• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.1
• /
• pp.18-29
• /
• 2008

The purpose of this study was to compare the polymerization shrinkage of several filling methods using strain gauges. In this study, a light-emitting diode(LED) curing unit(Elipar Freeligh2, 3M EPSE, USA) and plasma arc lamp(PAL) curing unit(Flipo, LOKKI, France) were used for curing, Filtek $Z350^{TM}$(3M EPSE, USA) composite resin was used for the cavity filling. Sixty permanent bicuspid teeth, that were extracted for orthodontic treatment, were studied. The cavities were prepared on the occlusal surface and were filled using the following methods : 1) bulk filling, 2) parallel filling, 3) oblique filling The strain was recorded on the buccal, lingual, mesial and distal surfaces and the strain values were computed into stress values. The shear bond strength of each filling method was tested using a Micro Universal Testing machine. The results can be summarized as follows: 1. In the strain changes, all LED and PAL curing groups showed an increase on the buccal surface and a slow decrease as time elapsed. 2. In the strain changes of the mesial and distal surfaces, the decreases and increases were shown repeatedly and reduced as time elapsed. 3. There were no significant statistical strain changes among filling methods in the LED or PAL curing groups. 4. There were significant statistical strain changes between the LED and PAL curing groups on the buccal surface(p<0.05). 5. From the shear bond strength results, in the LED curing group, filling method 3 showed lower surface stress than filling method 1 and 2(p<0.05). In the PAL curing group, there were no significant statistical strain changes between each filling method. 6. The surface stress of each group was lower than the shear bond strength.

• Korean Security Journal
• /
• no.16
• /
• pp.243-264
• /
• 2008

Investigation about training of Private Security in Korea has managed status of training and understanding of issue mostly, systematic analysis about transfer effect as well as learning and determinant of training is insufficient. Consequently this investigation research to examine the effect of training program for newly appointed private security guards to learning and transfer then, to analyze factor through incumbent private security guard-oriented hypothesis testing under article 13, section 1 of the security guard law. To grasp effect factors of learning and transfer, this dissertation establishes research model and research hypothesis through domestic and foreign studies and then theoretical as well as positive literatures consideration in the first place. Conclusion of this investigation through techniques mentioned above and data analysis is as follows. First of all, the personal characteristics, training characteristics, work environment, difference of transfer as well as learning are verified in accordance with Sociodemographic characterist of Private Security Guard. After then, there is a difference of great import. Secondly, the effect of personal characteristics of Private Security Guard to the transfer is inspected. As a result, there is a difference of significance statistical. Thirdly, the effect of training characteristics of Private Security Guard to the transfer is inspected. Consequently, there is a difference of import statistical. The following thing, subsequent to inspection about the effect of work environment of Private Security Guard to transfer, statistical difference of import is.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.5
• /
• pp.345-352
• /
• 2016

As aircrafts are being operated at high altitude, wing structures experience various fatigue loadings under cryogenic environments. As a result, fatigue damage such as a crack could be develop that could eventually lead to a catastrophic failure. For this reason, fatigue damage monitoring is an important process to ensure efficient maintenance and safety of structures. To implement damage detection in real-world flight environments, a special cooling chamber was built. Inside the chamber, the temperature was maintained at the cryogenic temperature, and harmonic fatigue loading was given to a wing structure. In this study, piezoelectric active-sensing based guided waves were used to detect the fatigue damage. In particular, a beamforming technique was applied to efficiently measure the scattering wave caused by the fatigue damage. The system was used for detection, growth monitoring, and localization of a fatigue crack. In addition, a sensor diagnostic process was also applied to ensure the proper operation of piezoelectric sensors. Several experiments were implemented and the results of the experiments demonstrated that this process could efficiently detect damage in such an extreme environment.

• Journal of muscle and joint health
• /
• v.6 no.1
• /
• pp.100-135
• /
• 1999

Typical symptoms of rheumatic disease affect overall daily living and cause severe stress. Individuals afflicted with rheumatic disease have many illness-related stresses. Pain was the predominantly perceived stress followed by limitation in mobility, difficulties in carrying out activities of daily living. helplessness, dependency on others, threat to self-esteem, interference in social activity, interference in family relationships. difficulties performing at work, and discomfort of the treatment. Patients with chronic arthritis are subjected to long periods of continuous stress, which may require the management by the health care provider. In these cases, the purpose of the nursing is helping to promote health through supporting patient's coping. Therefore, for the nursing intervention to be effective, it is critical to build a theoretical framework that describes stress-coping for chronic arthritis. Thus, the purpose of this dissertation is to present a theoretical framework which describes the stress-coping processes and to empirically test pathos of this framework for the people with chronic arthritis. The foundation upon which this framework is built in the Erickson, Tomlin, and Swain(1983) theory of Modeling and role-Modeling. The subjects were 275 patients with rheumatoid arthritis or osteoarthritis who visited the outpatient clinic. A hypothetical model of stress-coping was tested by covariance structure analysis with PC-LISREL 8.12 program. As a result, the overall fit was good(Chi-square=94.49, P=0.00, RMR=0.067, GFI=0.95, AGFI=0.91, NNFI=0.93, NFI=0.91) for the hypothetical model. The results of hypothesis testing were as follows : Basic need satisfaction had a statistically significant influence on illness-related experience, emotional stress and coping resources. Internal health locus of control had a statistically significant influence on coping resources. However, independent variables(basic need satisfaction, internal health locus of control, illness-related experience, emotional stress and coping resource) did not have significantly influence on coping. And then, the hypothetical model was modified by considering both the theoretical implication and statistical significance of the parameter estimates. The revised model had a better fit to the data(Chi-square=83.11(P=0.00), RMR=0.061, GFI=0.96, AGFI=0.92, NNFI=0.95, NFI=0.92). Hypothesis emerged from the revised model was tested. The results of hypothesis testing were as follows : Basic need satisfaction had a statistically significant influence on illness-related experience, emotional stress and coping resources. Internal health locus of control had a statistically significant influence on illness-related experience and coping resources. Internal health locus of control, illness-related experience, emotional stress and coping resources had a significantly influence on coping. According to the results of this dissertation, basic need satisfaction and internal health locus of control play a central role in appraisal of illness-related experience and coping resources. And illness related-experience, emotional stress, and coping resources affect on coping activities. In summary, nursing interventions to enhance basic need satisfaction and internal health locus of control will decrease illness related experience and emotional stress and increase coping resources. Increased coping resources will prompt coping activities.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.4
• /
• pp.351-359
• /
• 2011

In a structure, damage can occur at several scales from micro-cracking to corrosion or loose bolts. This makes the identification of damage difficult with one mode of sensing. Hence, a multi-mode actuated sensing system is proposed based on a self-sensing circuit using a piezoelectric sensor. In the self sensing-based multi-mode actuated sensing, one mode provides a wide frequency-band structural response from the self-sensed impedance measurement and the other mode provides a specific frequency-induced structural wavelet response from the self-sensed guided wave measurement. In this study, an experimental study on the pipeline system is carried out to verify the effectiveness and the robustness of the proposed structural health monitoring approach. Different types of structural damage are artificially inflicted on the pipeline system. To classify the multiple types of structural damage, a supervised learning-based statistical pattern recognition is implemented by composing a two-dimensional space using the damage indices extracted from the impedance and guided wave features. For more systematic damage classification, several control parameters to determine an optimal decision boundary for the supervised learning-based pattern recognition are optimized. Finally, further research issues will be discussed for real-world implementation of the proposed approach.

• Journal of the Korean Geographical Society
• /
• v.42 no.4
• /
• pp.616-631
• /
• 2007

Residential differentiation is an academic theme which has been given enormous attention in urban studies. This is due to the fact that residential segregation can be seen as one of the best indicators for socio-spatial dialectics occurring on urban space. Measuring how one population group is differentiated from the other group in terms of residential space has been a focal point in the residential segregation studies. The index of dissimilarity has been the most extensively used one. Despite its popularity, however, it has been accused of inability to capture the degree of spatial clustering that unevenly distributed population groups usually display. Further, the spatial indices of segregation which have been introduced to edify the problems of the index of dissimilarity also have some drawbacks: significance testing methods have never been provided; recent advances in spatial statistics have not been extensively exploited. Thus, the main purpose of the research is to devise a spatial separation measure which is expected to gauge not only how unevenly two population groups are distributed over urban space, but also how much the uneven distributions are spatially clustered (spatial dependence). The main results are as follows. First, a new measure is developed by integrating spatial association measures and spatial chi-square statistics. A significance testing method based on the generalized randomization test is also provided. Second, a case study of residential differentiation among groups by educational attainment in major Korean metropolitan cities clearly shows the applicability of the analytical framework presented in the paper.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.6
• /
• pp.599-610
• /
• 2001

Due to an increasing interest in esthetics and concerns about toxic and allergic reactions to certain alloys, patients and dentists have been looking for metal-free tooth-colored restorations. Recent improvement in technology of new all-ceramic materials and composite materials has broadened the options for esthetic single crown restorations. The aim of this investigation was to study the fracture strength of the metal-free posterior single crowns fabricated using two recently introduced systems, Empress 2 ceramic and Targis-Vectris. Forty premolar-shaped stainless steel dies with the 1mm-wide circumferential shoulder were prepared. Ten cylindrical crowns having a diameter of 8.0mm and total height of 7.5mm were fabricated for each crown system respectively(PFM, Empress staining technique, Empress 2 layering technique, and Targis- Vectris). The crowns were filled with cement and placed on the stainless steel dies with firm finger pressure. The crowns were then stored in distilled water at room temperature for 24 hours before testing. The crowns were tested for fracture strength in an Instron universal testing machine (Instron 6022). With a crosshead speed of 1mm/min the center of the occlusal surface of the crown was loaded using a 4-mm-diameter stainless steel ball until fracture occurred. The fracture surfaces of the crowns were gold coated and examined using scanning electron microscopy(Jeol JSM-840 Joel Ltd., Akishima, Tokyo, Japan). Within the parameters of this study the following conclusions were drawn: 1. The mean fracture strength for PFM crowns was 5829(${\pm}906$)N; for Empress staining technique the fracture strength was 1697(${\pm}604$)N; for Empress 2 Layering technique the fracture strength was 1781N(${\pm}400$)N, and the fracture strength for Targis- Vectris was 3093(${\pm}475$)N. 2. The fracture strength of the PFM crowns was significantly higher than that of the Empress 2 and the Targis-Vectris crowns (P<0.05). 3. The fracture strength of the Targis-Vectris crowns was significantly higher than that of the Empress 2 crowns (P<0.05). 4. No statistical difference was found when Empress staining technique was compared with Empress 2 layering technique. 5. The SEM image of fracture surface of Empress 2 crown showed a very dense microstructure of the lithium disilicate crystals and the SEM image of fracture surface of Targis-Vectris crown showed indentations of Vectris and some fibers tom off from Vectris.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.3
• /
• pp.199-205
• /
• 2018

Purpose: This study evaluated the effect of nonthermal plasma treatment on the bond strength of autopolymerizing relining resin to the injection molded thermoplastic denture base resins (TDBRs) with different surface treatments. Materials and methods: Acrylic Resin (Acrytone), Polyester (Estheshot-Bright), Polyamide (Valplast) and Polypropylene (Weldenz) were subjected to various surface treatments: No treatment, Nonthermal plasma, Sandblasting, Sandblasting and nonthermal plasma. Specimens were bonded using an autopolymerizing relining resin. Shear bond strength was tested using universal testing machine with crosshead speed of 1 mm/min. Statistical analysis by two-way analysis of variance with Tukey's test post hoc was used. Results: Acrytone showed significantly higher shear bond strength value among other TDBR group while Weldenz had the lowest. The sandblasting and nonthermal plasma condition had significantly higher shear bond strength value in all of the resin groups (P < .05). Conclusion: The use of nonthermal plasma treatment showed limited effect on the shear bond strength between TDBRs and relining resin, and combination of nonthermal plasma and sandblasting improved the shear bond strength between TDBR and reline material.

• Child Health Nursing Research
• /
• v.7 no.3
• /
• pp.280-297
• /
• 2001

The purpose of the study was to develop and test the model for the quality of life in mothers of children with nephrotic syndrome. A hypothetical model was constructed on the basis of previous studies and a review of literature. The conceptual framework was built around ten constructs. Exogenous variables included in this model were mother's health, father's health, marital intimacy, mother's attitude on children, economic state, side effect of steroid, severity of illness and social support. Endogenous variables were mother's burden and quality of life. Empirical data for testing the hypothetical model were collected by using a self-report questionnaire from 152 mothers of children with nephrotic syndrom at the outpatient clinics and in the hospital. The data was collected from May, 1999 to August, 1999.Reliability of the seven instruments was tested with Cronbach's alpha which ranged from 0.71 - 0.92.For the data analysis, SPSS 8.0 WIN program and LISREL 8.20 WIN program were used for descriptive statistics and covariance structural analysis. The results of covariance structural analysis were as follow :1. The hypothetical model showed a good fit with the empirical data. [x2 = .56, df = 3, p = .90(p>.05 ), GFI = .99, AGFI = .99, RMSR = .005.] 2. For the parsimony of model, a modified model was constructed by deleting 1 variable and excluding 2 paths according to the criteria of statistical significance and meaning.3. The modified model also showed a good fit with the data[x2 = 2.83, df = 7, p = .90( p>.05 ), GFI = 1.00, AGFI = .97, RMSR = .011].The result of the testing of the hypothesis were as follows : 1. Mother's health(γ21 = .26, t = 4.16), father's health(γ22 = .19, t = 2.92), marital intimacy(γ23 = .26, t = 4.13) and social support(γ28 = .12, t = 2.03) had a significant direct effect on the quality of life.2. Mother's burden(β21 = -.20, t = -3.10) had a significant negative direct effect on the quality of life.3. Mother's attitude on children(γ14 = -.34, t = .-4.57), mother's health(γ11 = -.22, t = -2.96) and side effect of steroid (γ16 = -.23, t = .-2.69) had a significant direct negative effect on the burden. The result of this study showed that mother's health, marital intimacy, mother's burden, father's health, and social support had a significant direct effect on the quality of life. Mother's attitude on children, mother's health, and side effect of steroid had a significant direct effect on mother's burden. These six variables, mother's health, marital intimacy, father's health, social support, mother's attitude on children and side effect of steroid were identified as relatively important variables. The results of this study suggest, it needed to determine the nursing intervention will alleviate mother's burden and promote a greater quality of life in mothers of children with nephrotic syndrom.

• The korean journal of orthodontics
• /
• v.39 no.6
• /
• pp.393-401
• /
• 2009

Objective: The purpose of this study was to compare the shear bond strength (SBS) of brackets and microleakage of a tooth-adhesive-bracket complex bonded with a direct and an indirect bonding technique after thermocycling. Methods: Fifty non-carious human premolars were divided into two equal groups. In the direct bonding group a light-cured adhesive and a primer (Transbond XT) was used. In the indirect-bonding group, a light-cured adhesive (Transbond XT) and chemical-cured primer (Sondhi Rapid Set) were used. After polymerization, the teeth were kept in distilled water for 24 hours and thereafter subjected to thermal cycling (500 cycles). For the microleakage evaluation, 10 teeth from each group were further sealed with nail varnish, stained with 0.5% basic fuchsin for 24 hours, and examined under a stereomicroscope. Fifteen teeth from each group were used for SBS testing with the universal testing machine and adhesive remnant index (ARI) evaluation. Data were analyzed using the Mann-Whitney U test, Chi-square test, and Fisher's exact test. Results: There were no statistical differences on SBS and microleakage between the two bonding techniques. The indirect bonding group had a significantly lower ARI score. Bracket failures were obtained between enamel-resin interfaces. Conclusions: The type of bonding technique did not significantly affect the amount of microleakage and SBS.