• Title/Summary/Keyword: Starch noodle

Search Result 63, Processing Time 0.018 seconds

Textural and sensory properties of rice noodle blended with of hydrocolloids (Hydrocolloids혼합첨가 쌀면의 물리적, 관능적 특성연구)

  • Lee, Hanna;Jang, Eun-Hee;Lee, Jin-Sil;Hong, Wan-Soo;Kim, Young-Shik;Han, Jung-Ah
    • Korean journal of food and cookery science
    • /
    • v.28 no.6
    • /
    • pp.703-709
    • /
    • 2012
  • Using market-selling rice flour, four rice wet noodles were prepared with three hydrocolloids: wheat flour, hydroxypropyl methyl cellulose (HPMC), and potato starch at different levels based on pre-test, and the physical and sensory properties of the noodles were measured and compared. The rice noodle with hydrocolloids showed much higher peak and final viscosity than wheat flour noodle (control). Rice noodle also showed higher hardness, cohesiveness and springiness than control in textural properties, however, the noodle with the highest hydrocolloids (wheat flour 15%, HPMC 12.5%, potato starch 17,5%) showed lowest cohesiveness and springiness values among samples. By sensory evaluation, the rice noodle with 15% wheat flour, 8.5% HPMC, 17.5% potato starch showed the highest scores in appearance, taste, texture and acceptability. HPMC in noodles seemed to influence on the noodle quality than potato starch or wheat flour. For making rice noodle, adequate level of hydrocolloids could improve noodle quality such as viscoelasticity, however, excess addition made the noodle coarse.

Manufacturing and Quality Characteristics of Low Calori Kimchi Noodle (저열량 김치국수의 제조 및 품질특성)

  • Kim, Hyong-Yol;Lim, Heung-Youl
    • Journal of the Korean Society of Food Culture
    • /
    • v.20 no.3
    • /
    • pp.315-322
    • /
    • 2005
  • Kimchi noodle have a original taste and characteristics. This noodle was used for sour kimchi, kimchi taste powder, red bean fiber and emulsified oil etc. with RS(resistant starch) premix as blended wheat flour mixed to resistant starch. For manufacturing process of this kimchi mixed dry noodle, suitable kimchi of $pH3.70{\sim}3.80$ was required storage period during $4{\sim}5days$ at room temperature. At this point, the suitable treating amount of sour kimchi was about 20%(w/w) level. Manufacturing of kimchi noodle could be at the suitable manufacturing condition from use of kimchi taste powder and red bean fiber etc. Calori of this kimchi noodle was 308.17Kcal/100g as low level than wheat flour noodle as 355.82Kcal/100g, decreasing effect of calori was about 13.39%. This kimchi noodle had a characteristic sour and hot taste, that wasn't required the special seasoning and/or soup at this result.

Noodle Making Characteristics of Buckwheat Composite Flours (메밀복합분을 이용한 제면 특성)

  • 김복란;최용순;김종대;이상영
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.28 no.2
    • /
    • pp.383-389
    • /
    • 1999
  • To determine the optimum condition for buckwheat noodle making, we prepared noodle from com posite flours of buckwheat, wheat and corn starch, and those physical properties and sensory evalua tion were investigated. The weights of cooked noodle became lower with increasing buckwheat content level indicating that elution of its components to soup was high. Wheat flour in the composite flours probably caused to drop gelatinization temperature and maximum viscosity compared to buck wheat flours. Corn starch in the composite flours increase gelatinization temperature and maximum viscosity compared to buckwheat flours. From the result of farinogram, buckwheat flour lower water absorption ability, and increased dough development time compared to composite flours. Adhesiveness of the cooked noodle with wheat flour was decreased. Cohesiveness of the cooked noodle was decrea sed with increasing buckwheat flour level. In sensory evaluation, chewing and softness of noodle with 100% buckwheat flour was evaluated the best. In taste, BW1 and BSW1 noodles showed slightly higher preference although there was no significant differences.

  • PDF

History of Korean Starch Industry (한국의 녹말 산업 발달사)

  • Park, Yeon-Sung
    • Food Science and Industry
    • /
    • v.51 no.1
    • /
    • pp.45-60
    • /
    • 2018
  • The starch industry in Korea had been based on sweet potato and potato for long time to produce starches which were used for mainly starch noodle such as cellophane noodle. Because of the poor storage stability, high price, and fluctuation of production by year and year of potatoes, the raw material for the production of starch had been changed to corn in 1970s. Along with this, the mass production system had been established, which enabled the production of various starch-related products including modified starches for food, textile, paper, and other industrial uses, starch sweetners, high fructose corn syrup, and gelatinized starch. In this paper, a brief background of corn industry in Korea has been described. The production of starch from corn has been emphasized and the future of corn industry in relation with GMO has been suggested.

A study on the characteristics and noodle structure made from pea starch-wheat composite flour using a scanning electron microscopy (Scanning Electron Microscopy을 이용한 완두 전분 복합면의 반죽구조 및 특성연구)

  • 김은주;윤재영;김희섭
    • Korean journal of food and cookery science
    • /
    • v.15 no.5
    • /
    • pp.500-506
    • /
    • 1999
  • Scanning electron microscopy was used to study changes in granule shape, dough and cooked noodle structure of pea starch-wheat composite flour with 20% and 30% pea starch substitution. The granule shape of pea starch with low swelling power and solubility was oval, irregular and smooth, which had more a deep groove than corn starch and wheat flour. During gelatinization, pea starch after swelling was partially collapsed but it still held its main shape. The dough microstructure of 20% pea starch substitution showed compact structure distributed with more small starch granules than wheat dough and was held in discontinuous network. When cooked, more open filamentous network where starch gelatinization was complete were noticed. Swollen but partially collapsed large starch granules maintaining their shape were appeared in noodle structure after 30 min soaking in soup. In farinograph studies, 20% pea starch substitution to wheat flour showed that MTI value was as same as wheat flour even though stability was slightly decreased so that it was considered that it has proper property of noodle making.

  • PDF

In vitro Digestibility of Cooked Noodle Products

  • Han, Jung-Ah;Seo, Tae-Rang;Lee, Su-Jin;Lim, Seung-Taik
    • Food Science and Biotechnology
    • /
    • v.16 no.6
    • /
    • pp.1078-1081
    • /
    • 2007
  • The in vitro digestive properties of 6 domestic noodle products (spaghetti, somyeon, ramyeon, dangmyeon, naengmyeon, and jjolmyeon) were compared after cooking under the manufacture's recommended cooking conditions. The kinetic constant (k), representing the rate of hydrolysis at the initial digestion stage, was highest in the somyeon noodles (0.1151), followed by naengmyeon (0.0954), and was lowest in the spaghetti (0.0421). However, the concentration of starch ($C_{\infty}$) hydrolyzed over 2 hr was not different between the spaghetti (96.22) and the somyeon (96.40), indicating that different digestion behaviors occurred in each type of noodle, even though the amounts of digested starch were similar. The ramyeon, dangmyeon, and naengmyeon noodles showed relatively lower $C_{\infty}$ values than the spaghetti and the somyeon noodles. The spaghetti had the highest amount of slowly digestible starch (SDS, 43%) and the lowest glycemic index (GI, 87.8), whereas the somyeon had the lowest SDS value (9.6%) and the highest or (93.0). The digestibility differences among the noodles were attributed to differences in their flour compositions and manufacturing processes.

Effects of the Addition of Starch, Salt and Soda Ash on the Mechanical Property of Naengmyon (전분, 식염 및 알카리 첨가제가 냉면의 기계적 성질에 미치는 영향)

  • Kwon, O-Hun;Lee, Cherl-Ho
    • Korean Journal of Food Science and Technology
    • /
    • v.16 no.2
    • /
    • pp.175-178
    • /
    • 1984
  • The effects of the addition of starch, salt and soda ash to the dough for Naengmyon (wheat-sweet potato starch) on the mechanical property of Naengmyon noodle were evaluated by using creep test. The strain measurement was made by taking photograph with VTR system. The creep curve of noodle strand could be fitted to the 4 element Burgers model. The instantaneous elasticity and Newtonian viscosity of the noodle strand decreased by the addition of starch. The instantaneous elasticity decreased by the addition of salt up to 4%. The mechamical parameters of the noodle varied inconsistently by the addition of soda ash.

  • PDF

Backgrounds of Korean Noodle Industry (한국의 국수 산업 발달사)

  • Kim, Sung-Kon
    • Food Science and Industry
    • /
    • v.50 no.1
    • /
    • pp.36-56
    • /
    • 2017
  • The importance of noodles in Korean diet is becoming greater in recent years. This article is an overview on a variety of Korean noodles including dried noodle, naengmyeon (buckwheat noodle), dangmyeon (starch noodle) and instant fried noodle. It gives also the background information on the changes of the definition of noodles. Since Koreans are the largest consumer of instant fried noodles per capita in the world, primary emphasis was placed on the development history of instant fried noodles.

Rheological Properties of Cooked Noodles with Different Starch Content Using Tensile Tests

  • Kim, Su-Kyoung;Lee, Seung-Ju
    • Food Science and Biotechnology
    • /
    • v.18 no.4
    • /
    • pp.1013-1018
    • /
    • 2009
  • Several rheological terms were introduced to estimate the properties of cooked noodles with different starch content using tensile tests. Ring-shaped specimens were prepared by connecting both ends of the noodle strip before cooking. Hencky strain and rate, as well as true stress were applied in constant deformation tests. The elastic region on the curves of strain vs. stress was not clearly identified. Strain hardening in the subsequent plastic region was more prominent in low-starch noodles. Elongational viscosities at lower strain rates were used to differentiate noodles with different starch content, representing the dominant effect of protein content in the range of lower strain rates. In stress relaxation tests, the reciprocal of Peleg's constant $K_1$ (initial decay rate) and $K_2$ (asymptotic level) increased and decreased respectively, with an increase in starch content. This indicated that addition of starch contributed to the noodles becoming viscous liquid rather than elastic solid.

Studies on the Rheological Property of Korean Noodles -I. Viscoelastic Behavior of Wheat Flour Noodle and Wheat-Sweet Potato Starch Noodle- (한국 재래식 국수류의 유체 변형성에 관한 연구 -제 1 보 : 밀국수와 냉면국수의 점탄성-)

  • Lee, Cherl-Ho;Kim, Cheol-Won
    • Korean Journal of Food Science and Technology
    • /
    • v.15 no.2
    • /
    • pp.183-188
    • /
    • 1983
  • The viscoelastic behavior of traditional Korean noodles was examined by using a tensile tester built in the laboratory. The creep test of cooked noodle strand showed that a linear viscoelastic response could be expected for a short time of creep, i.e. 120 sec for wheat flour noodle and 60 sec for wheat-sweet potato starch noodle, with the stress range between $4{\times}10^4\;and\;14{\times}10^4\;dyn\;cm^{-2}$. The elastic modulus was estimated to be $7.0{\times}10^5\;dyn\;cm^{-2}$ for wheat flour noodle and $3.9{\times}10^5\;dyn\;cm^{-2}$ for wheat-sweet potato starch noodle. A peculiar increase in viscosity with increasing stress, i.e. stress-hardening, was observed in the noodles studied.

  • PDF