• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2006년도 학술대회
• /
• pp.111-115
• /
• 2006

스케일러블 비디오 코딩(SVC, Scalable Video Coding)은 MPEG(Moving Picture Expert Group)과 VCEG (Video Coding Expert Group)의 JVT(Joint VIdeo Team)에 의해 현재 표준화 되고 있는 새로운 압축 표준 기술이며 시간, 공간 및 화질의 스케일러빌리티를 지원하기 위해 계층 구조를 가지고 있다. 특히 시간적 스케일러빌리티를 위해 계층적 B-픽처 구조를 채택하고 있다. 스케일러블 비디오 코딩의 기본 계층은 H.264|AVC와 호환적이므로, 모션 예측과 모드 결정과정에서 $16{\times}16,\;16{\times}8,\;8{\times}16,\;8{\times}8,\;8{\times}4,\;4{\times}8$ 그리고 $4{\times}4$와 같은 7개의 서로 다른 크기를 갖는 블록을 사용한다. 스케일러블 비디오 코딩에서 사용되고있는 계층적 B-픽처 구조는 키 픽처인 I와 P 픽처를 제외하고는 한 GOP (Group of Picture)내에서 모두 B-픽처를 사용하므로 H.264|AVC와 비교했을 때 연산량 증가와 함께 부호화 지연도 급격히 증가한다. B-픽처는 양방향 모션 벡터인 LIST0와 LIST1을 사용하고 양방향 모두에서 다중 참조 픽처를 사용하기 때문이다. 본 논문에서는 통계적 가선 검증을 이용하여 스케일러블 비디오 부호화에 적용 가능한 고속 프레임간 모드 결정 알고리듬 대해 소개한다. 제안된 방법은 $16{\times}16$ 매크로 블록과 $8{\times}8$ 서브 매크로 블록에 통계적 가설 감증 기법을 적용하여 실행되며, 현재 블록과 복원된 참조 블록간의 픽셀 값을 비교하여 RD(Rate Distortion) 최적화 기반 모드 결정을 빨리 완료함으로써 고속 프레임간 모드 결정을 가능하게 한다. 제안된 방법은 프레임 간 모드 결정을 고속화함으로써 스케일러블 비디오 부호화기의 연산량과 복잡도를 최대 57%감소시킨다. 그러나 연산량 감소에 따른 비트율의 증가나 화질의 열화는 최대 1.74% 비트율 증가 및 0.08dB PSNR 감소로 무시할 정도로 작다.

• The Journal of Advanced Prosthodontics
• /
• 제8권4호
• /
• pp.285-289
• /
• 2016

PURPOSE. This study evaluated the effect of chemical surface treatment using methyl formate-methyl acetate (MF-MA) solution on the tensile bond strength between acrylic denture teeth and auto-polymerized acrylic resin. MATERIALS AND METHODS. Seventy maxillary central incisor acrylic denture teeth for each of three different brands (Yamahachi New Ace; Major Dent; Cosmo HXL) were embedded with incisal edge downwards in auto-polymerized resin in polyethylene pipes and ground with silicone carbide paper on their ridge lap surfaces. The teeth of each brand were divided into seven groups (n=10): no surface treatment (control group), MF-MA solution at a ratio of 25:75 (v/v) for 15 seconds, 30 seconds, 60 seconds, 120 seconds, 180 seconds, and MMA for 180 seconds. Auto-polymerized acrylic resin (Unifast Trad) was applied to the ground surface and polymerized in a pressure cooker. A tensile strength test was performed with a universal testing machine. Statistical analysis of the results was performed using two-way analysis of variance (ANOVA) and post-hoc Dunnett T3 test (${\alpha}$=.05). RESULTS. The surface treatment groups had significantly higher mean tensile bond strengths compared with the control group (P<.05) when compared within the same brand. Among the surface treatment groups of each brand, there were no significantly different tensile bond strengths between the MF-MA groups and the MMA 180 second group (P>.05), except for the Yamahachi New Ace MF-MA 180-second group (P<.05). CONCLUSION. 15-second MF-MA solution can be an alternative chemical surface treatment for repairing a denture base and rebonding acrylic denture teeth with auto-polymerized acrylic resin, for both conventional and cross-linked teeth.

• The Journal of Advanced Prosthodontics
• /
• 제4권3호
• /
• pp.127-133
• /
• 2012

PURPOSE. Many dentists use desensitizing agents to prevent hypersensitivity. This study compared and evaluated the effect of two desensitizing agents on the retention of cast crowns when cemented with various luting agents. MATERIALS AND METHODS. Ninety freshly extracted human molars were prepared with flat occlusal surface, 6 degree taper and approximately 4 mm axial length. The prepared specimens were divided into 3 groups and each group is further divided into 3 subgroups. Desensitizing agents used were GC Tooth Mousse and $GLUMA^{(R)}$ desensitizer. Cementing agents used were zinc phosphate, glass ionomer and resin modified glass ionomer cement. Individual crowns with loop were made from base metal alloy. Desensitizing agents were applied before cementation of crowns except for control group. Under tensional force the crowns were removed using an automated universal testing machine. Statistical analysis included one-way ANOVA followed by Turkey-Kramer post hoc test at a preset alpha of 0.05. RESULTS. Resin modified glass ionomer cement exhibited the highest retentive strength and all dentin treatments resulted in significantly different retentive values (In Kg.): GLUMA ($49.02{\pm}3.32$) > Control ($48.61{\pm}3.54$) > Tooth mousse ($48.34{\pm}2.94$). Retentive strength for glass ionomer cement were GLUMA ($41.14{\pm}2.42$) > Tooth mousse ($40.32{\pm}3.89$) > Control ($39.09{\pm}2.80$). For zinc phosphate cement the retentive strength were lowest GLUMA ($27.92{\pm}3.20$) > Control ($27.69{\pm}3.39$) > Tooth mousse ($25.27{\pm}4.60$). CONCLUSION. The use of $GLUMA^{(R)}$ desensitizer has no effect on crown retention. GC Tooth Mousse does not affect the retentive ability of glass ionomer and resin modified glass ionomer cement, but it decreases the retentive ability of zinc phosphate cement.

• 대한치과기공학회지
• /
• 제35권2호
• /
• pp.121-126
• /
• 2013

Purpose: The aim of this research was to investigate difference in shear bond strengths of full-contour zirconia layered with porcelain. Methods: Disk-shaped (diameter: 12.0 mm; height: 3.0 mm) zirconia were randomly divided into six groups according to the surface conditioning method to be applied (N=90, n=15 per group): group 1-contol group(ZC); group 2-airborne particle abrasion with $50-{\mu}m\;Al_2O_3(5A)$; group $3-50-{\mu}m\;Al_2O_3$ + liner(5AL), group $4-110-{\mu}m\;Al_2O_3(1A)$; group $5-110-{\mu}m\;Al_2O_3$ + liner(1AL); group 6-liner(LC). On each block, zirconia porcelain was build up according to manufacturer's instructions. All samples were fixed with measuring jigs and shear bond strength were measured with Universal testing machine. Collected data were analyzed using SPSS(Statistical Package for Social Sciences) Win 12.0 statistics program. Results: LC showed the highest value($29.92{\pm}2.55$ MPa) and ZC showed the lowest value($13.22{\pm}1.37$ MPa). Zirconia liner and Alumina oxide groups was significantly higher shear bond strength than control(p<0.05). 5A (without liner $22.18{\pm}2.37$, with liner $22.84{\pm}1.74$ MPa) was higher shear bond strength than $110{\mu}m$ (without liner $20.18{\pm}2.38$, with $20.71{\pm}2.67$). Conclusion: Surface treatments may have advantage in bond strength improvement for full-contour zirconia layered with porcelain.

• 대한치과기공학회지
• /
• 제40권2호
• /
• pp.57-62
• /
• 2018

Purpose: The aim of this study is to evaluate composite resins of indirect restorations for testing of flexural strength according to various polymerization methods. Methods: Specimen was produced a total of 40 to 10 per each group with a length 25 mm, width 2 mm, thickness 2 mm using a Teflon zig. The polymerization groups were classified into four groups. The first group proceeded with light curing only(LC group). The second group proceeded with light and heat curing(LHC group). The third group proceeded with air press and light curing(ALC group). The fourth group proceeded with air press, light and heat curing(ALHC group). Each prepared group was evaluated by flexural strength test. Statistical analysis was performed by one-way ANOVA. Post-test was performed with Tukey test. Results: The lowest in the ALC group was 119.18 MPa and the highest in the ALHC group was 168.15 MPa. There were statistically significant differences. Conclusion : The composite resin of the indirect restoration is recommended to heat curing along with the air press.

• PNF and Movement
• /
• 제18권2호
• /
• pp.255-263
• /
• 2020

Purpose: The purpose of this study was to investigate the effect of proprioceptive neuromuscular facilitation (PNF) lower extremity pattern on the dominant leg on muscle activity of the lower extremity supported by the ground. Methods: The subjects were 20 healthy males living in Busan. All subjects performed four direction PNF lower extremity patterns, and data were collected by surface electromyography from the gluteus medius (GM), tensor fascia latae (TFL), vastus medialis oblique (VMO), vastus lateralis oblique (VLO), and semitendinosus (STD) muscles of the opposite lower extremity during PNF lower extremity pattern. The PNF lower extremity pattern applied to the dominant leg was (1) flexion/adduction/external rotation with knee flexion; (2) extension/abduction/internal rotation with knee extension; (3) flexion/abduction/internal rotation with knee flexion; and (4) extension/adduction/external rotation with knee extension pattern, repeated 3 times per pattern and using the average value of the collected results. Collected muscle activity values were analyzed by one-way ANOVA, and post-hoc Tukey testing was performed to check between-group differences. The statistical significance level was set at α = 0.05. Results: GM and TFL flexion/abduction/internal rotation pattern with knee flexion was significantly higher than other patterns. VMO and VLO extension/adduction/external rotation pattern with knee extension was significantly higher than other patterns. STD flexion/adduction/external rotation pattern with knee flexion was significantly higher than other patterns. Conclusion: The study confirms differences in lower extremity muscle activity for the PNF lower extremity pattern, indicating that selective muscle contraction induction is possible using a pattern appropriate to the purpose of treatment.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2011년도 정기 학술대회
• /
• pp.419-423
• /
• 2011

AE는 다른 비파괴 검사방법과 달리 가동 상태에서 구조물의 결함이 발생 및 성장을 검출 할 수 있으며, 연속 검사가 가능하다는 장점으로 인하여 대형 구조물의 안정성 평가에 널리 이용되고 있다. 하지만 AE는 20kHz부터 20MHz 사이에 발생하는 음파를 감지하기 위해 센서를 사용하며, 이 센서의 감도에 따라 결과가 달라질 가능성이 존재한다. 이에 본 연구에서는 STS 304와 SS400 강재에 인장실험을 실시하여, 강재의 균열 신호를 탐지하고자 한다. 인장실험에는 스테인리스강 및 탄소강 시편을 준비하였고, 감도가 다른 센서를 이용하여 동일한 인장실험을 실시하였다. 그리고 균열이 발생하는 13개의 신호 파라미터에 대해 군집분석을 실시하여 4가지 종류의 군집으로 분류하였다. 또한 기무가설을 이용한 통계분석을 통해 두 시험편이 다르지 않다는 것을 증명하였다. 이 결과를 바탕으로 본 실험에서 얻은 Waveform이 재료의 균열신호라는 신뢰성을 확인할 수 있었다.

• Journal of Korean Neurosurgical Society
• /
• 제48권6호
• /
• pp.506-517
• /
• 2010

Objective : We investigated whether Disability Evaluation (DE) situations influence patients' neuropsychological test performances and psychopathological characteristics and which variable play a role to establish an explanation model using statistical analysis. Methods : Patients were 536 (56.6%) brain-injured persons who met inclusion and exclusion criteria, classified into the DE group (DE; n = 300, 56.0%) and the non-DE group (NDE; n = 236, 44.0%) according to the neuropsychological testing's purpose. Next, we classified DE subjects into DE cluster 1 (DEC1; 91, 17.0%), DE cluster 2 (DEC2; 125; 23.3%), and DE cluster 3 (DEC3; 84, 15.7%) via two-step cluster analysis, to specify DE characteristics. All patients completed the K-WAIS, K-MAS, K-BNT, SCL-90-R, and MMPI. Results : In comparisons between DE and NDE, the DE group showed lower intelligence quotients and more severe psychopathologic symptoms, as evaluated by the SCL-90-R and MMPI, than the NDE group did. When comparing the intelligence among the DE groups and NDE group, DEC1 group performed worst on intelligence and memory and had most severe psychopathologic symptoms than the NDE group did. The DEC2 group showed modest performance increase over the DEC1 and DEC3, similar to the NDE group. Paradoxically, the DEC3 group performed better than the NDE group did on all variables. Conclusion : The DE group showed minimal "faking bad" patterns. When we divided the DE group into three groups, the DEC1 group showed typical malingering patterns, the DEC2 group showed passive malingering patterns, and the DEC3 group suggested denial of symptoms and resistance to treatment.

• Restorative Dentistry and Endodontics
• /
• 제33권3호
• /
• pp.224-234
• /
• 2008

이 연구의 목적은 6종의 자가부식 프라이머 접착시스템에서 제조사에서 추천한 프라이머 적용시간과 2배의 프라이머 적용시간에 따른 법랑질에 대한 미세전단 결합강도와 전자현미경적 소견을 비교하기 위하여 시행하였다. 이 연구의 결과 법랑질에 대한 자가부식 프라이머 접착제의 결합강도는 제조사에서 추천한 프라이머의 적용시간보다 프라이머의 적용시간을 2배 증가시킨 경우 높게 나타났으며, 특히 pH가 높은 프라이머를 사용하였을 때 통계학적으로 높은 결합강도를 나타내었다. 이는 법랑질에서 pH가 높은 프라이머를 사용할 경우, 제조사에서 추천한 시간보다 더 긴 시간동안 적용하는 것이 결합강도를 증가시킬 수 있을 것으로 생각된다.

• Journal of the Korean Data and Information Science Society
• /
• 제27권1호
• /
• pp.179-189
• /
• 2016

본 연구는 저소득층 아동들의 삶의 만족도와 자아존중감과의 관계에서 우울이 가지는 매개효과를 검증하는데 목적이 있다. 2013년 3월부터 4월까지 2개 광역시에 소재한 영구임대아파트에 거주하는 기초수급1, 2급 및 차상위계층 가정의 초등학교 5, 6학년 과 중학생 자녀 385명을 대상으로 설문을 실시하였다. 자료분석은 SPSS 20.0 프로그램을 이용하여 빈도분석, 기술통계 분석, 그리고 상관관계분석을 실시하였고, AMOS 20.0 프로그램을 이용하여 구조방정식 연구모형을 검증하였다. 그 결과 저소득층 자녀들의 자아존중감이 삶의 만족에 긍정적인 영향을 미치는 것으로 나타났다. 또한 자아존중감이 우울을 감소시키고, 감소된 우울은 삶의 만족도에 영향을 미치는 우울의 부분매개효과를 나타내었다. 이상의 연구결과에 기초하여 저소득층 아동의 자아존중감을 향상시키기 위한 이론적, 실천적, 정책적 합의가 필요함을 밝히는 바이다.