• Steel and Composite Structures
• /
• 제43권3호
• /
• pp.363-373
• /
• 2022

As a key reinforcement connection between a tower and a substructure in offshore wind turbine system, the transition piece is inevitably subjected to cyclic dynamic environmental loads such as wind, current and wave. Therefore, well designed transition piece with high strength and good fatigue resistance is of great significance to the structural safety and reliability of offshore wind power systems. In this study, the structural behavior of the transition piece was studied by an extensive sets of finite element analyses. Three widely used types of transition piece were considered. The characteristics of stress development, fatigue life and weight depending on the type of the transition piece were investigated in the ultimate limit state (ULS) and the fatigue limit state (FLS) of a 5-MW offshore wind turbine to be placed in Korea. An optimal form of the transition piece was proposed based on this parametric study.

• 품질경영학회지
• /
• 제20권1호
• /
• pp.11-21
• /
• 1992

The Purpose of this paper contribute to design the multistate Markov process for the reliability of a system when the transition-rates of each unit depend on the current state of the system. The system transition-rate matrix has the form of the kronecker sum of transition rate matrices for the units, is analyzed and investigated. As a result, the system which has the state-dependent units is detaily analyzed and introduced by the approach of an algorithm for the system transition-rate matrix based on the kronecker algebra.

• Bulletin of the Korean Chemical Society
• /
• 제19권11호
• /
• pp.1179-1184
• /
• 1998

Mesogenic and azo monomers were synthesized and copolymerized to obtain two copolymers composed of methacrylate and itaconate backbone. Glass transition temperatures of the copolymers were found to be slightly higher than ambient temperature. Both the copolymers showed liquid crystalline properties. Trans-cis isomerization in film state was observed under UV-irradiation with a light of 365 nm. Regarding the photochemical phase transition behavior, the transition rate of nematic-to-isotropic state was slightly faster in the methacrylate copolymer during irradiation at 365 nm and the rate of the reverse transition was much faster in itaconate copolymer under thermal effect.

• 한국통신학회논문지
• /
• 제17권4호
• /
• pp.415-423
• /
• 1992

본 논문에서는 상태합성기 설계를 위하여 상태그래프를 자동으로 CHDL로 변환하는 그래픽 에디터를 개발하였다. 또한 FSN 합성과정 중에 상태테이블의 중독상태를 제거 할 수 있는, 구성이 간단하고 빠른 시간내에 최소해를 구할 수 있는 상태축소 알고리즘을 제안하였다.

• 전자공학회논문지C
• /
• 제34C권12호
• /
• pp.1-8
• /
• 1997

In this paper, a new method of state code assignment for reduction of switching activities of state transition in asynchronous circuits is proposed. The algorithm is based on a on-hot code and modifies it to reduce switching activities. To estimate switching activities as a cost functions we introduce state transition probability (STP). AS a results, the proposed algorithm has an advantage of 60% over with the conventional code assignment in terms of switching and code length of state assignment.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권1호
• /
• pp.441-447
• /
• 2014

Background: Multi-state models are appropriate for cancer studies such as gastrectomy which have high mortality statistics. These models can be used to better describe the natural disease process. But reaching that goal requires making assumptions like Markov and homogeneity with time. The present study aims to investigate these hypotheses. Materials and Methods: Data from 330 patients with gastric cancer undergoing surgery at Iran Cancer Institute from 1995 to 1999 were analyzed. To assess Markov assumption and time homogeneity in modeling transition rates among states of multi-state model, Cox-Snell residuals, Akaikie information criteria and Schoenfeld residuals were used, respectively. Results: The assessment of Markov assumption based on Cox-Snell residuals and Akaikie information criterion showed that Markov assumption was not held just for transition rate of relapse (state 1 ${\rightarrow}$ state 2) and for other transition rates - death hazard without relapse (state 1 ${\rightarrow}$ state 3) and death hazard with relapse (state 2 ${\rightarrow}$ state 3) - this assumption could also be made. Moreover, the assessment of time homogeneity assumption based on Schoenfeld residuals revealed that this assumption - regarding the general test and each of the variables in the model- was held just for relapse (state 1 ${\rightarrow}$ state 2) and death hazard with a relapse (state 2 ${\rightarrow}$ state 3). Conclusions: Most researchers take account of assumptions such as Markov and time homogeneity in modeling transition rates. These assumptions can make the multi-state model simpler but if these assumptions are not made, they will lead to incorrect inferences and improper fitting.

• ETRI Journal
• /
• 제5권4호
• /
• pp.17-21
• /
• 1983

Sine call handling for stored program control exchange can be regarded as finite state machine model of sequential process, the state transition concept is applied to describe its functions. Coding method of the state transition table applied to M10CN ESS call processing and concerned topics was discussed and proposed another method for reduction memory usage.

• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 2001년도 Bulletin of The 5th Asian Design Conference International Symposium on Design Science
• /
• pp.77-77
• /
• 2001

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.437-438
• /
• 2005

A polymer stabilization method is employed to reduce the transition time from field-induced homeotropic(H) state to reflecting planar(P) state in the cholesteric liquid crystal(ChLC) display. To stabilize ChLC by polymer, we mixed ChLC with diacrylate of 2 $wt%{\sim}6$ wt%. Two samples were made with different method of stabilization. For one sample the diacrylate of 2 wt% was polymerized with the ChLC in P state, while for the other sample diacrylate of 16 wt% was polymerized with ChLC in H state. In the former case, the transition time was 1000 times faster then those in the pure sample. In the latter sample, the transition time was 1700 times faster than those in pure ChLC sample.

• 한국정보통신학회논문지
• /
• 제8권5호
• /
• pp.1010-1019
• /
• 2004

본 논문에서는 Nakagami-m 페이딩 채널을 Finite-State Markov Channel (FSMC)로 모델링하고, 채널 상태 변화에 따른 통신 시스템의 성능을 분석하였다. 고려한 FSMC 모델에서는 수신 신호의 신호 대 잡음 전력비를 유한개의 구간으로 나눠 각각의 구간을 Markov 체인의 상태로 대응한다. 각 상태는 무기억 이진 대칭 통신로로 가정하고, 한 상태에서 다른 상태로의 천이는 Markov 천이를 따른다고 가정한다. 수치 해석을 통해 각 상태에 있어서의 평균 심볼 오율, 정상 상태 확률 그리고 상태 천이 확률을 구하여 FSMC 모델을 구성하였고, 상태 천이 지수를 변경함으로써 여러 페이딩 환경을 FSMC 모델로 나타낼 수 있음을 확인하였다. 상태 천이 지수가 클 경우인 빠른 페이딩 채널에서는 채널이 i.i.d. 특성을 나타내게 되며, 상태 천이 지수가 작을 경우인 느린 페이딩 채널은 인접한 상태로의 천이만 발생하는 간단한 FSMC 모델로 표현될 수 있음을 확인하였다. 마지막으로 제안한 FSMC 모델의 응용 예로써, 여러 채널 환경에서 랜덤 에러 정정 부호의 부호화 이득의 차이를 컴퓨터 시뮬레이션을 통해 비교, 분석하였다.