• 제목/요약/키워드: Statement Analysis

검색결과 599건 처리시간 0.025초

담임교사가 인식한 학교상담자와의 자문 관계에서의 장애요인 탐색 (Teacher Perception about Barriers to Consultation with School Counselors)

  • 김지연;박알뜨리
    • 한국심리학회지:학교
    • /
    • 제16권1호
    • /
    • pp.39-63
    • /
    • 2019
  • 본 연구는 담임교사가 인식한 학교상담자와의 자문 관계에서의 장애요인을 탐색적으로 파악하고자 하는 목적으로 이루어졌다. 이를 위해 서울, 경기, 인천, 충청, 대구 등에 근무하는 담임교사 16명을 대상으로 자료를 수집하여 개념도 연구방법을 통해 분석하였다. 1차로 수집된 일대일 면담 자료에 대한 질적분석을 통해 담임교사의 관점에서 학교상담자에게 자문을 받을 때의 장애요인을 설명하는 진술문을 도출하였다. 2차 자료 수집 과정에서는 일대일 면담 또는 우편의 방식으로 진술문에 대한 유사성 분류 및 중요도 평정이 이루어졌다. 2차로 수집된 자료에 대해 다차원분석과 군집분석을 실시하여 개념도를 작성하였다. 연구 결과는 다음과 같다. 담임교사가 인식한 학교상담자와의 자문 관계에서의 장애요인은 최종 51개의 진술문으로 정리되었다. 진술문에 대한 차원분석은 2개의 차원으로 '학교상담 특성 - 학교상담자 특성' 차원과 '심리적 장애 - 물리적 장애' 차원으로 명명되었다. 51개의 진술문에 대해 군집분석을 실시한 결과, 5개의 군집으로 분석되었다. 담임교사가 인식할 때 학교상담자와의 자문 관계에서의 장애요인 군집은 '담임교사로서의 책임감이 상담자와의 소통을 방해함', '학교상담자에게 받는 자문의 필요성에 대한 인식 부족', '학교상담자에 대한 신뢰 부족', '학교상담자 역할에 대한 인식 및 관련 경험 부족', 그리고 '학교상담 환경으로 인한 학교상담자의 업무 과다'로 정리되었다. 5개의 군집에서 중요도 평정 결과가 가장 높게 나타난 군집은 '학교상담자에 대한 신뢰 부족'으로 나타났다.

LCC 기법을 통한 가축분뇨처리시설의 경제성 분석 (Economic Analysis of the Livestock Manure Treatment System Using Life-Cycle Cost Technique)

  • 김재환;조승희;곽정훈;최동윤;정광화;정의수;정만순;박성균
    • 한국축산시설환경학회지
    • /
    • 제17권sup호
    • /
    • pp.61-68
    • /
    • 2011
  • 본 연구는 가축분뇨 처리시설의 평가 및 최적 선택의 의사결정에 있어서, 시설물은 내구성이 있는 자산이므로 내용연수 전 기간에 걸친 비용측면에서의 경제성이 고려되어야 하는 바, 이를 위하여 LCC (Life Cycle Cost) 기법의 적용 가능성을 검토하고자 수행하였다. 경제성의 비교 분석을 위해 양돈 분뇨 1일 100톤 처리규모의 공동자원화시설 설치 공법들 중 4개 공법에 대한 시설투자 및 연간 운영비를 조사하였는데, 초기 투자비는 2,699~3,202 백만원 수준으로 T 공법이 가장 높았고 E 공법이 가장 낮았다. 연간 운영비에 있어서는 378~498 백만원 수준으로 T 공법, J 공법, E 공법, B 공법 순으로 유리한 것으로 조사되었다. LCC 분석을 위해 한국은행 및 통계청의 10년간 ('00~'09) 자료를 이용하여 이자율 (4.7%), 물가상승율 (3.13%), 실질 할인율 (1.52%)를 기준하고, 현가계수 산정을 위해 내용연수를 토목 건축 (30년), 기계 (10년), 전기계장 (15년) 으로 기준하였다. 이를 바탕으로 한 분석 결과, 톤당 운영비로 보면 17,570~18,998원/톤 수준으로서 E공법이 17,570원/톤으로 가장 낮은 반면, B 공법이 20,661원/톤으로 가장 높아 상대적으로 가장 비경제적이었다. 특히 초기투자비가 높더라도 연간 운영비가 낮은 T 공법이 초기투자비는 T 공법보다 낮으나 연간 운영비가 상대적으로 높은 B 공법에 비해 LCC가 낮게 평가되었다. 따라서 가축분뇨 처리시설의 경제적 측면에서의 공법 선택에 있어서는 초기시설투자비 또는 연간 운영비 중 어느 한쪽만 평가하여 결정하기 보다는 LCC 분석을 적용하여 평가하는 것이 합리적임을 알 수 있다. 또한 경제성 분석에 있어서, 불확실성에 따른 LCC 분석 결과의 변화를 파악하기 위해 '00~'09년 간의 할인율 변동폭을 적용하여 민감도분석을 실시한 결과, 변동범위 안에서 변화하더라도 각 대안별 비용우위에 대한 변화는 달라지지 않아 안정적이라고 할 수 있다. 따라서 LCC를 이용한 경제성 평가는 가축분뇨 처리시설의 선택을 위한 의사결정에 유용한 평가 지표가 될 수 있으리라 판단된다. 향후 분석의 신뢰성 제고와 활성화를 위해서는 각 비용요소들에 대해 공신력 있는 데이터베이스 구축이 대단히 중요하며, 아울러 시설평가 시 정성적인 요인도 고려할 수 있는 연구가 추가적으로 이루어져야 할 것이다.

경비위험 분석 및 관리의 최적화 방안에 관한 연구 (A Study on the Optimization Methods of Security Risk Analysis and Management)

  • 이두석
    • 시큐리티연구
    • /
    • 제10호
    • /
    • pp.189-213
    • /
    • 2005
  • 경영환경의 변화에 따른 다양한 위험들을 효과적으로 파악하고 이에 대응할 수 있는 위험관리 시스템을 갖추는 것이 기업의 성공과 실패를 결정하는 필수 조건으로 부각됨에 따라, 다양한 위험들을 효과적으로 평가하고 대응책을 제시함으로써 체계적인 위험관리가 이루어져야 하며, 이제는 전사적 위험관리가 새로운 트렌드로 자리잡아가고 있다. 위험요소 분석의 첫 번째 단계는 위험요소를 인지하는 작업으로, 이는 모든 경비시설내에서 손실에 대한 취약성을 확인하는 것을 말한다. 두 번째 단계는 위험요소에 대한 사정이 있어서 손실의 발생가능성을 고려하는 것이고, 세 번째 단계는 손실의 위험성을 평가하는 것이다. 취약성을 평가하고, 손실발생가능성을 측정하고, 그 손실로 인한 위험성을 계량화(수치화)한 위험분석의 결과를 토대로 위험요소별 평가등급을 정하고 최종적으로 위험수준을 결정하게 된다. 위험수준은 경비안전시스템에 대한 보완대책 수립의 기초가 된다. 손실에 대비하고 손실을 최소화하기 위한 위험관리대책을 수립함에 있어 보험이 가장 주요한 수단이기는 하나, 모든 위험을 다 보험에 맡길 수는 없다. 오히려 경비의 비용효과를 고려하고, 경비화일을 활용하여 발전적인 위험관리대안을 제시해야 한다. 이 때 위험요소의 원천을 제거하는 것이 최상의 방책이며, 그 경로를 차단하는 것이 차선이다. 아울러, 안전에 관한 회사내규를 강화하고, 안전과 위험관리에 관한 교육을 지속적이고 반복적으로 실시하여야 한다. 위험관리는 사업의 손실후 연속성을 위해 가장 효율적인 손실전 준비를 하는 것이다. 따라서 가장 비용효과적이고 생산적인 위험관리 방안을 제시하는 것이 무엇보다 중요하며, 이 기능은 지속적으로 유지 발전되어야 한다. 경영환경의 변화에 따른 다양한 위험들을 효과적으로 파악하고 이에 대응할 수 있는 위험관리 시스템을 갖추는 것이 기업의 성공과 실패를 결정하는 필수 조건으로 부각됨에 따라, 다양한 위험들을 효과적으로 평가하고 대응책을 제시함으로써 체계적인 위험관리가 이루어져야 하며, 이제는 전사적 위험관리가 새로운 트렌드로 자리잡아가고 있다. 위험요소 분석의 첫 번째 단계는 위험요소를 인지하는 작업으로, 이는 모든 경비시설내에서 손실에 대한 취약성을 확인하는 것을 말한다. 두 번째 단계는 위험요소에 대한 사정이 있어서 손실의 발생가능성을 고려하는 것이고, 세 번째 단계는 손실의 위험성을 평가하는 것이다. 취약성을 평가하고, 손실발생가능성을 측정하고, 그 손실로 인한 위험성을 계량화(수치화)한 위험분석의 결과를 토대로 위험요소별 평가등급을 정하고 최종적으로 위험수준을 결정하게 된다. 위험수준은 경비안전시스템에 대한 보완대책 수립의 기초가 된다. 손실에 대비하고 손실을 최소화하기 위한 위험관리대책을 수립함에 있어 보험이 가장 주요한 수단이기는 하나, 모든 위험을 다 보험에 맡길 수는 없다. 오히려 경비의 비용효과를 고려하고, 경비화일을 활용하여 발전적인 위험관리대안을 제시해야 한다. 이 때 위험요소의 원천을 제거하는 것이 최상의 방책이며, 그 경로를 차단하는 것이 차선이다. 아울러, 안전에 관한 회사내규를 강화하고, 안전과 위험관리에 관한 교육을 지속적이고 반복적으로 실시하여야 한다. 위험관리는 사업의 손실후 연속성을 위해 가장 효율적인 손실전 준비를 하는 것이다. 따라서 가장 비용효과적이고 생산적인 위험관리 방안을 제시하는 것이 무엇보다 중요하며, 이 기능은 지속적으로 유지 발전되어야 한다.

  • PDF

디지털미디어 환경(環境)에서 디자인 특성(特性)에 관한 연구(硏究) - 실내제품(室內製品) 디자인을 중심으로 - (A Destructive Method in the Connection of the Algorithm and Design in the Digital media - Centered on the Rapid Prototyping Systems of Product Design -)

  • 김석화
    • 조형예술학연구
    • /
    • 제5권
    • /
    • pp.87-129
    • /
    • 2003
  • The purpose of this thesis is to propose a new concept of design of the 21st century, on the basis of the study on the general signification of the structures and the signs of industrial product design, by examining the difference between modern and post-modern design, which is expected to lead the users to different design practice and interpretation of it. The starting point of this study is the different styles and patterns of 'Gestalt' in the post-modern design of the late 20th century from modern design - the factor of determination in industrial product design. That is to say, unlike functional and rational styles of modern product design, the late 20th century is based upon the pluralism characterized by complexity, synthetic and decorativeness. So far, most of the previous studies on design seem to have excluded visual aspects and usability, focused only on effective communication of design phenomena. These partial studies on design, blinded by phenomenal aspects, have resulted in failure to discover a principle of fundamental system. However, design varies according to the times; and the transformation of design is reflected in Design Pragnanz to constitute a new text of design. Therefore, it can be argued that Design Pragnanz serves as an essential factor under influence of the significance of text. In this thesis, therefore, I delve into analysis of the 20th century product design, in the light of Gestalt theory and Design Pragnanz, which have been functioning as the principle of the past design. For this study, I attempted to discover the fundamental elements in modern and post-modern designs, and to examine the formal structure of product design, the users' aesthetic preference and its semantics, from the integrative viewpoint. Also, with reference to history and theory of design my emphasis is more on fundamental visual phenomena than on structural analysis or process of visualization in product design, in order to examine the formal properties of modern and post-modern designs. Firstly, In Chapter 1, 'Issues and Background of the Study', I investigated the Gestalt theory and Design Pragnanz, on the premise of formal distinction between modern and post-modern designs. These theories are founded upon the discussion on visual perception of Gestalt in Germany in 1910's, in pursuit of the principle of perception centered around visual perception of human beings. In Chapter 2, I dealt with functionalism of modern design, as an advance preparation for the further study on the product design of the late 20th century. First of all, in Chapter 2-1, I examined the tendency of modern design focused on functionalism, which can be exemplified by the famous statement 'Form follows function'. Excluding all unessential elements in design - for example, decoration, this tendency has attained the position of the international style based on the spirit of Bauhause - universality and regularity - in search of geometric order, standardization and rationalization. In Chapter 2-2, I investigated the anthropological viewpoint that modern design started representing culture in a symbolic way including overall aspects of the society - politics, economics and ethics, and its criticism on functionalist design that aesthetic value is missing in exchange of excessive simplicity in style. Moreover, I examined the pluralist phenomena in post-modern design such as kitsch, eclecticism, reactionism, hi-tech and digital design, breaking away from functionalist purism of modern design. In Chapter 3, I analyzed Gestalt Pragnanz in design in a practical way, against the background of design trends. To begin with, I selected mass product design among those for the 20th century products as a target of analysis, highlighting representative styles in each category of the products. For this analysis, I adopted the theory of J. M Lehnhardt, who gradated in percentage the aesthetic and semantic levels of Pragnantz in design expression, and that of J. K. Grutter, who expressed it in a formula of M = O : C. I also employed eight units of dichotomies, according to the G. D. Birkhoff's aesthetic criteria, for the purpose of scientific classification of the degree of order and complexity in design; and I analyzed phenomenal aspects of design form represented in each unit. For Chapter 4, I executed a questionnaire about semiological phenomena of Design Pragnanz with 28 units of antonymous adjectives, based upon the research in the previous chapter. Then, I analyzed the process of signification of Design Pragnanz, founded on this research. Furthermore, the interpretation of the analysis served as an explanation to preference, through systematic analysis of Gestalt and Design Pragnanz in product design of the late 20th century. In Chapter 5, I determined the position of Design Pragnanz by integrating the analyses of Gestalt and Pragnanz in modern and post-modern designs In this process, 1 revealed the difference of each Design Pragnanz in formal respect, in order to suggest a vision of the future as a result, which will provide systemic and structural stimulation to current design.

  • PDF

Silane의 처리시기와 타액오염이 도재-레진 시멘트의 전단 결합강도에 미치는 영향 (The effect of silane treatment timing and saliva contamination on shear bond strength of resin cement to porcelain)

  • 노영선;류재준;서규원
    • 대한치과보철학회지
    • /
    • 제47권1호
    • /
    • pp.61-69
    • /
    • 2009
  • 서론: 인접 자연치와 아름답고 자연스런 조화를 이루는 심미적 치료를 위해 도재 수복물은 대중적인 치료방법의 하나로 잡고 있다. 임상에서 도재 수복물이 제작 후 치아에 시멘트로 접착을 하기 전 먼저 구강 내에서 시적할 때 수복물 표면에 타액, 혈액, 시적용 시멘트 등으로 인해 오염될 수 있다. 연구 목적: 이 연구의 목적은 도재 수복물로 사용되고 있는 라미네이트 도재에 실란 결합제의 처리 시기를 달리할 때와 도재 수복물을 치아에 시적 할 때 타액의 오염여부가 실란 결합제의 물리적, 화학적 반응성에 미치는 영향을 관찰하여 도재와 레진 시멘트 사이의 결합력의 안정성을 평가하는 것이다. 연구 재료 및 방법: 라미네이트용 도재를 360개의 원반모형과 5개의 정사각형 모형으로 제작하여 20군으로 나눈다. 각 군에 표면처리를 달리 한 뒤 푸리에 적외선 분광계, 접촉각 측정기와 인스트론 만능 시험기를 이용해 화학적, 물리적 비교를 하였다. 통계는 각 군의 전단 결합 강도의 유의성을 검증하기 위하여 일원분산분석(ANOVA) 후 사후검정은 던넷 다중비교 (Dunnett's multiple comparison)를 시행하였다 (P > .05). 연구 결과: 푸리에 적외선 분광 자료에 의해 본 타액 오염 및 실란의 처리 시기에 따른 화학적 변화는 크지 않았다. 접촉각은 타액 오염 후 낮아졌으나 인산으로 산 부식 후 각도가 증가하였다. 전단 결합강도값은 열 순환후의 군에서 미리 실란으로 보호한 경우에 유의한 차이가 있었다. 결론: 수복물의 내구성에 영향을 미치는 다양한 구강환경과 유사한 조건에서 수복물의 물성평가를 같이 고려해 볼 때 실란 결합제를 이용한 수복물의 접착시 실란 결합제를 수복물에 미리 도포하여 일정시간의 경과 후 수복물을 접착하며, 타액 오염이 발생할 경우 인산으로 수복물을 세척하는 것이 유용한 방법 임을 알 수 있었다

알칼리와 열처리에 의한 임플란트의 표면 특성 및 골유착 안정성에 관한 연구 (Surface characteristics and stability of implants treated with alkali and heat)

  • 송윤석;조인호
    • 대한치과보철학회지
    • /
    • 제46권5호
    • /
    • pp.490-499
    • /
    • 2008
  • 생체 활성 재료는 생체 내에서 자가적으로 인회석 층 (apatite layer)을 형성하여, 골과의 생화학적 결합이 가능해야 한다. 알칼리와 열처리를 통하여 생체 활성 표면을 얻을 수 있는 것으로 보고되고 있다. 본 실험에서는 알칼리 및 열처리를 시행한 임플란트들의 안정성을 평가하고자 하였다. 실험군의 분류로 1군은 대조군인 선반 가공 임플란트군, 2, 3군은 $60^{\circ}C$, 5 M의 NaOH 용액에 24시간 처리한 후, 각각 대기 중 및 진공 상태 $600^{\circ}C$에서 1시간 동안 열처리하였다. 처리된 시편은 FESEM, XPS, TF-XRD 및 AFM을 이용하여 표면 특성을 관찰하고, 임플란트의 안정성을 위해 공진 주파수와 페리오테스트 및 역 토오크를 측정하고, 골유착 안정성에 관한 차이를 비교 분석하여 다음과 같은 결과를 얻었다. 1. 표면 특성: 알칼리 및 열처리를 시행한 2, 3군은 비슷한 양상의 거친 표면을 보여주었다. 알칼리 처리를 시행한 2군과 3군에서 1군과는 달리 높은 함량의 나트륨 이온이 검출되었으며, 결정구조 분석 결과 2군에서 예추석 (antase)과 금홍석 (rutile)이 혼재된 상태로 금홍석이 우세한 양상을 보여주었다. 2. 공진 주파수 분석: 군간 비교에서 12주에 2군이 1, 3군에 비해 통계적으로 유의하게 높은 측정치를 보였다. 주간 비교시, 1, 2군은 4주 이후에 유의한 증가를 보여주었고, 3군은 2주와 4주에서 각각 유의한 증가를 보여주었다 (P < .05). 3. 페리오테스트 분석: 주간 비교에서 1, 2군은 4주 이후에 유의하게 감소를, 3군은 2주와 4주에서 각각 유의한 감소를 보여주었다 (P< .05). 4. 역 토오크 분석: 군간 비교에서는 2, 4, 8주에서는 2군이 1, 3군에 비해 유의하게 높은 측정값을 보여주었다. 주간 비교에서는 1, 3군은 4주, 12주에서 유의한 증가를 보여주었고, 2군은 4주부터 유의한 증가를 보여주었다 (P < .05). 이상의 결과로 볼 때, 알칼리 및 대기 중 열처리를 통해서 적절한 결정 구조의 산화막을 가진 생체 활성화된 무정형의 나트륨 티탄산염 층을 얻을 수 있었고, 알칼리 및 진공 상태 열처리만으로도 나트륨이 함유된 생체 활성화된 표면을 얻을 수 있었다고 사료된다. 또한 이런 처리 과정으로 형성된 표면층들은 임플란트의 초기 골유착에 도움을 줄 수 있는 유용한 방법 중 하나라고 사료된다.

기계학습을 이용한 단일 관련자극 P300기반 숨김정보검사 (One-probe P300 based concealed information test with machine learning)

  • 김혁;김현택
    • 인지과학
    • /
    • 제35권1호
    • /
    • pp.49-95
    • /
    • 2024
  • 국내 형사소송절차에서 진술의 진위여부 확인을 위해 사용하는 도구는 폴리그래프검사, 진술타당도분석, P300 기반 숨김정보검사 등이 있고, 이 중에서 폴리그래프검사의 사용빈도가 다른 도구들에 비하여 높다. 하지만, 검사결과를 뒷받침해 줄 수 있는 근거의 부족으로 인하여 재판과정에서 증거채택 가능성이 낮다. 폴리그래프검사를 뒷받침해 줄 수 있는 방법으로, 사전연구가 풍부한 P300기반 숨김정보검사가 주목을 받아 왔지만, 기존의 검사기법은 두 가지 제한점이 있어 실제 사건에서의 활용도는 낮은 편이다. 첫째, 검사에 필요한 관련자극만 3개 또는 6개 등, 사전에 노출되지 않은 정보가 다수 필요하기 때문에 실제 사건에서 사용 가능성이 낮다. 둘째, 기존의 P300기반 숨김정보검사 프로토콜에서는 관련자극과 무관련자극에 대한 P300요소 전위값을 명확하게 구분하기 위하여 오드볼패러다임을 사용하기 때문에 무관련자극에 대한 P300요소 전위값이 과소 추정될 가능성이 있다. 본 연구에서는 검사의 사용 가능성을 높이기 위하여 사전에 노출되지 않은 정보가 단 하나만 있어도 검사가 가능한 단일 관련자극을 사용하는 수정된 P300기반 숨김정보검사 프로토콜을 탐색하였고, 오드볼패러다임 사용으로 인한 무관련자극에 대한 P300요소 전위값이 과소 추정되는 문제를 보완하기 위하여 다양한 기계학습의 분류 알고리즘을 비교하였다. 연구결과 단일 관련자극으로 여성과 남성의 얼굴자극을 사용할 경우, 자극은 400ms 지속시간으로 60회 제시하고, 절단값을 유죄집단은 90%로 무죄집단은 30%로 하여 정점-정점 방법으로 P300요소 전위값을 분석하는 것이 적합함을 확인하였다. 단어자극의 경우, 지속시간을 300ms로 60회 제시하고, P300요소 전위값 분석방법은 얼굴자극과 동일하게 시행하는 것이 적합하다는 것을 확인하였다. 또한 관련자극과 무관련자극에 대한 정점-정점 P300요소 전위값을 6가지 기계학습 분류 알고리즘을 사용하여 분석한 결과, 로지스틱 회귀(LR), 선형 판별 분석(LDA), K-최근접 이웃(KNN) 알고리즘이 관련자극과 무관련자극의 분류에 적합하다는 것을 확인하였다.

영국 2015년 보험법 상 담보(워런티)에 관한 연구 (A Study on Warranty in The Insurance Act 2015)

  • 신건훈;이병문
    • 무역상무연구
    • /
    • 제73권
    • /
    • pp.65-90
    • /
    • 2017
  • The rule of warranty in English insurance law was established in the second part of the $18^{th}$ century by Lord Mansfield, who laid the foundations of the modern English law of insurance contract and developed very different rule of insurance law, especially in the field of warranty. At the time of Lord Mansfield, warranty, that is, the promise given by the assured, played an important role for the insurer to assess the scope of the risk. Legal environments, however, have changed since the age of Lord Mansfield. English and Scottish Commissions proposed very dramatic reform of law in the field of warranty law to reflect the changes of legal environment through the Insurance Act 2016. This article intends to consider the legal implications through the comparative analysis between the new regime of warranty in the Insurance Act 2015 and MIA 1906. The major changes in the Insurance Act 2015 are summarized as following. First, Basis of the contract clauses in non-consumer insurance contracts should be of no effect and representations should not be capable of being converted into warranties by means of a policy term or statement on the proposal form. This requirement should not be capable of being avoided by the use of a contract term and the arrangement of contracting out by parties should be of no effect. Secondly, The existing remedy for breach of warranty, that is, automatic discharge of the insurer's liability, should be removed. Instead, the insurer's libility should be suspended from the point of breach of warranty and reattach if and when a breach of warranty has been remedies. Thirdly, A breach of warranty should genally be regarded as remedied where the insured ceases to be in breach of it. In the other hand, for time-specific warranties which apply at or by an ascertainable time, a breach should be regarded as remedies, if the risk to which the warranty relates later, becomes essentially the same as that originally contemplated by the parties. Fourthly, where a term of an insurance contract relates to a particular kind of loss, or loss at a particular location/time, the breach of that term should only give the remedy in relation to loss of that particular kind of loss, or at a particular location/time. Finally, whether a term of an insurance contrat relates to loss of a particular kind of at a particular location/time should be determined objectively, based on whether compliance with that ther would tend to reduce the risk of the occurrence of that category of loss.

  • PDF

과학수업에서 문제중심학습의 적용 및 효과 분석 (The Application of the Problem Based Learning Model in Science Classes and Analysis of It's Effects)

  • 박수경
    • 과학교육연구지
    • /
    • 제33권2호
    • /
    • pp.353-364
    • /
    • 2009
  • 과학 교수학습 과정에서 학습자들에게 문제를 해결하는 과정을 통해 비판적 사고 기능과 협동 기능을 신장하도록 하는 문제중심학습의 적용이 필요하며 이를 위한 구체적인 방안이 요구된다. 본 연구에서는 문제중심학습을 위한'문제상황'을 개발하고 이를 고등학교 과학수업에 적용한 후 학습자의 과학 성취도와 과학에 대한 태도 및 문제중심학습에 대한 인식을 조사 하였다. 고등학교 10학년을 대상으로 실험집단에는 '온실효과를 줄이기 위한 미래의 에너지'와 '인도네시아 산불과 엘니뇨'라는 문제 상황으로 문제중심학습을 실시하였고 통제집단은 학습지를 활용한 교사중심 수업을 실시한 결과는 다음과 같다. 첫째, 학습능력 수준과 무관하게 문제중심학습이 교사중심 수업보다 과학 성취도에 효과적인 것으로 나타났다. 둘째, 문제중심학습이 과학에 대한 태도에 미치는 효과를 검증한 결과, 과학수업의 즐거움 범주에서는 효과가 나타났으나 과학적 탐구에 대한 태도 범주와 과학적 태도의 적용 범주에서는 효과가 나타나지 않았다. 셋째, 문제중심학습에 대한 인식 조사 결과, 주어진 문제상황에서 문제를 구체적으로 진술해 내는 과정을 가장 어려워하면서도 또한 도움이 되는 활동으로 인식하였다. 이러한 연구 결과로부터, 과학 교육과정에 기초하면서 실제적이고 맥락적인 문제상황의 개발이 우선적인 과제임을 알 수 있었다.

  • PDF

IN VITRO MARGINAL FIT OF THE COMPUTERAIDED MILLED CERCON CROWNS

  • Chang, Jae-Yoon;Yang, Jae-Ho;Han, Jung-Suk;Lee, Jai-Bong
    • 대한치과보철학회지
    • /
    • 제43권3호
    • /
    • pp.306-313
    • /
    • 2005
  • Statement of problem. There have been many studies about marginal discrepancy of single restorations made by various systems and materials. But most of statistical inferences are not definite because of sample size, measurement number, measuring , instruments, etc. And there have been few studies about the marginal fit of Computer-aided Cercon crowns. Purpose. The purpose of this study was to compare the marginal fit of the anterior single restorations made using computer-aided milled Cercon crowns with metal-ceramic restorations and to obtain more accurate information by using a large enough sample size and by making sufficient measurements per specimen. Material and methods. The in vitro marginal discrepancies of computer-aided milled Cercon crowns and control groups (metal ceramic crowns) were evaluated and compared. The crowns were made from one extracted maxillary central incisor prepared by milling machine. 30 crowns per each system were fabricated. Measurements of a crown were recorded at 50 points that were randomly selected for marginal gap evaluation. Parametric statistical analysis was performed for the results. Results. The means and standard deviations of the marginal fit were 85$\pm$22$\mu$m for the control group and 91$\pm$15$\mu$m for the Cercon crowns. The t-test of the marginal discrepancies between Cercon crowns and metal-ceramic crowns were performed. Significant differences were not found between groups (P=0.230>.05). Based on the criterion of 120$\mu$m as the limit of clinical acceptability, the mean marginal fits of Cercon crowns and metal-ceramic crowns were acceptable. Conclusion. Within the limitations of this in vitro study, the following conclusions were drawn: 1. Mean gap dimensions and standard deviations at the marginal opening for maxillary incisal crowns were 85$\pm$22$\mu$m for the control (metal-ceramic crowns), 91$\pm$15$\mu$m for Cercon crowns. 2. The Cercon crowns showed slightly larger marginal gap discrepancy than the control but marginal gap between Computer-aided milled Cercon crowns and metal ceramic crowns did not showed significant difference (P>.05). 3. The Cercon crowns and metal ceramic crowns showed clinically acceptable marginal discrepancy.