• ETRI Journal
• /
• v.5 no.4
• /
• pp.17-21
• /
• 1983

Sine call handling for stored program control exchange can be regarded as finite state machine model of sequential process, the state transition concept is applied to describe its functions. Coding method of the state transition table applied to M10CN ESS call processing and concerned topics was discussed and proposed another method for reduction memory usage.

• International Journal of High-Rise Buildings
• /
• v.2 no.1
• /
• pp.79-83
• /
• 2013

Shaking table test is an important and useful method to help structural engineers get better knowledge about the seismic performance of the buildings with complex structure, just like Shanghai tower. According to Chinese seismic design guidelines, buildings with a very complex and special structural system, or whose height is far beyond the limitation of interrelated codes, should be firstly studied through the experiment on seismic behavior. To investigate the structural response, the weak storey and crack pattern under earthquakes of different levels, and to help the designers improve the design scheme, the shaking table model tests of a scaled model of Shanghai tower were carried out at the State Key Laboratory of Disaster Reduction in Civil Engineering, Tongji University, Shanghai, China. This paper describes briefly the structural system, the design method and manufacture process of the scaled model, and the test results as well.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.11
• /
• pp.167-173
• /
• 2002

The look up table method conventionally applied to control the inner temperature and humidity of a laver drying machine has repeatedly occurred not only laver's damage but also inferior goods since the reaching time at the optimum state takes a long time. In this paper, a fuzzy control theory instead of the look up table was proposed to reduce the reaching time at the optimum state. The proposed method used six input variables and four output variables for the fuzzy control, and a triangle rule for a fuzzifier, The Mandani's min-max method was applied to a fuzzy inference. Also, the mean method of maximum was applied to a defuzzifier. The method applied to the fuzzy controller contributed to reduce the reaching time at the optimum state, and to minimize not only laver's damage but also inferior goods.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.35 no.11
• /
• pp.487-494
• /
• 1986

This paper is concerned with the techniques of error check and reduction of state diagram using logic programming. Error check program aims to check not only syntax errors but also semantic errors. And reduction program optimizes the state diagram by finding the redundant equivalence states and removing those from the set of states. The input of both program is state diagram represented as state table form. The output of error check program is error comment. The output of reduction program is equivalence reduced state table. Both programs are implemented using prolog. Prolog has very powerful pattern matching, and its automatic back-tracking capabilities facilitate easy-to-write error check and reduction programs.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.3
• /
• pp.290-297
• /
• 2004

The control laws for cart-pole system are studied to see the schemes on which the control laws are made. Also, the odd symmetry of the relation between the output of the control laws and the system state vector is observed. Utilizing the symmetry in quantizing the system state variables and implementing the control laws into look-up table is discussed. Then, a CMAC is trained for a nonlinear control law for a cart-pole system such that the symmetry is conserved and its learning performance is evaluated. It is found that utilizing the symmetry is to reduce the memory requirement as well as the training period while improving the learning quality in terms of preserving the symmetry.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.10
• /
• pp.171-180
• /
• 2019

In Korea, the seismic design of non-structural elements was interested by Earthquake of the 2016 Gyeong-ju and 2017 Po-hang. Among the non-structural elements, the ceiling system with steel panel used in Po-hang station showed failure examples of non-seismic design ceiling. In this study, the seismic performance of suspended ceiling with steel-panel, such as those used in Po-hang Station, was evaluated by shaking table tests. The shaking table tests were performed in accordance with the ICC-ES AC156 standard with floor acceleration being applied horizontally in one direction using a $3.3{\times}3.3m^2$ frame. The ceiling system consists of steel-panels, carrying channels, main and cross T-bars, and anti-falling clips. The anti-falling clip prevents the steel panel falling completely. The shaking table test confirmed that the damage at the previous stage had a direct impact on the damage state at the next stage. Through the shaking table test, the damage state of the T-bar type steel-panel suspended ceiling system was defined.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.6
• /
• pp.41-47
• /
• 2004

This study is aimed to measure the deflection of loaded table on machine tool. The deflection rate is measured then the table is in a stationary state and is moved. In conclusion we have found that the more load increases, the more the table deflections. Also, we have found that the deflection rate increases in accordance with the speed of movement. Therefore, we have concluded that inspection of machine tool should be done considering the weight of load and the speed of movement. However, since the condition of accuracy test for domestic brand of machine tool is defined as unloaded case, measures should be explored only for loaded case.

• Journal of Multimedia Information System
• /
• v.6 no.4
• /
• pp.323-328
• /
• 2019

In this paper, a method of constructing an advanced sequential circuit over finite fields is proposed. The method proposed an algorithm for assigning all elements of finite fields to digital code from the properties of finite fields, discussed the operating characteristics of T-gate used to construct sequential digital system of finite fields, and based on this, formed sequential circuit without trajectory. For this purpose, the state transition diagram was allocated to the state dependency code and a whole table was drawn showing the relationship between the status function and the current state and the previous state. The following status functions were derived from the status function and the preceding table, and the T-gate and the device were used to construct the sequential circuit. It was confirmed that the proposed method was able to organize sequential digital systems effectively and systematically.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.5
• /
• pp.823-832
• /
• 1987

This pper presents a method for constructing multiple-valued logic sequential machines based on Galois field. First, we assign all elements in GF(2**m) to bit codes using mathematical properties of GF(2**m). Then, we realized the sequencial machine circuits with and withoutm feed-back. 1) Sequential machines with feed-back are constructed by using only MUX from state-transition diagram expressing the information of sequential machines. 2) Sequential machines without feed-back are constructed by following steps. First, we assigned states in state-transition disgram to state bit codes, then obtained state function and predecessor table explaining the relationship between present states and previous states. Next, we obtained next-state function from state function and predecessor table. Finally we realized the circuit using MUX and decoder.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.220-223
• /
• 2002

The digital logic systems(DLS) is classified into digital combinational logic systems(CDLS) and digital sequential logic systems(SDLS). This paper presents a method of constructing the digital sequential logic systems without feedback. Firstly we assign all elements in Finite Fields to P-valued digit codes using mathematical properties of Finine Fields. Also, we discuss the operarional properties of the building block T-gate that is used to realizing digital sequential logic systems over Finite Fields. Then we realize the digital sequential logic systems without feedback. This digital sequential logic systems without feedback is constructed ny following steps. Firstly, we assign the states in the state-transition diagram to state P-valued digit dodo, then we obtain the state function and predecessor table that is explaining the relationship between present state and previous states. Next, we obtained the next-state function and predecessor table. Finally, we realize the circuit using T-gate and decoder.