• Journal of Mechanical Science and Technology
• /
• v.20 no.7
• /
• pp.1019-1029
• /
• 2006

The ballistic range has long been employed in a variety of engineering fields such as high-velocity impact engineering, projectile aerodynamics, creation of new materials, etc, since it can create an extremely high-pressure state in very short time. Of many different types of ballistic ranges developed to date, two-stage light gas gun is being employed most extensively. In the present study, a theoretical work has been made to develop a new type of ballistic range which can easily simulate a flying projectile. The present ballistic range consists of high-pressure tube, piston, pump tube, shock tube and launch tube. The effect of adding a shock tube in between the pump tube and launch tube is investigated. This improvement is identified as the reduction in pressures in the high pressure tube and pump tube while maintaining the projectile velocity. Equations of motions of piston and projectile are solved using Runge-Kutta methods. Dependence of projectile velocity on various design factors such as high pressure tube pressure, piston mass, projectile mass, area ratio of pump tube to launch tube and type of driver gas in the pump tube are also analyzed. Effect of various gas combinations is also investigated. Calculations show that projectile velocities of the order 8 km/sec could be achieved with the present ballistic range.

• Korean Journal of Optics and Photonics
• /
• v.12 no.1
• /
• pp.5-9
• /
• 2001

A wavemeter was realized using the phenomena that the phase lag between principal polarization states in an optical retarder is a function of wavelength. The change in the polarization state of the optical beam as it passes through the optical retarder is dependent on wavelength. The wavelength of the optical beam is determined by comparing the power difference between principal polarization states. A prototype wavemeter was successfully implemented using a polarization maintaining fiber with birefringence $3\times10^{-4}$ and length 100 mm as the optical retarder. The measurement resolution was 0.08 nm over a wavelength region of 1554.38 nm-1557.l9 nm, which agreed well with theoretically calculated results. In addition, the dependence of operating characteristics on temperature was analyzed theoretically and experimentally.mentally.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.8
• /
• pp.906-917
• /
• 2011

This study identified the present state of store and selection criteria of supplier from the regional fashion buyer point of view and examined the effects of the factors of relative impact between buyer and supplier on the relational bond. The interviews and questionnaires were administered to the owners or the sellers of 85 fashion retail stores in Gwangju. For analysis of data, frequency, means, factor analysis, Cronbach's ${\alpha}$ and regression analysis were applied. The results were as follows. First, in the results of examining the actual conditions of store managers for fashion buyers, fashion buyers complained about lengthy travelling and time consumption inconvenience. They also reported decrease in margin and monthly mean sales over last year. Second, the most important selection the criteria for the supplier were product power, followed by a convenient store layout. Finally, higher quality communication, more compromises, and higher dependence were affected with higher satisfaction, trust, and commitment in suppliers; conversely, the trust and commitment of the buyers decreased relative to the increased power of the suppliers.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.3
• /
• pp.68-77
• /
• 1995

Characteristics of electron cyclotron resonance (ECR) plasma thermal oxide grown at low-temperature have been investigated. The effects of several process parameters such as substrate temperature, microwave power, gas flow rate, and process pressure on the growth rate of the oxide have been also investigated. It was found that the plasma density, reactive ion species, is strongly related to the growth rate of ECR plasma oxied. It was also found that the plasma density increases with microwave power while it decreases with decreasing O2 flow rate. The oxidation time dependence of the oxide thichness showed parabolic characteristics. Considering ECR plasma thermal oxidation at low-temperature, the linear as well as parabolic rate constants calculated from fitting data by using the Deal-Grove model was very large in comparison with conventional thermal oxidation. The ECR plasma oxide grown on (100) crystalline-Si wafer exhibited good electrical characteristics which are comparable to those of thermal oxide: fixed oxide charge(N$_{ff}$)= 7${\times}10^{10}cm^{-2}$, interface state density(N$_{it}$)=4${\times}10^[10}cm^{-2}eV^{-1}$, and breakdown field > 8MV/cm.

• Journal of Hydrogen and New Energy
• /
• v.1 no.1
• /
• pp.48-54
• /
• 1989

Semiconductive property of the passivating $TiO_2$ film was investigated by measuring the impedance of passivated titanium electrode in a 0.1 N NaOH solution. The passive film was prepared galvanostatically with $10mA/cm^2$ at formation potential of 50 V in a 1 N $H_2SO_4$ solution. The impedance measurement was conducted by superimposing an ac voltage of 5 m V amplitude with the frequency ranging from 5 to 10000 Hz on a dc bias (applied potential). The donor distribution in the film was depicted from the analysis of the non-linear slope of Mott-Schottky plot. The region with nearly constant concentration of donors near the electrolyte/film interface amounts at about 60 percent of the total film thickness and donor concentration increases largely with distance from the surface in an inner region near the film/metal interface. In a region of the film/metal interface the donor concentration showed a frequency dependence greater than in a region of the electrolyte/film interface. The result of donor concentration against frequency suggests a transition from crystalline to amorphous state with distance from the electrolyte/film interface in the passivating $TiO_2$ films. This is also confirmed by the ac conductivity measurement.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.10
• /
• pp.608-612
• /
• 2016

In this study, in order to develop relaxor ferroelectric ceramics for refrigeration device application with large electrocaloric effect and low sintering temperature, PLZT(8/65/35) ceramics was fabricated using conventional solid-state method with the variation of sintering temperature ($1,050^{\circ}C$, $1,100^{\circ}C$, $1,200^{\circ}C$). The XRD pattern of all specimens indicated general perovskite structure with secondary phase. From the results of temperature dependence of dielectric constant, the $T_C$ (ferroelectric-paraelectric phase transition temperature) was shifted toward high temperature with increasing sintering temperature. When the specimen was sintered at $1,100^{\circ}C$, the optimal value of ${\Delta}T{\sim}0.349^{\circ}C$ in ambient temperature of $215^{\circ}C$ was appeared. It is considered that PLZT(8/65/35) ceramics possess the possibility of refrigeration device application.

• Coupled systems mechanics
• /
• v.5 no.4
• /
• pp.315-327
• /
• 2016

Undergoing large volumetric changes upon incremental environmental stimulation, hydrogels are interesting materials which hold immense potentials for utilization in a wide array of applications in diverse industries. Owing to the large magnitudes of deformation it undergoes, swelling induced instability is a commonly observed sight in all types of gels. In this work, we investigate the instability of photo-thermal sensitive hydrogels, produced by impregnating light absorbing nano-particles into the polymer network of a temperature sensitive hydrogel, such as PNIPAM. Earlier works have shown that by using lights of different intensities, these hydrogels follow different swelling trends. We investigate the possibility of utilizing this fact for remote switching applications. The analysis is built on a thermodynamic framework of inhomogeneous large deformation of hydrogels and implemented via commercial finite element software, ABAQUS. Various examples of swelling induced instabilities, and its corresponding dependence on light intensity, will be investigated. We show that the instabilities that arise have their morphologies dependent on the light intensity.

• Architectural research
• /
• v.20 no.1
• /
• pp.27-34
• /
• 2018

To improve the chloride ingress resistance of concrete, slag is widely used as a mineral admixture in concrete industry. And currently, most of experimental investigations about non steady state diffusion tests of chloride penetration are started after four weeks standard curing of concrete. For slag blended concrete, during submerged chloride penetration tests periods, binder reaction proceeds continuously, and chloride diffusivity decreases. However, so far the dependence of chloride ingress on curing ages are not detailed considered. To address this disadvantage, this paper shows a numerical procedure to analyze simultaneously binder hydration reactions and chloride ion penetration process. First, using a slag blended cement hydration model, degree of reactions of binders, combined water, and capillary porosity of hardening blended concrete are determined. Second, the dependences of chloride diffusivity on capillary porosity of slag blended concrete are clarified. Third, by considering time dependent chloride diffusivity and surface chloride content, chloride penetration profiles in hardening concrete are calculated. The proposed prediction model is verified through chloride immersion penetration test results of concrete with different water to binder ratios and slag contents.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.11
• /
• pp.3706-3713
• /
• 1996

A numerical study on natural convection induced by free surface heat flux and cold left and hot right walls in glass melting furnaces has been performed. A function of heat flux derived from the combustion environments of actual glass melting furnace is applied to thermal boundary condition at free surface. Fundamentally there exist two flow cells in cavity (left counterclockwise one and right clockwise one). The effects of heat flux and Rayleigh number are investigated through two-dimensional steady-state assumption. The convection strength of two flow cell located in left region continuously increases. In the mean time the strength of flow cell in right region increases and then decreases. Critical Rayleigh number in which two flow cells take place above and below show linear dependence on the free surface heat flux. To maintain the traditional flow pattern (left and right flow cells) in glass melting furnace, Rayleigh number is recommended to be below 10$^{5}$ .

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.15 no.3
• /
• pp.179-184
• /
• 1982

The behavior of continuous flow culture of Lartobacillus bulgricus was investigated by application of Monod's kinetic model. The parameters obtained from Monod's chemostat theory successfully predicted the behavior of the chemostat. Then, it was found that Monod's kinetics were applicable to the growth rate dependence on glucose concentration. Under steady-state condition, the maximum growth rate, saturation constant, and wash out were found to be 0.62/hr, 7.69 g/1, 0.51/hr of continuous culture. And the optimum condition for the highest cell production was 0.41/hr in dilution rate, and at that point the cell production rate was 0.178g/1 hr.