• Korean Journal of Optics and Photonics
• /
• v.21 no.6
• /
• pp.241-246
• /
• 2010

In this paper, we propose an electric field enhanced postexposure baking (EFE-PEB) method to obtain deep and high aspect ratio pattern profile in near-field recording. To describe the photoacid distribution under an external electric field during the PEB, we derived the governing equations based on Fick's second law of diffusion. From the results of the numerical calculations, it is found that the vertical movement of photoacid increases while the lateral movement is stationary as electric field varies from 0 to $8.0{\times}10^6\;V/m$. Also, it is proven that the profile of near-field recording is improved by using the EFE-PEB method with increased depth, higher aspect ratio and larger sidewall angle.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.5
• /
• pp.757-767
• /
• 2016

The power spectral density (PSD) for the road surface roughness on the bridges of minor roads in Wonju city and Hoengseong-gun, Gangwon-do is presented. To obtain the PSD, the road surface roughness on 18 different bridges with various superstructure type and span is measured by GPS at every 10 to 30cm interval. Assuming the PSD as the stationary normal probability process with zero mean value, the PSD of measured road surface roughness is obtained by applying the Maximum Entropy Method (MEM). A simple formula in evaluating the PSD of RC slab bridge, Rahmen bridge and PSC I-girder bridge which is applicable to the dynamic response analysis of bridges considering the road surface roughness is proposed. Using the calculated PSD curves, the road surface conditions on the 18 bridges are evaluated. The statistical relationship between the PSD and the IRI is presented by applying linear regression and correlation analysis.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.34 no.3
• /
• pp.287-293
• /
• 1998

Floating debris was recorded from a training ship, #1 Kwarnksan, of Pukyong National University with about 10 knots speed during March, May and July of 1997. The area sampled is the Southeastern Coast of Korea, divided into 40 unit segments on survey routes. Debris fabrication materials were categorized using the following ; man-made or natural wood items, paper, cardboard, nylon rope, netting, styrofoam and plastics, floating metal and glass containers. All identified items within a $100\;{\pm}\;2\;m$ wide band were recorded but ignored if beyond this boundary.The results of distribution and composition of floating debris in the area as follows:1. The quantities of debris during the duration of survey were distributed from 2~605 items per km2. The most obvious trend is the widespread distribution of all debris. 2. The highest densities of all debris were discovered in the coastal waters of Seoimal lighthouse, the southeastern part of Koje island, next near Nakdong estuaries. Especially styrofoam & plastics were observed in 77.4~87.2% of sampled area, next is wood items, 9.1~ 13.5%. And nylon netting & rope, 3.6%, was the third item of pollutant. Others are very small. 3. Compared with the East Coat of Korea, the quantities of all debus in theSoutheastern Sea are 6 times as large as the East Coast. The survey provides a basis for more detailed survey work in the South Sea. Further surveys are being investigated, and from this it is hoped that a much wider coverage can be achieved, perhaps on all sites of the Coast of Korea and contributed to the removal method, finding of sources, stationary area of debris.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.12
• /
• pp.1257-1264
• /
• 2011

This paper presents 3D simulation by STAR-CCM+ for lean premixed combustion in a stationary gas turbine combustor with separate pilot and main nozzles. The constant for the source term in the flame area density transport equation was modified to account for a low global equivalence ratio and validated against measurement data. A Partially-premixed Coherent Flame Model(PCFM) involves propagation of a laminar premixed flame with the predicted flame surface density and equilibrium assumption in the burned gas with spatial inhomogeneity. The conditions for cooling by radiation and convection are considered for accurate determination of the heat flux on the wall. A parametric study is of the pilot-fuel-to-total-fuel-ratio is carried out. A chemical reactor network (CRN) was constructed on the basis of the 3D simulation results and compared against measurements of NOx.

• Journal of Fisheries and Marine Sciences Education
• /
• v.9 no.1
• /
• pp.31-39
• /
• 1997

Floating debris was recorded from a training ship, #1 Kwanaksan, of Pukyong National University with about 10 knots speed during August 19~26, 1996. The area sampled is the East Coast of Korea, divided into 33 unit segments on survey routes. Debris fabrication materials were categorized using the following; man-made or natural wood items, paper, cardboard, nylon rope, netting, styrofoam and plastics, floating metal and glass containers. All identified items within a $100{\pm}2m$ wide band were recorded but ignored if beyond this boundary. The results of distribution and composition of floating debris in the area are as follows: 1. The quantities of debris during the summer were distributed from 1.8~52 items per $km^2$. The most obvious trend is the widespread distribution of all debris. 2. The highest densities of all debris were discovered in the vicinity of Pusan and ills an area. Especially styrofoam & plastics were observed in 81% of sampled area, next is wood items, 9.1%. Nylon netting & rope was the least widespread pollutant. 3. The relationship between distribution of debris and surface currents of the area was not apparently revealed through this survey. Further surveys are being instigated, and from this it is hoped that a much wider coverage can be achived, perhaps on all sites of Southern and Western sea of Korea and contributed to the finding of sources,stationary area of debris.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.5233-5241
• /
• 2014

This study analyzed the system level performance of the Mobile WiMAX-based TICN, and the effects of the use of BS-OTM in terms of the throughput of individual users as well as the overall system, assuming that other stationary BSs are distributed randomly. When BS-OTM is used, the CINRs decrease due to the additional interference from the BS-OTM from the perspective of SSs that are served by the same BS as when OTM BS is not used. On the other hand, from the perspective of SSs that had low CINRs, the CINRs increase significantly due to the new service from BS-OTM. Considering both effects, the cell throughput can be increased using BS-OTM. The CINR distribution and throughput of the overall system, changing the carrier frequency, position and velocity of the BS-OTM were also evaluated.

• Korean Chemical Engineering Research
• /
• v.43 no.3
• /
• pp.360-365
• /
• 2005

SMB (simulated moving bed) is a continuous chromatographic process by shifting periodically port position. Binary of mixture, Blue dextran and Orange G, was separated by SMB. These components have unique color individually, that is, Blue dextran is blue and Orange G is orange. It is easy to understand SMB process by observing the shift of color changes in SMB. These components was not adsorbed to stationary phase and isolated by difference of size exclusion factor. Mass transfer coefficient was determined by single pulse test under several flow rate conditions. Operation condition was obtained by standing wave theory and optimized for high purities in extract and raffinate streams. Experiment was performed in open loop 4 zone (2-2-2-2) SMB. There are several advantages in open loop SMB, where extract is product for high purity. It is also easy to control flow rate and monitor experimental state during operation. Experimental, extract and raffinate history is well fitted with simulation results, however, column concentration profile is a little different from simulation results. Purities were 99.5％ for extract and 98.9％ for raffinate and extract and raffinate yields were obtained as 98.9％ and 99.4％ respectively.

• Journal of the Korean Society of Groundwater Environment
• /
• v.7 no.3
• /
• pp.125-132
• /
• 2000

pH, EC and TDS are basic components in the investigation of groundwater quality, and are very important to the preliminary assessment of groundwater quality. These three chemical components investigated at the Youngsan and Sumjin river basins in 1998 suggest that the groundwater quality is generally good in these basins. Linear regression analysis shows that TDS versus EC has an linear correlation, but EC versus pH, and TDS versus pH have nearly no correlation. The relation of TDS and EC is 1.0 mg/1=1.52 $mu\textrm{S}$/cm, and it is the quality of natural water. In geostatistical analysis. three kinds of data are stationary random functions and they have exponential variograms. According to the isopleth maps of the groundwater quality, the groundwater quality of the Youngsan river basin is more contaminated than that of the Sumjin river basin. The isopleth maps of TDS and EC show very similar patterns because of the strong correlation between TDS and EC. The minimum and maximum values of the groundwater quality data are not reflected on the isopleth maps because kriging produces smooth distributions with minimum estimation variances.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.703-703
• /
• 2012

대규모 하천이 많은 미국과 유럽 등은 정상 침투해석을 실시하여 제방을 설계하지만, 우리나라의 경우 상류 지역은 하천경사가 급하여 홍수지속시간이 짧고, 하류 지역은 하천경사가 완만하여 홍수지속시간이 길어 비정상 침투해석을 통해 제방을 설계한다. 설계 홍수파형을 정상상태로 해석하면 대상지점의 홍수파형이 갖는 홍수지속시간과 감수부 경사가 고려되지 않아, 상류 지역은 과대한 외력이 설정될 수 있으며, 하류 지역은 과소한 외력조건으로 과소 설계될 우려가 있어 시간에 따른 수위 변화를 고려한 비정상 침투해석이 필요하다. 비정상 침투해석을 위해서는 제방에 대한 외력조건으로 적용될 하천의 홍수파형이 필요하지만 국내에서는 홍수위와 지속시간 등 홍수파형의 시간분포에 대한 명확한 기준이 없어서 실무에서는 설계하고자하는 대상지점의 계획홍수량에 사용된 홍수파형의 계획홍수위와 홍수지속시간을 이용하여 설계홍수파형을 결정하여 사용하고 있다. 본 연구는 제방에 대한 부정류 침투해석을 위해 사용되는 설계홍수파형을 결정하는 방법을 소개하고, 우리나라 5대강 유역에 위치한 수위관측소 중 수위자료가 충분히 구축된 지점을 대상으로 과거 홍수사상 기간의 수위수문곡선과 계획홍수량 산정에 사용되었던 설계수문곡선을 이용하여 홍수파형을 결정하였다. 제방의 비정상 침투해석을 위한 설계홍수파형은 홍수지속시간과 감수부 경사로 결정된다. 본 연구에서 산정한 설계홍수파의 홍수지속시간은 대부분의 지점에서 계획홍수파의 지속시간보다 크게 산정되었으며, 실무에서 사용되는 계획홍수파의 지속시간이 과소산정되었음을 알 수 있었다. 홍수파의 감수부 경사의 경우, 본 연구에서 산정한 설계홍수파의 감수부 경사가 계획홍수파의 감수부 경사보다 비교적 완만한 것으로 나타났으며, 이는 지속시간이 긴 실제 홍수사상이 반영된 결과로 판단된다. 현재 비정상 침투해석을 위해 외력으로 설정되는 홍수파형은 계획홍수량 산정시 이용한 계획 홍수파형만을 사용한다. 이 경우 과거 홍수사상의 홍수지속시간이 반영되지 않아 안정성 측면에서 계획홍수파형과 과거 홍수를 모두 고려한 본 연구의 방법이 더 타당할 것으로 판단된다.

• Journal of Biomedical Engineering Research
• /
• v.19 no.2
• /
• pp.143-152
• /
• 1998

In this paper, we present the performances of a Doppler system using single channel RF(Radio Frequency) sampling. This technique consists of undersampling the ultrasonic blood backscattered RF signal on a single channel. Conventional undersampling method in Doppler imaging system have to use a minimum of two identical parallel demodulation channels to reconstruct the multigate analytic Doppler signal. However, this system suffers from hardware complexity and problem of unbalance(gain and phase) between the channels. In order to reduce these problems, we have realized a multigate pulsed Doppler system using undersampling on a single channel, It requires sampling frequency at $4f_o$(where $f_o$ is the center frequency of the transducer) and 12bits A/D converter. The proposed " single-Channel RF Sampling" method aims to decrease the required sampling frequency proportionally to $4f_o$/(2k+1). To show the influence of the factor k on the measurements, we have compared the velocity profiles obtained in vitro and in vivo for different intersequence delays time (k=0 to 10). We have used a 4MHz center frequency transducer and a Phantom Doppler system with a laminar stationary flow. The axial and volumetric velocity profiles in the vessel have been computed according to factor k and have been compared. The influence of the angle between the ultrasonic beam and the flow axis direction, and the fluid viscosity on the velocity profiles obtained for different values of k factor is presented. For experiment in vivo on the carotid, we have used a data acquisition system with a sampling frequency of 20MHz and a dynamic range of 12bits. We have compared the axial velocity profiles in systole and diastole phase obtained for single channel RF sampling factor.ng factor.