• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.10a
• /
• pp.46-47
• /
• 2013

We prepared biostimulant balls using sea sediment mixed with biostimulants viz acetate, nitrate and sulfate. The Biostimulant balls were coated with Cellulose Acetate (CA) and Polysulfone (PS) to control the release of the biostimulants. SEM images showed that CA coating was porous and irregular in the inside and very uniform and tight like beehive while PS coating was the same in the inside and outside and not porous. Biostimulants release was found to be high in sea water compared to distilled water. The release of nitrate was higher compared to sulfate. In turbulent environment the release of bionutrients was 50% higher than static environment.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.7
• /
• pp.620-624
• /
• 2016

In this paper we designed a current mode logic frequency divider to transmit a baseband amplitude modulated signal. From simulation result, we studied input and output waveforms according to the variation of input bias voltage. For the purpose of the verification of the study, we designed a current mode logic frequency divider at 1,400 MHz. The designed frequency divider operates between 100 MHz and 3,000 MHz, for -33 dBm input power. The circuit draws $I_{total}=30mA$ from $V_{DD}=3V$ supply, and the simulation result shows that an amplitude modulated signal at 1,400 MHz with the modulation index of 0.5 was successfully downconverted to 700 MHz.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.2
• /
• pp.217-224
• /
• 2014

We have developed the novel device that can extract energy from ocean waves utilizing the heaving motion of a floating mass. The major components of the energy converter are: a floater, a counterweight, a cable, a driving pulley, two idler pulleys, a ratchet, and a generator. The device generates power through the tension force in the cable and the weight difference between the floater and the counterweight. When the system is at static free condition, the tension in the cable is equal to the weight of the counterweight which is minimum. Therefore it is desirable to keep the counterweight lighter than the floater. However, experiments show that during the rise of the water level, the torque generated by weight of the counterweight is insufficient to rotate the driving pulley which causes the cable on the floater side to slack. The proposed application of the tension pulley rectifies these problems by preventing the cable from becoming slack when the water level rises. In this paper, the dynamics model is modified to incorporate the dynamics of the tension pulley. This has been achieved by first writing the dynamical equations for the tension pulley and the energy converter separately and combining them later. This paper investigates numerically the effect of the tension pulley on various physical quantities such as the cable tension, the floater displacement, and the floater velocity. Results obtained indicate that this application is successful in suppressing large fluctuations of the cable tension.

• Journal of the Korean Society of Costume
• /
• v.37
• /
• pp.231-252
• /
• 1998

Since the costume directly express human mental and emotional status, colors of costume can be valuable data to grasp the spirit of the times. Black is noticeably used in modern fashion and the study for black costume is very useful to understand modern fashion. There-fore the study mainly approaches the black costume, finding its background of appearance and symbolism, reviews the symbolism and formality of black expressed in the field of paint-ing and design beyond the fashion, and compar-es to fashion. The study result of the thesis is as follows ; First, black as a color is a one to light other neighboring colors, while it is a static, con-tractible and outstandigly attractived color. Second, black color traditionally symbolizes death, earth, air, North and inferior level and in the painting, it symbolized death, despair, fantastic world and the expression of pent-up self, while cities have been symbolized in the black printing in modern times. In the design, black has appeared with the industrial society, which symbolizes functionality and modernity. Third, black in the fashion design was symbolized death, sternness simplicity, modernity, sex, resistance and so on. Death became conspicious by a religious factor since the old times, sternness was influenced by Spanish fashion in the 16th century, simplicity by Dutch fashion in the 17th century and modernity by Baudelaire dandyism and Chanel little black dress, while sex and resistance were urged to the modern times by teenage inferior culture and stickiness to sex. Fourth, the formative features of black costume prefer simplicity, tightness and bareness in form, and in material, usually used glancing materials changed by the effect of light, lace, see-through fabric and matte one with depth. As a result, the black color is summarized to symbol death, expression of self and modernity. It is not a color of emotion but of mentality and artificial one against nature. Black color in fashion gets a strong power to express self in the symbolic aspect and draws a higher attention on human body than the fashion itself. By these features, black costume will be continuously prefered in spite of changes of the fashion.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.2
• /
• pp.103-112
• /
• 1990

This study examines the characteristics of soil behavior which includes many uncertainties in seismic design, evaluates the dynamic soil properties and studies the soil-structure interaction to generalize the applicability and economy of the available sites. An example analysis is performed for soil-structure system response assuming a containment structure built on site which includes soil layers using both elastic halfspace analysis and FEM analysis against the seismic loads from the actual design. This exercise is performed as a part of the safety analysis and economic assessment of the nuclear power plant built on soils. It includes the preparation of computer program capable of incorporating large nonlinearity in the analysis, resonable evaluation procedures to determine input soil data. Nonlinear FEM analysis of Seed and Idriss model is found suitable for the accurate analysis of dynamic response of soils. Linear FEM analysis using dynamic soil properties at strain level obtained by one-dimensional seismic response, and elastic half-space analysis using dynamic soil properties at strain level under static loads are recommended to evaluate the dynamic soil properties.

• Journal of Mechanical Science and Technology
• /
• v.18 no.2
• /
• pp.185-192
• /
• 2004

The aeroacoustic characteristics of a centrifugal fan for a vacuum cleaner and its noise reduction method are studied in this paper. The major noise source of a vacuum cleaner is the centrifugal fan. The impeller of the fan rotates at over 30000 rpm, and generates very high-level noise. It was revealed that the dominant noise source is the aerodynamic interaction between the rotating impeller and stationary diffuser. The directivity of acoustic pressure showed that most of the noise propagates backward direction of the fan-motor assembly. In order to reduce the high tonal sound generated from the aerodynamic interaction, unevenly pitched impeller and diffuser, and tapered impeller designs were proposed and experiments were performed. Uneven pitch design of the impeller changes the sound quality while the overall sound power level (SPL) and the performance remains similar. The effect of the tapered design of impeller was evaluated. The trailing edge of the tapered fan is inclined. This reduces the flow interaction between the rotating impeller and the stationary diffuser because of some phase shifts. The static efficiency of the new impeller design is slightly lower than the previous design. However, the overall SPL is reduced by about 4 dB(A). The SPL of the fundamental blade passing frequency (BPF) is reduced by about 6 dB (A) and the 2$\^$nd/ BPF is reduced about 20 dB (A). The vacuum cleaner with the tapered impeller design produces lower noise level than the previous one, and the strong tonal sound was dramatically reduced.

• Structural Engineering and Mechanics
• /
• v.27 no.6
• /
• pp.713-739
• /
• 2007

Nowadays computers can perform symbolic computations in addition to mere number crunching operations for which they were originally designed. Symbolic computation opens up exciting possibilities in Structural Mechanics and engineering. Classical areas have been increasingly neglected due to the advent of computers as well as general purpose finite element software. But now, classical analysis has reemerged as an attractive computer option due to the capabilities of symbolic computation. The repetitive cycles of simultaneous - equation sets required by the finite element technique can be eliminated by solving a single set in symbolic form, thus generating a truly closed-form solution. This consequently saves in data preparation, storage and execution time. The power of Symbolic computation is demonstrated by six examples by applying symbolic computation 1) to solve coupled shear wall 2) to generate beam element matrices 3) to find the natural frequency of a shear frame using transfer matrix method 4) to find the stresses of a plate subjected to in-plane loading using Levy's approach 5) to draw the influence surface for deflection of an isotropic plate simply supported on all sides 6) to get dynamic equilibrium equations from Lagrange equation. This paper also presents yet another computationally efficient and accurate numerical method which is based on the concept of derivative of a function expressed as a weighted linear sum of the function values at all the mesh points. Again this method is applied to solve the problems of 1) coupled shear wall 2) lateral buckling of thin-walled beams due to moment gradient 3) buckling of a column and 4) static and buckling analysis of circular plates of uniform or non-uniform thickness. The numerical results obtained are compared with those available in existing literature in order to verify their accuracy.

• Advances in nano research
• /
• v.9 no.4
• /
• pp.263-276
• /
• 2020

In this article, the acoustic responses of free vibrated natural fibre-reinforced polymer nanocomposite structure have been investigated first time with the help of commercial package (ANSYS) using the multiphysical modelling approach. The sound relevant data of the polymeric structure is obtained by varying weight fractions of the natural nanofibre within the composite. Firstly, the structural frequencies are obtained through a simulation model prepared in ANSYS and solved through the static structural analysis module. Further, the corresponding sound data within a certain range of frequencies are evaluated by modelling the medium through the boundary element steps with adequate coupling between structure and fluid via LMS Virtual Lab. The simulation model validity has been established by comparing the frequency and sound responses with published results. In addition, sets of experimentation are carried out for the eigenvalue and the sound pressure level for different weight fractions of natural fibre and compared with own simulation data. The experimental frequencies are obtained using own impact type vibration analyzer and recorded through LABVIEW support software. Similarly, the noise data due to the harmonically excited vibrating plate are recorded through the available Array microphone (40 PH and serial no: 190569). The numerical results and subsequent experimental comparison are indicating the comprehensiveness of the presently derived simulation model. Finally, the effects of structural design parameters (thickness ratio, aspect ratio and boundary conditions) on the acoustic behaviour of the natural-fibre reinforced nanocomposite are computed using the present multiphysical model and highlighted the inferences.

• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.419-424
• /
• 2012

This paper discusses the state-of-the-art techniques in real-time state estimation for the Smart Microgrids. The most popular method used in traditional power system state estimation is a Weighted Least Square(WLS) algorithm which is based on Maximum Likelihood(ML) estimation under the assumption of static system state being a set of deterministic variables. In this paper, we present a survey of dynamic state estimation techniques for Smart Microgrids based on Belief Propagation (BP) when the system state is a set of stochastic variables. The measurements are often too sparse to fulfill the system observability in the distribution network of microgrids. The BP algorithm calculates posterior distributions of the state variables for real-time sparse measurements. Smart Microgrids are modeled as a factor graph suitable for characterizing the linear correlations among the state variables. The state estimator performs the BP algorithm on the factor graph based the stochastic model. The factor graph model can integrate new models for solar and wind correlation. It provides the Smart Microgrids with a way of integrating the distributed renewable energy generation. Our study on Smart Microgrid state estimation can be extended to the estimation of unbalanced three phase distribution systems as well as the optimal placement of smart meters.

• Journal of the Korean Society of Physical Medicine
• /
• v.6 no.1
• /
• pp.59-69
• /
• 2011

Purpose : The purposes of this study were to find correlations among Fugl-Meyer Assessment Scale, walking velocity, walking asymmetry and balance ability. Methods : The study sample consisted of 50 stroke patients referred to the Department of Rehabilitation Medicine in the Sanggye Paik, Ilsan Paik, Seoul Paik, and Dobong Hospital. All subjects were ambulatory with or without an assistive device. All participants were assessed on Fugl-Meyer Assessment scale and walking velocity, walking asymmetry. The data were analyzed using independent t-test, ANOVA, and multiple regression. Results : The results revealed that upper extremity coordination, balance and pain items of Fugl-Meyer Assessment scale were significantly correlated with walking velocity and upper extremity and upper extremity motor and balance items of Fugl-Meyer Assessment scale were significantly correlated with walking asymmetry. Fugl-Meyer Assessment scale was not significantly correlated with Static Balance Index, Dynamic Balance Index and Weight Distribution Asymmetry Index. Their power of explanation regarding comfortable walking velocity and comfortable walking asymmetry were 60.3%, 42.5% respectively. Conclusion : These results showed that Fugl-Meyer Assessment scale is significantly correlated with walking velocity, asymmetry and not significantly correlated with balance ability. Therefore Fugl-Meyer Assessment scale is an appropriate assessment tool to predict walking ability of patients with stroke. Futher study about walking velocity and asymmetry by change of Fugl-Meyer Assessment scale is needed using a longitudinal study design.