• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.191-198
• /
• 2009

Statement of problem: Ceramics have been important materials for the restoration of teeth. The demands of patients for tooth-colored restorations and the availability of various dental ceramics has driven the increased use of new types of dental ceramic materials. Improved physical properties of theses materials have expanded its use even in posterior crowns and fixed partial dentures. However, ceramic still has limitation such as low loading capability. This is critical for long-span bridge, because bridge is more subject to tensile force. Purpose: The wire reinforced ceramic was designed to increase the fracture resistance of ceramic restoration. The purpose of this study was to evaluate the fracture resistance of wire reinforced ceramic. Material and methods: Heat pressed ceramic(ingot No.200 : IPS Empress 2, Ivoclar Vivadent, Liechtenstein) and Ni-Cr wire(Alfa Aesar, Johnson Matthey Company, USA) of 0.41 mm diameter were used in this study. Five groups of twelve uniform sized ceramic specimens(width 4 mm, thickness 2 mm, length 15 mm) were fabricated. Each group had different wire arrangement. Wireless ceramic was used as control group. The experimental groups were divided according to wire number and position. One, two and three strands of wires were positioned on the longitudinal axis of specimen. In another experimental group, three strands of wires positioned on the longitudinal axis and five strands of wires positioned on the transverse axis. Three-point bending test was done with universal testing machine(Z020, Zwick, Germany) to compare the flexural modulus, flexural strength, strain at fracture and fracture toughness of each group. Fractured ceramic specimens were cross-sectioned with caborundum disc and grinded with sandpaper to observe interface between ceramic and Ni-Cr wire. The interface between ceramic and Ni-Cr wire was analyzed with scanning electron microscope(JSM-6360, JEOL, Japan) under platinum coating. Results: The results obtained were as follows: 1. The average and standard deviation in flexural modulus, flexural strength and fracture toughness showed no statistical differences between control and experimental groups. However, strain was significantly increased in wire inserted ceramics(P<.001). 2. Control group showed wedge fracture aspects across specimen, while experimental groups showed cracks across specimen. 3. Scanning electron microscopic image of cross-sectioned and longitudinally-sectioned specimens showed no gap at the interface between ceramic and Ni-Cr wire. Conclusion: The results of this study showed that wire inserted ceramics have a high strain characteristic. However, wire inserted ceramics was not enough to use at posterior area of mouth in relation to flexural modulus and flexural strength. Therefore, we need further studies.

• Journal of the Korean Society of Safety
• /
• v.10 no.3
• /
• pp.81-95
• /
• 1995

Now, safety assurance in construction sites should be accomplished by its own organization rather than control of the code or government. It is believed that the safety assurance can be considerably improved by a lecture or an education using the existing theories or literatures up to now, but it is thought that fundamental safety assurance we not able to be accomplished without developing safety devices '||'&'||' equipment or taking fundamental measures, based on the result analyzed from workers behaviors. There are various behaviors of the workers showed in construction site, but only tests for hammerusing works such as form, re-bar, stone workers directly related to the grip strength are mainly performed, investigated and measured here for the study. The above works are similar to power grip, 7th picture on seven items which are categorized for hand grip types(Ammermin 1956 ; Jones ; Kobrick 1958). Measurements of grip strength are commonly taken in anthropometric surveys. They are easy to administer but unfortunately it is rather dubious whether they yield any data that are of interest to the engineer. Very fewer controls of tools are grasped and squeesed studies showed very little overall correlation between grip strength and other measures of bodily strength (Laubach, Kromer, and Thordsen 1972), but hammer-using work which is practically progressed in construction site are mainly influenced with grip strength. According to the investigation on work measurement, it is shown that 77% of form worker are using hammer to be related to grip strength. In this study, it is particularly noticed that wearing safety gloves in construction site is required for workers safety but 20% difference between grip strength with safety gloves and without ones are commonly neglected in the site(Fig. 1). Nevertheless, safety operation with consideration of the above 20% difference is not considered in the construction site. Factors of age, kinds of work, working time, with or without safety gloves are in vestigated '||'&'||' collected at the sites for this study. Test, not at each working hour but at 14 : 00 when the almost all of the workers think the most tired, resulting from the questionaires, also when it is shown on the research report has been performed and compared for main kinds of works : form '||'&'||' re-bar work. Tests were performed with both left SE rightand of the workers simultaneously in construction site using Rand Dynamometer(Model 78010, Lafayette Instrument Co., Indiana, U.S.A) by reading grip strength on the gauge while they are pulling, and then by interviewing on their ages, works, experiences and etc., directly. The above tests have been performed for the dates of 15th march-26th May '95 with consideration of site condition. And even if various factors of ambient temperature on the testing date, working condition, individual worker's habit and worker's condition of the previous ate are concerned with the study. Those are considered as constants in this study. Samples are formwork 53, rebar 62, electrician 5, plumber 4, welding 1 from D construction Co., Ltd, ; formwork 12, re-bar 5, electrician 2, from S construction Co., Ltd, , formwork 78, re-bar 18, plumber 31, electrician 13, labor 48, plumber 31, plasterer 15, concrete placer 6, water proof worker 3, maisony 5 from B construction Co., Ltd. As In the previously mentioned, main aspect to be investigated in this study will be from '||'&'||' re-bar work because grip strength will be directly applied to these two kinds of works ; form '||'&'||' re-bar work, eventhough there are total 405 samples taken. It is thought that a frequency of accident occurrence will be mainly two work postures "looking up '||'&'||' looking down" to be mainly sorted, but this factor is not clarified in this study because It will be needed a lot of work more. Tests has been done at possible large scale of horizontally work-extended sites within one hour in order to prevent or decrease errors '||'&'||' discrepancies from time lag of the test. Additionally, the statistical package computer program SPSS PC＋has been used for the study.

• Restorative Dentistry and Endodontics
• /
• v.32 no.3
• /
• pp.208-221
• /
• 2007

The fracture toughness test is believed as a clinically relevant method for assessing the fracture resistance of the dentinal restoratives. The objectives of this study were to measure the fracture toughness $(K_{1C})$ and microtensile bond strength of dentin-resin composite interface and compare their relationship for their use in evaluation of the integrity of the dentin-resin bond. A minimum of six short-rod specimens for fracture toughness test and fifteen specimens for microtensile bond strength test was fabricated for each group of materials used. After all specimens storing for 24 hours in distilled water at $37^{\circ}C$, they were tensile-loaded with an EZ tester universal testing machin. Statistical analysis was performed using ANOVA and Tukey's test at the 95% confidence level, Pearson's coefficient was used to verify the correlation between the mean of fracture toughness and microtensile bond strength. FE-SEM was employed on fractured surface to describe the crack propagation. Fracture toughness value of Clearfil SE Bond (SE) was the highest, followed by Adper Single Bond 2 (SB), OptiBond Solo (OB), ONE-STEP PLUS (0S), ScotchBond Multi-purpose (SM) and there was significant difference between SE and other 4 groups (p < 0.05). There were, however, no significant difference among SB, OB, OS, SM (p > 0.05). Microtensile bond strength of SE was the highest, followed by SB, OB, SM, OS and OS only showed significant lower value (p < 0.05). There was no correlation between fracture toughness and microtensile bond strength values. FE-SEM examination revealed that dentin bonding agent showed different film thickness and different failure pattern according to the film thickness. From the limited results of this study, it was noted that there was statistically no correlation between K1C and ${\mu}TBS$. We can conclude that for obtaining the reliability of bond strength test of dentin bonding agent, we must pay more attention to the test procedure and its profound scrutiny.

• Journal of the Korean Society for information Management
• /
• v.36 no.1
• /
• pp.137-168
• /
• 2019

This study measures and analyzes the university library user's sense of community, service quality assessment, user satisfaction and loyalty. In addition, the effect of the university library user's sense of community on university library user satisfaction and loyalty mediated by the assessment of the quality of service is investigated. On the basis of study result, to improve user satisfaction and user loyalty, the direction and implications of library development are presented. In order to achieve the purpose of the study, precedent research and literature were investigated, and the study model and hypothesis were established based on theoretical background. In order to verify the hypothesis, a total of 300 questionnaires were distributed to subject who had experience using the Central Library among undergraduate students at the C National University, and the final 282 sample was used for analysis. To analyze the differences depending on the general characteristics of the samples, It is the result of an independent sample t-test and one-way ANOVA. The results of the mediated effects analysis using the PROCESS macro-programs models 4 and 6 of Hayes for hypothesis testing are as follows. First, The university library user's sense of community (Service Benefits Perception and Satisfaction, Mutual sense of influence) effect the user satisfaction of university library mediated by service quality assessment at statistical significance. This showed that the higher the university library user's sense of community, the higher the service quality assessment, and the higher the user satisfaction level of university library. Second, The university library user's sense of community (Service Benefits Perception and Satisfaction, Mutual sense of influence) effect the user loyalty of university library mediated by service quality assessment and user satisfaction. This showed that the higher the university library user's sense of community, the higher the service quality assessment, the higher user satisfaction level of university library and the higher the user loyalty level of university library. The results of this study showed that the university library user's sense of community has a direct and indirect effect on enhancing user satisfaction and loyalty through the service quality assessment.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.3
• /
• pp.231-238
• /
• 2022

Purpose. This study aimed to investigate the effect of different veneering methods on the tensile bond strength between polyetherketoneketone (PEKK) and denture base resins. Materials and methods. A total of 80 PEKK T-shaped specimens were fabricated and the primer (Visio.link) was applied after airborne-particle abrasion with 110 ㎛ alumina oxide powder. According to the veneering method, the specimens were divided into four groups (n = 20) to be veneered with the gingival colored packable photopolymerized composite resin (SR Adoro); flowable photopolymerized composite resin, (Crea.lign); heat-polymerized resin (Vertex); and self-polymerized resin (ProBase Cold). Each group was divided into two subgroups (n = 10) according to the artificial thermal aging. After the tensile bond strength measurement via universal testing machine, the fracture sections of all specimens were observed. Two-way ANOVA and Tukey's HSD post hoc test were used for the statistical analysis (α = .05). Results. The results of the two-way ANOVA showed statistically significant differences in the tensile bond strength according to the veneering method and artificial thermal aging of denture base resins (P<.001). The highest tensile bond strength showed in the packable photopolymerized resin group before and after the artificial thermal aging. The lowest tensile bond strength showed in the heat-polymerized resin group. The mixed and adhesive fracture showed in all groups. Conclusion. The veneering method and artificial thermal aging can influence in the tensile bond strength between the resin and PEKK. The artificial thermal aging can reduce the tensile bond strength.

• 한국체육학회지인문사회과학편
• /
• v.51 no.3
• /
• pp.373-382
• /
• 2012

The purpose of this study is to predict VO₂max with body index and submaximal metabolic responses. The subjects are consisted of 250 male aging from 18 to 34 and we separated them into two groups randomly; 179 for a sample, 71 for a cross-validation group. They went through maximal exercise testing with Bruce protocol, and we measured the metabolic responses in the end of the first(3 minute) and second stage(6 minute). To predict VO₂max, we applied multiple regression analysis to the sample with stepwise method. Model 1's variables are weight, 6 minute HR and 6 minute VO₂(R=0.64, SEE=4.74, CV=11.7%, p<.01), and the equation is VO₂max(ml/kg/min)= 72.256-0.340(Weight)-0.220(6minHR)+0.013(6minVO₂). Model 2's variables are weight, 6 minute HR, 6 minute VO₂, and 6 minute VCO₂(R=0.67, SEE=4.59, CV=11.3%, p<.01), and the equation is VO₂max(ml/kg/min)= 68.699-0.277(Weight) -0.206(6minHR)+0.020(6minVO₂)-0.009(6minVCO₂). And the result did not show multicolinearity for both models. Model 2 demonstrated more correlation compared to Model 1. However, when we conducted cross-validation of those models with 71 men, measured VO₂max and estimated VO₂ Max had statistical significance with correlation (R=0.53, 0.56, P<.01). Although both models are functional with validity considering their simplicity and utility, Model 2 has more accuracy.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.25 no.2
• /
• pp.80-98
• /
• 2023

This study explores the effectiveness of various data preprocessing algorithms for improving subseasonal to seasonal (S2S) climate predictions from six climate forecast models and their Multi-Model Ensemble (MME) using a deep learning-based postprocessing model. A pipeline of data transformation algorithms was constructed to convert raw S2S prediction data into the training data processed with several statistical distribution. A dimensionality reduction algorithm for selecting features through rankings of correlation coefficients between the observed and the input data. The training model in the study was designed with TimeDistributed wrapper applied to all convolutional layers of U-Net: The TimeDistributed wrapper allows a U-Net convolutional layer to be directly applied to 5-dimensional time series data while maintaining the time axis of data, but every input should be at least 3D in U-Net. We found that Robust and Standard transformation algorithms are most suitable for improving S2S predictions. The dimensionality reduction based on feature selections did not significantly improve predictions of daily precipitation for six climate models and even worsened predictions of daily maximum and minimum temperatures. While deep learning-based postprocessing was also improved MME S2S precipitation predictions, it did not have a significant effect on temperature predictions, particularly for the lead time of weeks 1 and 2. Further research is needed to develop an optimal deep learning model for improving S2S temperature predictions by testing various models and parameters.

• Journal of Venture Innovation
• /
• v.3 no.2
• /
• pp.111-128
• /
• 2020

Recently, in the process of globalization of companies, the use of third party logistics providers (3PL) has been strengthened. Therefore, the purpose of this study is to test the effectiveness of the logistics information system provided by 3PL companies. This study is to test the relationship between the effect of the characteristics of the 3PL logistics information system on the shipper's supply chain performance, that is, logistics performance, customer performance, and organizational performance, and the shipper's loyalty to the 3PL company, that is, 3PL corporate performance. In addition, long-term relationship orientation is to test whether there is a moderating effect between the shipper company and the 3PL company. Through this, this study aims to provide strategic implications for improving the competitiveness of 3PL companies. In this study, a total 205 data were collected and used for analysis of shippers companies for hypothesis testing, and analyzed using SPSS 21.0 and AMOS 21.0 statistical programs. The results of the study are summarized as follows. First, it was found that the accuracy, timeliness, and usefulness of the 3PL logistics information system all had a significant positive (+) effect on the performance of the shipper's supply chain. Second, it was found that the accuracy, timeliness, and usefulness of the 3PL logistics information system all had a significant positive (+) effect on 3PL corporate performance. Third, it was found that the performance of the supply chain of the shipper company had a significant positive (+) effect on the performance of the 3PL company. Finally, it was found that long-term relationship orientation had a moderating effect on the relationship between the performance of the shipper company's supply chain and the performance of the 3PL company. The purpose of this study is to provide academic and practical implications for securing competitive advantage through the logistics information system of 3PL logistics companies.

• Journal of Venture Innovation
• /
• v.3 no.2
• /
• pp.1-21
• /
• 2020

Recently, the emergence of new technologies caused by the Fourth Industrial Revolution caused a great change not only in the overall society but also in the retail industry. In the retail industry, unmanned stores based on new technologies have emerged, changing the consumption behavior of consumers. In particular, the global pandemic caused by COVID-19, which appeared in December 2019, raised social risks, and as a result of this, the beginning of the non-face-to-face era, interest in unmanned stores is increasing. In this study, the effects of benefits factors (perceived usefulness, perceived economics, perceived enjoyment, relative advantages) and sacrifice factors (perceived risk, technicality) perceived by unmanned store users on continuous use intention through perceived value. In addition, it is a study to test through empirical analysis what role the social risk from COVID-19 plays in the process of consumption through unmanned stores. The purpose of this study is to provide strategic implications for the activation of unmanned stores in the non-face-to-face era. In this study, a total of 293 copies of data were collected for users of unmanned stores for hypothesis testing. In addition, the collected data was analyzed using SPSS 21.0 and AMOS 21.0 statistical programs. The results of the study are summarized as follows. First, it was found that the perceived benefits (perceived usefulness, perceived economics, perceived playfulness, and relative advantages) of unmanned stores all had a significant positive effect on perceived value. Second, it was found that all perceived sacrifices (perceived risk, technicality) of unmanned stores had a significant negative effect on perceived value. Third, it was found that the perceived value of unmanned stores had a significant positive effect on the intention to continue use. Finally, the social risk from COVID-19 has been shown to play a moderating role when the perceived sacrifice of unmanned stores affects the perceived value.

• Journal of Venture Innovation
• /
• v.5 no.3
• /
• pp.81-98
• /
• 2022

In the recent COVID-19 pandemic, urban agriculture is attracting attention as a healing concept. In 2020, 1,848,000 people participated in urban agriculture activities in Korea. Therefore, this study was conducted to empirically analyze the factors affecting the intention to participate in urban agriculture, which is rapidly increasing. The theoretical basis of this study is the experiential economy theory of Pine II and Gilmore and the experiential theory of Schmitt. As independent variables, a total of five variables were set as the four elements of Pine II and Gilmore's experiential economy theory, namely, educational, entertainment, escapist, and aesthetic experiences, and relational experience reclassified using Schmitt's theory. Interest was set as a mediating variable between these independent variables and the dependent variable, intention to participate in urban agriculture. For empirical analysis, data were collected through a survey. Based on the significant 314 samples of the collected data, the hypothesis was tested through statistical analysis. First, as a result of testing the influence relationship between the independent and dependent variables, educational, entertainment, and escapist experiences had a significant positive (+) effect on the intention to participate in urban agriculture. The impact of the influence was in the order of entertainment experience, escapist experience, and educational experience. There was no significant influence relationship between aesthetic experience, relational experience and intention to participate in urban agriculture. On the other hand, as a result of this study, interest introduced as a mediating variable was found to play a mediating role between entertainment, escapist, aesthetic experiences and intention to participate in urban agriculture. The mediating effect of interest was not tested between educational, relational experiences and intention to participate in urban agriculture. This study approached urban agriculture participation from the concept of healing and analyzes the factors affecting participation in urban agriculture activities empirically based on a theoretical framework by combining and analyzing the representative Pine II and Gilmore theories and Schmitt theories. It had academic significance. In addition, it was meaningful to suggest that the healing concept approach is directional in relation to urban agriculture by revealing that entertainment and escapist experiences are important influencing variables in decision-making to participate in urban agriculture in practice.