• Carbon letters
• /
• 제14권1호
• /
• pp.22-26
• /
• 2013

The effects of heat treatment temperature (HTT) of polyacrylonitrile-based carbon fiber (CF) on the mechanical, thermal, and tribological properties of C/C composites were investigated. It was found that HTT (graphitization) of CF affects the thermal conductivity and mechanical and tribological characteristics of C/C composites. Thermal treatment of fibers at temperatures up to $2800^{\circ}C$ led to a decrease of the wear rate and the friction coefficient of C/C composite-based discs from 7.0 to 1.1 ${\mu}m$/stop and from 0.356 to 0.269, respectively. The friction surface morphology and friction mechanism strongly depended on the mechanical properties of the CFs. The relief of the friction surface of composites based on CFs with final graphitization was also modified, compared to that of composites based on initial fibers. This phenomenon could be explained by modification of the abrasive wear resistance of reinforcement fibers and consequently modification of the friction and wearing properties of composites. Correlation of the graphitization temperature with the increased flexural and compressive strength, apparent density, and thermal conductivity of the composites was also demonstrated.

• 한국추진공학회지
• /
• 제15권6호
• /
• pp.63-69
• /
• 2011

스마트 무인기의 엔진은 터보 축 엔진이지만 추진계통 제어는 회전익 항공기와 고정익 항공기에 필요한 특성을 모두 가져야 한다. 향후 전자식 엔진제어기를 개발하기 위해서는 틸트 로터 항공기의 엔진 운용 경험과 데이터를 축적할 필요가 있다. 이를 위해 정상상태 및 천이 상태에서의 엔진성능을 예측할 수 있는 프로그램을 활용하여 비행시험 데이터를 보완할 수 있다. 본 연구에서는 비행시험으로부터 수집한 엔진성능 데이터를 이용하여 동적 거동 해석 프로그램을 개발하고, 비행시험 결과 및 정상상태 엔진성능예측 프로그램으로 계산한 결과와 비교하여 프로그램의 정확도를 검증하였다.

• 한국항공우주학회지
• /
• 제39권9호
• /
• pp.858-865
• /
• 2011

본 논문은 연료전지 항공기를 위한 고체상태 $NaBH_4$의 수소발생 및 연료전지 구동 특성에 대해서 기술하고 있다. 수소 저장밀도를 높이기 위해서 고체상태 $NaBH_4$와 염산을 반응시켜 수소를 발생시키는 방법을 사용하였다. 다양한 반응 조건에서 고체상태 $NaBH_4$의 수소 발생률을 측정하였다. 고체 $NaBH_4$의 수소 발생률은 염산의 주입속도와 농도에 영향을 받지만, 환경온도에 영향을 받지 않는 것을 확인하였다. 연료전지를 고체 $NaBH_4$ 수소 발생기에 연결하였다. 전기적 부하가 서서히 혹은 급격히 증가하여도 안정적인 출력을 유지하는 것을 확인하였다.

• 한국국방경영분석학회지
• /
• 제22권2호
• /
• pp.166-181
• /
• 1996

Aircraft survivability is determined by the susceptibility and the vulnerability. The aircraft susceptibility and vulnerability depend upon the hardware and software factors. Each of the hardware and software factors consisted of the qualitative and quantitative attributes varies according to the time of the mission. In order to establish the mathermatical model to analyze and evaluate the aircraft survivability, qualitative factors have to be transformed into quantitative factors. Even if many researches in the area of dynamic concept analysis and conversion of qualitative factors into the quantitative factors has been insufficient. This research enhances these insufficient area by developing a reliable aircarft survivability analysis method. The major areas of this research are as follows. First, a method for the conversion of the qualitative factors into the quantitative factors is developed by combining the Fuzzy Set Theory concept and the Delphi Technique. Second, by using the stochastic network diagram for the dynamic survivability analysis, the aircraft survivability and the probability of kill are calculated from the state probability for the situation during mission. The advantage of the analysis technique developed in this research includes ease of use and flexibility. In other words, in any given aircraft's mission execution under any variable probability density function, the developed computer program is able to analyze and evaluate the aircraft survivability.

• Nuclear Engineering and Technology
• /
• 제54권1호
• /
• pp.326-342
• /
• 2022

Comparative analyses of a shield building subjected to a large commercial aircraft impact between decoupling method and coupling method are performed in this paper. The decoupling method is applying impact force time-history curves on impact area of the shield building to study impact damage effects on structure. The coupling method is using a model including aircraft and shield building to perform simulation of the entire impact process. Impact force time-history curves of the fuselage, wing and engine and their total impact force time-history curve are obtained by the entire aircraft normally impacting the rigid wall. Taking aircraft structure and impact progress into account some loading areas are determined to perform some comparative analyses between decoupling method and coupling method, the calculation results including displacement, plastic strain of concrete and stress of steel plate in impact area are given. If the loading area is determined unreasonably, it will be difficult to assess impact damage of impact area even though the accurate impact force of each part of aircraft obtained already. The coupling method presented at last in this paper can more reasonably evaluate the dynamic response of the shield building than the decoupling methods used in the current nuclear engineering design.

• 제어로봇시스템학회논문지
• /
• 제14권6호
• /
• pp.580-586
• /
• 2008

Icing cloud generation system was developed to perform the in-flight icing simulation test for T-50 Supersonic Jet Trainer on the ground. The developed system successfully generated the almost natural icing cloud in the super-cooled state (liquid state) below freezing point and with the required LWC (Liquid Water Content). For full-scale aircraft icing test, an icing scaling method was adopted due to the limitation of wind generation speed with open-circuit type blower and its applicability was experimentally verified. Under the required in-flight icing condition based on the icing scaling method, T-50 aircraft subsystems were successfully operated and functionally checked.

• International Journal of Aeronautical and Space Sciences
• /
• 제9권1호
• /
• pp.162-168
• /
• 2008

A design objective for variable stability flight control system is to develop a controller of in-flight simulation capability that forces the aircraft being flown to follow the dynamics of other aircraft. This paper presents a model-following variable stability control system (VSS) for in-flight simulation which consists of feedforward and feedback control laws, the aircraft dynamic model to be simulated, and switching and fader logics to reduce the transient effect between two aircraft dynamics. The separate design techniques for feedforward and feedback control law proposals are based on model matching and augmented linear quadratic (LQ) techniques. The system allows pilots to select and engage VSS mode, and when deselected, the aircraft reverts to the baseline flight control system. Both the baseline flight control laws and VSS control laws are computed continuously during flight. Initialization of the state values are necessary to prevent instability, since VSS control laws have integrators and filters in longitudinal, and lateral/directional axes. This paper demonstrates and validates the effectiveness and quality of VSS with F-16 models embedded in T-50 in-flight simulation aircraft.

• 항공우주시스템공학회지
• /
• 제1권3호
• /
• pp.21-25
• /
• 2007

This is a study on the establishment of airworthiness certification system fitted for korean military aircraft acquisition and export. Based on the investigation of US civil & military airworthiness system and analysis of the real state of domestic military aircraft acquisition, this paper offers some ideas that can be helpful to establish laws and organizations to certify airworthiness. Particularly this paper suggests that the best way to build airworthiness certification laws/guidelines and technical criteria, the optimal organizational structure which is decentralized by dividing administrative certification authority and technical research center.

• 제어로봇시스템학회논문지
• /
• 제11권11호
• /
• pp.963-969
• /
• 2005

An advanced method of Relaxed Static Stability (RSS) is utilized for improving the aerodynamic performance of modem version supersonic jet fighter aircraft. The flight control system utilizes RSS criteria in both longitudinal and lateral-directional axes to achieve performance enhancements and improve stability. The T-50 advanced trainer employs the RSS concept in order to improve the aerodynamic performance and the flight control law in order to guarantee aircraft stability, The T-50 longitudinal control laws employ the dynamic inversion and proportional-plus-integral control method. This paper details the design process of developing longitudinal control laws for the RSS aircraft, utilizing the requirement of MIL-F-8785C. In addition, This paper addresses the analysis of aircraft characteristics such as damping, natural frequency, gain and phase margin about state variables for longitudinal inner loop feedback design.

• 한국수소및신에너지학회논문집
• /
• 제9권2호
• /
• pp.85-92
• /
• 1998

The hydrogenation behavior of $Mg_2Ni$ powder prepared by ball milling has been studied. Ball milled $Mg_2Ni$ was transformed to an amorphous-like state after 200hr ballmilling, and crystallized to $Mg_2NiH_x$ by hydrogenation at got. The hydrogen storage capacity gradually increased as a function of ball milling time. $Mg_2Ni$ by 400hr ballmilling shows higher hydrogen storage capacity (3H/M) than $Mg_2Ni$ by VIM(Vacuum Induction Melting).