• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.4
• /
• pp.709-714
• /
• 2022

The color change of the success of the steam sterilization indicator used in steam sterilization is currently being read by relying on the human eye. The result of color change on the success of sterilization can only be accurately read and judged by trained personnel. Developed an automatic reading system for steam sterilization indicators for the current human-dependent system, and developed an automatic reading device system for reading methods that were previously relied on with the human eye to develop a system that is more accurate and easier for anyone to read.

• Journal of Environmental Science International
• /
• v.21 no.8
• /
• pp.909-929
• /
• 2012

It is an after-school material for elementary school student based on STEAM education which has a theme of water pollution as a global issue. First of all, we take a look at various ways of measuring water pollution and among them, we include experiment for student to know about the water pollution by using indicator organisms. Next, we examine how some elements in our daily life affect on water and provide class with systematically technological and engineering solution. With this text book, we let the student recognize environmental problem and seek for the solution about it. Therefore, it helps student to connect with stream of thought.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.373-376
• /
• 2008

Industrial Steam Turbine first stage shell pressure is related to throttle flow. Theoretically, first stage shell pressure could, therefore, be measured and used as an index of turbine throttle flow. However, accurate flow measurements show that this pressure is not a reliable index of the actual flow. Data analysis of steam turbinessubjected to ASME acceptance tests shows that the use of first stage shell pressure as an index of throttle flow produced errors as large as 9.6 %. The mean of the errors was +2.2% with a standard deviation of ${\pm}$2.8 %. Applications that require an accuratedetermination of turbine steam flow, such as turbine acceptance testing, should, therefore, not rely on this method. Therefore, First stage shell pressure measurement serves as a valid and economical indicator of turbine throttle flow in cases where a high degree of accuracy in throttle flow measurement is not required but repeatability is desired, such as for boiler control. Generally speaking, Steam turbine first stage shell pressure may also be a very useful monitor of turbine performance when used with certain other turbine measurements.

• Journal of Science Education
• /
• v.38 no.3
• /
• pp.691-702
• /
• 2014

The purposes of this study were to develop the Interactive art STEAM program integrated science and art and to investigate the interest and perception of the elementary school students about the STEAM program. The Interactive art STEAM program was developed by the STEAM program team consisting of science education specialists, an art education specialist, and classroom teachers. The program included the science concepts which were relevant to the indicator reaction of acids and bases. The STEAM program had 3 steps: seeing the many interactive arts related to the program, and imitating the interactive arts, then creating new projects with the interactive art. The program was administered to a small class consisting of 11 $6^{th}$ grade students of an elementary school in S city. The results showed that Interactive art STEAM program improved students' interest about science and art classes. Also the students convinced that science and art could be integrated through the experiences of the Interactive art STEAM program. They were satisfied with the program and wanted to participate in another STEAM program.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2284-2289
• /
• 1998

The Rotor Stress Indicator is an integrated system of hardware and program components which has been designed to read an assortment of turbine temperature and speed input devices, perform an analysis of the temperature induced stresses and output pertinent temperature and stress information to guide the turbine operator during turbine prewarming, start-ups, load changes, and shut-downs. The purpose of the RSI is to provide guidance to the plant operator during startup, shutdown, loading, and unloading of the turbine. Since the stresses are a function of the temperature changes to which the turbine is exposed, the RSI also provides guidance for operation of the boiler main steam and reheat steam temperatures as they affect the rotor stresses. This may permit more efficient overall boiler turbine start-ups. In this paper, new rotor stress analysis algorithm for RSI is introduced and compared with present system which has been used in thermal power plant.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.10a
• /
• pp.403-410
• /
• 1995

A loss of the residual heat removal (RHR) accident during mid-loop operation of Yong-gwang Nuclear Units 3/4 was analyzed using the RELAP5/MOD3.1.2 code. In this work the following assumptions are used; (i) initially the reactor coolant system (RCS) above the hot leg center line is filled with nitrogen gas, (ii) two 3/4-inch diameter vent valves on the reactor vessel head and the top of pressurizer in the reactor coolant system are always open, and a level indicator is connected to the RMR suction line, (iii) the two steam generators are in wet layup status and the steam generator atmospheric dump valve assemblies are removed so that the secondary side pressure remains at nearly atmospheric condition throughout the accident, and (iv) the loss of RHR is presumed to occur at 48 hours after reactor shutdown. Findings from the RELAP5 calculations are (i) the core boiling begins at ∼5 min, (ii) the peak RCS pressure is ∼3.0 bar, which implies a possibility of temporary seal break, (iii) ∼94 % of the decay heat is removed by reflux condensation in the steam generator U-tubes in spite of the presence of noncondensable gas, (iv) the core uncovery time is evaluated to be 7.2 hours. Significant mass errors were observed in the calculations.

• Mass Spectrometry Letters
• /
• v.14 no.4
• /
• pp.160-165
• /
• 2023

Citronella oil, an essential oil extracted through steam distillation from the leaves and stems of Cymbopogon, is a natural complex substance (NCS) regulated by the Korean government for its use in insect repellents. The component ratios of NCSs like citronella oil vary due to differences in manufacturing processes and origins, presenting a challenge in identifying and quantifying these substances in consumer chemical products. This study analysed ten commercially available products of the most commonly used types of citronella oil, specifically Java and Ceylon types, using gas chromatography (GC)-mass spectrometry (MS) and GC with flame ionization detection (FID). Through chromatographic data, we aimed to determine the components that can qualitatively identify citronella oil and the indicator ingredients that can be used for content analysis.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.1
• /
• pp.93-99
• /
• 2016

The extraction efficiency depending on the extracting methods and the conditions of extraction was investigated. The common steam extraction was compared to the distillation extraction method. The effects of the samples size and the extraction time on the extract yield were also investigated by using UV-Vis spectrophotometer. One of the functional components of pine needle extract as the natural phenol base components were detected by the UV-VIS at around 235 nm wavelength range. The absorbance intensity at around 235 nm wavelength of the pine needle extract was used as the indicator of the extraction efficiency in this experiment. The distillation extraction showed the higher extract yield than the steam extraction. The grinding treatment of pine needles also resulted in the better extract performance, but the severe grinding showed a little decrease in the extract yield especially in case of the distillation extraction method. More than half of the extract was collected at the first stage of the extraction, that was the first 15 minutes in the total 60 minutes extraction.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.2
• /
• pp.110-115
• /
• 2010

This study was conducted to estimate the feasibility using thermal image measurement that is applicable to internal leak diagnosis for the power plant valve. Abnormal heating of valve surface associated with high temperature steam f10w toward valve outlet side in the condition of low temperature is a primary indicator of leakage problems in high temperature and pressure valves. Thermal imaging enables to see the invisible thermal radiation that may portend impending damage before their condition becomes critical. When steam flow in valve outlet side in the condition of low temperature is converted into heat transmitted through the valve body due to the internal leakage in valve. The existence of abnormally increasable leakage rate in the valve will result in abnormally high levels of heat to be generated that can be quickly identified with a thermal image avoiding energy loss or damage of valve component. From the experimental results, it was suggested that the thermal image measurement could be an effective way to precisely diagnose and evaluate internal leak situation of valve.

• Asian-Australasian Journal of Animal Sciences
• /
• v.4 no.3
• /
• pp.263-274
• /
• 1991

Digestibilities of nutrients and energy are among the most important parameters to be determined in feed evaluation research. The apparent digestibility coefficients (ADC) of protein, total carbohydrate (TCHO), fat, energy and amino acids were determined for 14 common feed ingredients using chromic oxide as external indicator with Israeli carp (Cyprinus carpio). The ingredients tested were; corn, corn starch, gelatinized starch, wheat middling, wheat grade inferior, corn gluten meal, rapeseed meal (solvent extracted), soybean meal (solvent extracted), blood meal (drum dried), feather meal(hydrolyzed), file fish meal (flame dried), sardine fish meal (steam dried), sardine fish meal (flame dried) and brewers yeast (dehydrated). The overall ADC values were high in Israeli carp showing high capacity to digest their feed ingredients irrespective of plant or animal sources. In addition the ADC of plant protein was high enough to support the successful supplementation of fish meal with other plant proteins.