). The sapota wine was delicious. A DPPH-scavenging 2, 2-diphenyl-1picryl hydroxyl (DPPH) at a dosage of 250 g/ml, the activity was 46%. Infrared alcohols, phenethylamines, and other compounds were discovered via spectroscopy.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.93-94
• /
• 2023

Through the industrial revolution that began in the 18th century, the amount of carbon dioxide in the atmosphere increased rapidly as humans used fossil energy such as coal and oil as fuel for steam engines and factory machines. The amount of carbon dioxide emitted while producing cement, the main material of concrete used in construction, is large enough to account for 5-8% of the world's carbon dioxide emissions. In this study, Non cement-based matrix were used to reduce carbon dioxide emissions from cement production. Red mud is an industrial by-product generated in the manufacturing process of aluminum hydroxide using bauxite, and more than 120 million tons are produced worldwide. In addition, red mud is a porous material that can be physically adsorbed, and causes a photocatalytic reaction of TiO₂ to remove harmful substances such as nitrogen oxide formaldehyde in the air and chemically adsorbs ammonia and hydrogen sulfide. Therefore, this study aims to examine the physical properties of the matrix by mixing red mud, an industrial by-product with good adsorption performance, into the Non cement-based matrix.

• Korean Chemical Engineering Research
• /
• 제45권6호
• /
• pp.656-662
• /
• 2007

고분자 전해질 연료전지 운전에 필요한 수소 공급 장치로서 플라즈마 개질 방법을 이용한 개질기와 일산화탄소 산화반응을 위한 전이 반응기를 설계 및 제작하였다. GlidArc 방전을 이용한 저온플라즈마 개질기는 Ni 촉매를 동시에 사용하여 $CH_4$ 개질함으로서 $H_2$ 선택도를 증대하였다. 개질기의 변수별 연구로서 촉매 온도, 가스 조성비, 전체 가스유량, 전압변화 그리고 개질 특성 및 최적 수소 생산조건을 연구하였으며, 전이반응기의 변수별 연구로서 선택적 산화반응기(PrOx)에 주입되는 공기량, 전이 반응기에 주입되는 수증기량 그리고 온도에 대하여 연구하였다. 플라즈마 개질기에서 최대 수소 생산 조건은 $O_2/C$ 비가 0.64, 가스유량은 14.2 l/min, 촉매 반응기 온도 $672^{\circ}C$ 그리고 유입전력이 1.1 kJ/L일 때 41.1%로 최대 수소 농도를 나타냈다. 그리고 이때의 $CH_4$ 전환율, $H_2$ 수율 그리고 개질기 에너지 밀도는 각각 88.7%, 54%, 35.2%를 나타냈다. 전이 반응기에서 모사된 개질 가스로부터 최대 CO 전환율을 보이는 조건은 2단으로 구성된 PrOx에 주입되는 $O_2/C$ 비가 0.3, HTS에서 주입되는 수증기 주입량 비가 2.8 그리고 HTS, LTS, PrOx I, PrOx II 반응기 온도가 475, 314, 260, $235^{\circ}C$ 일때 가장 높은 CO 전환율을 나타냈다. 플라즈마를 이용한 반응기는 예열 시간은 30분이 소요되었으며, 전이 반응기에서 나오는 최종 개질 가스의 조성은 $H_2$ 38%, CO<10 ppm, $N_2$ 36%, $CO_2$ 21% 그리고 $CH_4$ 4%로 나타냈다.

• 한국가스학회지
• /
• 제23권2호
• /
• pp.1-8
• /
• 2019

근래 환경 문제가 이슈화됨에 따라, 수소 에너지에 대한 관심 역시 빠르게 집중되고 있다. 특히 국내에서는 수소 에너지의 보급을 위하여 정부 주도 하, 수소전기차 및 수소충전소의 확산이 탄력을 받고 있다. 그러나 수소 에너지의 도입 취지에 부합하는, 실질적인 국내 환경성에 대한 기여도가 평가되어야 하지만, 기존 $CO_2$ 배출량 분석 방법의 대부분은 미국의 에너지 환경을 대표하여 개발되었으므로, 국내 현실에 그대로 적응하기에는 한계가 존재한다. 따라서 본 논문에서는 국내에서 수소 생산 시 배출되는 $CO_2$ 배출량을 평가하는 방식으로, 물질 수지 기반의 수치 계산 분석을 제안한다. 제안한 방법을 바탕으로 천연가스, LPG, 나프타를 원료로 개질 반응 및 전기분해, COG를 활용한 수소 생산 시 국내에서 발생하는 $CO_2$ 배출량을 분석하였다. 또한, 해당 결과를 GREET 프로그램 분석 결과를 비교하여 제안한 방법의 신뢰성을 확인해보았다.