• 시스템엔지니어링학술지
• /
• 제1권2호
• /
• pp.43-48
• /
• 2005

This paper describes the results of applying States and Modes Analysis, one of the requirements analysis techniques, to the development requirements of flight control software for Smart UAV. State/mode table enabled us to investigate various operation and design concepts, and as a result essential requirements for flight control software were established without omitting necessary requirements. Through the use of scenario-specific state transition diagrams, dynamic behaviours and control/response interfaces between each state and mode could been clearly identified, which made it possible to establish requirements related to dynamic behaviours of states and modes which are essential to the design of flight control software.

• Korean Journal of Hydrosciences
• /
• 제6권
• /
• pp.39-49
• /
• 1995

The surface hydrology of large land areas is susceptible to several preferred stable states with transitions between stable states induced by stochastic fluctuation. This comes about due to the close couping of land surface and atmospheric interaction. An interesting and important issue is the duration of residence in each mode. Mean transition times between the stable modes are analyzed for different model parameters or climatic types. In an example situation of this differential equation exhibits a bimodal probability distribution of soil moisture states. Uncertainty analysis regarding the model parameters is performed using a Monte-Carlo simulation method. The method developed in this research may reveal some important characteristics of soil moisture or precipitation over a large area, in particular, those relating to abrupt change in soil moisture or preciptation having extremely variable duration.

• 시스템엔지니어링워크숍
• /
• 통권4호
• /
• pp.101-104
• /
• 2004

• Journal of Communications and Networks
• /
• 제11권4호
• /
• pp.406-415
• /
• 2009

In this work, we consider performance modeling of a wireless sensor network with a time division multiple access (TDMA) media access protocol with slot reuse. It is assumed that all the nodes are peers of each other and they have two modes of operation, active and sleep modes. We model the sensor network as a Jackson network with unreliable nodes with on and off states. Active and sleep modes of sensor nodes are modeled with on and off states of unreliable nodes. We determine the joint distribution of the sensor node queue lengths in the network. From this result, we derive the probability distribution of the number of active nodes and blocking probability of node activation. Then, we present the mean packet delay, average sleep period of a node and the network throughput. We present numerical results as well as simulation results to verify the analysis. Finally, we discuss how the derived results may be used in the design of sensor networks.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1634-1637
• /
• 2002

We examine the oscillatory modes generated by the Hopf bifurcations of non-origin equilibrium points in the four-coupled oscillator system. The Hopf bifurcations of the equilibrium points and the generated oscillatory modes are classified. By numerical bifurcation analysis we observe various interesting synchronized states caused by symmetry-breaking bifurcations.

• 물과 미래
• /
• 제27권2호
• /
• pp.129-137
• /
• 1994

넓은 지역의 지표면 수문은 추계학적 변동에 의해 야기되는 안정된 상태간의 천이와 함께 몇 개의 선호되는 안정된 상태의 영향을 받기가 쉬운데 그 이유는 지표면과 대기 상호관계의 밀접한 조합과도 관계가 있다. 흥미있고 중요한 과제가 각 안정상태에서의 체류기간 즉 가뭄기나 홍수기의 지속기간이라 할 수 있는데 안정상태의 평균 천이시간이 다른 모델 변수나 기후 형태에 대하여 분석하였다. 본 연구에서 보여준 기후 상황에 대해 미분 방정식의 해는 함수비 상태가 두 개의 최빈수를 갖는 확률 분포를 보여 주고 있다. 모델 변수와 관련하여 불확실성 분석을 Monte-Carlo 모의 방법을 사용하여 수행하였다. 본 연구에서 수행된 방법은 넓은 지역에 대한 토양 수분이나 강우 특히 매우 다양한 지속 시간을 보이는 토양 수분이나 강우에 있어서의 급격한 변화와 관련된 중요한 특성을 보여준다고 하겠다.

• 한국수자원학회논문집
• /
• 제33권3호
• /
• pp.375-382
• /
• 2000

대유역의 지표면 수문현상은 추계학적 변동에 의해 야기되는 안정된 상태의 변이와 함께 몇 개의 발생빈도가 높은 안정된 상태의 영향을 받기가 쉬운데 그 이유는 지표면과 대기 상호관계의 밀접한 조합과도 관계가 있다. 따라서 각 안정상태에서의 체류기간 즉, 가뭄기나 홍수기의 지속기간이 중요한 연구 과제라 할 수 있으며 본 연구에서는 한강유역에 대하여 안정상태의 평균 변이기간을 분석하였다. 비선형 물수지모형을 한강 유역에 대하여 과거의 자료를 바탕으로 검정하였고 모형을 통한 물리과정의 추계학적 표현과 산정된 모형변수들로부터 안정상태사이의 평균 변이기간이 계산되었다. 본 연구는 안정상태 사이의 변이기간 혹은 거주기간, 즉 시스템이 주어진 안정상태에 머무는 기간(가뭄이나 홍수상태의 지속기간)의 예측과 밀접한 관계가 있다.

• 대한전기학회논문지
• /
• 제32권10호
• /
• pp.335-340
• /
• 1983

The analysis of static power converter circuit using state-space method is presented. Semiconductors are modeled in two-state resistors depending on their ON or OFF states. Then the modes of circuit are determined according to the conducting states of semiconductors and different describing matrices are given automatically for each mode. Newton-Raphson algorithm is used as an iterative method for obtaining steady-state solution and an adjoint network is introduced for the efficient and accurate evaluation of the Jacobi matrix in the algorithm. Using the porogram exploited from the above algorithm, it is shown through examples that the results are in good agreement with the analytic solutions and computation time is considerably reduced for obtaining the steady-state solutions.

• Steel and Composite Structures
• /
• 제8권1호
• /
• pp.53-83
• /
• 2008

A rational and efficient seismic design methodology for irregular space steel frames using advanced methods of analysis in the framework of Eurocodes 8 and 3 is presented. This design methodology employs an advanced static or dynamic finite element method of analysis that takes into account geometrical and material non-linearities and member and frame imperfections. The inelastic static analysis (pushover) is employed with multimodal load along the height of the building combining the first few modes. The inelastic dynamic method in the time domain is employed with accelerograms taken from real earthquakes scaled so as to be compatible with the elastic design spectrum of Eurocode 8. The design procedure starts with assumed member sections, continues with the checking of the damage and ultimate limit states requirements, the serviceability requirements and ends with the adjustment of member sizes. Thus it can sufficiently capture the limit states of displacements, rotations, strength, stability and damage of the structure and its individual members so that separate member capacity checks through the interaction equations of Eurocode 3 or the usage of the conservative and crude q-factor suggested in Eurocode 8 are not required. Two numerical examples dealing with the seismic design of irregular space steel moment resisting frames are presented to illustrate the proposed method and demonstrate its advantages. The first considers a seven storey geometrically regular frame with in-plan eccentricities, while the second a six storey frame with a setback.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.81-84
• /
• 2001

In the power system of a satellite, solar array and a battery have directly impact on the life time of the satellite, and their stable operation is decided by whether their states are in the steady state operation or not. In this study, solar array capacity and battery characteristics of proposed communication satellite are designed and simulation is conducted according to the operation mode. Each operation mode is classified as the normal and worst case modes, respectively. The normal mode is analyzed under daylight and the eclipse with the EHT burn, and the worst case modes which have solar cell circuit failure, and battery cell failure are analyzed too.