• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.4
• /
• pp.213-218
• /
• 2010

In this study, a star screen model was constructed to predict the dynamic characteristics of interactive waste particles and to simulate separation capability of the particle using geared type screen(star screen). In order to approach this model, it is necessary to determine the design parameters of the screen such as driving torque, percentage of open space, and capability. Thus, a dynamic star screen model was developed with a total of 32 columns of geared assembly including screen part, wastes guide, and extra joints to rotate the screen using ADAMS. Each parameter was simulated to predict the screening capability for particle size, rotating speed, and particle condition. From the results, separation ability was predicted according to the affecting variables by using the dynamic star screen model.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.1
• /
• pp.85.2-85.2
• /
• 2014

The origin of the Korean Screen Planisphere with both Traditional and New Star-Charts, made by Korean Astronomers in the Royal Astronomical Bureau of the Joseon Dynasty by adopting the knowledge of the European astronomy, is investigated by analyzing its inscriptions and star charts. The considerations on both the changes in notations or representations of names of asterisms and the naming taboos used in the Old-style planisphere imply that the star-chart is originated from either the Sukjong-Stele-Replica of Cheonsang-Yeolcha-Punyajido(天象列次分野之圖). The New style planisphere is just the reproduction of Huangdao-congxingtu (黃道總星圖), with the exception of the non-Chinese-traditional stars. The Huangdao-congxingtu was made in 1723 CE by Ignatius K$\ddot{o}$gler who was a Jesuit missionary and worked for the Bureau of Astronomy (欽天監) in the Qing Dyansty. I find that the star chart was imported in 1742 CE from the Qing by An Gukrin (安國麟) who was an astronomer in the Royal Astronomical Bureau of Joseon. The chart became model for the screen star-chart made in 1743 CE and now housed in Bopju temple. I found that the inscriptions are extracted from the sentences in both Xinzhi Lingtai Yixiangzhi (新製靈臺儀象志) and Qinding Yixiangkaocheng (欽定儀象考成). Korean historical records in either Daily Records of the Royal Secretariat of the Joseon Dynasty (承政院日記) or Annals of the Joseonn Dynasty (朝鮮王朝實錄) show that Xinzhi Lingtai-Yixiangzhi was imported from the Qing Dynasty in 1708 CE, and the Qinding Yixiangkaocheng was imported in 1766 CE. Thus, the Korean Screen Planisphere with both Old and New Star-charts was certainly made after 1766 CE.

• Current Optics and Photonics
• /
• v.8 no.1
• /
• pp.38-44
• /
• 2024

Under the influence of atmospheric turbulence, a star's point image will shake back and forth erratically, and after exposure the originally small star point will spread into a huge spot, which will affect the ground calibration of the star sensor. To analyze the impact of atmospheric turbulence on the positioning accuracy of the star's center of mass, this paper simulates the atmospheric turbulence phase screen using a method based on a sparse spectrum. It is added to the static-star-simulation device to study the transmission characteristics of atmospheric turbulence in star-point simulation, and to analyze the changes in star points under different atmospheric refractive-index structural constants. The simulation results show that the structure function of the atmospheric turbulence phase screen simulated by the sparse spectral method has an average error of 6.8% compared to the theoretical value, while the classical Fourier-transform method can have an error of up to 23% at low frequencies. By including a simulation in which the phase screen would cause errors in the center-of-mass position of the star point, 100 consecutive images are selected and the average drift variance is obtained for each turbulence scenario; The stronger the turbulence, the larger the drift variance. This study can provide a basis for subsequent improvement of the ground-calibration accuracy of a star sensitizer, and for analyzing and evaluating the effect of atmospheric turbulence on the beam.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.4
• /
• pp.219-224
• /
• 2010

Recycling issue for the construction wastes is gradually important to future society. Recently, a star screen has been developed to use for this purpose, however some modifications were needed to enhance the separation accuracy. The objective of study is to evaluate and predict separation ability by verifying the effect for the modified shapes of the screen part. Two analysis models of the screen part were established using commercial software ADAMS to simulate the dynamic interaction of waste particles. Results showed that spacer and gear shapes directly affected separation ability. The modified spacer shapes were much higher screening rate with comparison to default shape. Screening ability for the half number of gear type was greater than other types. Therefore, modification of the design of screen part will be required to achieve better separation ability.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.7
• /
• pp.102-109
• /
• 1994

Low cost high efficiency single crystal silicon solar cells for terrestrial applications have been fabricated by using inexpensive materials such as solar grade silicon wafer and pastes, and mass production processes such as screen printing and spray. Under 100 mW/cm$^2$ (AM 1.5) and $25^{\circ}C$ conditions conversion efficiency of 16.48% was obtained by anon fire-thru process and 15.55% by fire-thru process.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.625-626
• /
• 2009

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.1
• /
• pp.149-158
• /
• 1987

This paper describes the SEAS which is a 2-dimensional graphic editor for schematic circuit and IC mask layout. This system runs on general purpose computer and Tektronix 4110 series graphic terminal. With this system, user can edit schematic circuits and/or IC mask layout with 2 level hierarchy. This system supports more than 20 kinds of built-in symbol, user definable internal symbols, 60 macros, 16 function keys, 4 level on-screen menu operation and edit-in-place of cell in main drawing. And it provides editing functions such as reflection, rotation, move and copy of one or a group of elements, and modification of polygona geometry etc. To improve the excution speed, we used local memory of graphic terminal. For the portability of the program, the system is written in FORTRAN 77 programming language.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.635-636
• /
• 2009

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1065-1066
• /
• 2008

Printed thin-film transistors (TFTs) have received profound interests as an alternative to their silicon counterparts for use in fabricating next-Gen microelectronics by virtue of projected low manufacturing cost and certain salient features (e.g., thin and lightweight characteristics, structural flexibility, etc.) that printed TFTs bring to device architecture. The economic advantages stem from engaging low-cost printing techniques (e.g., screen printing, gravure, flexography, etc.) for deposition and patterning in place of traditionally costly high-vacuum, high-temperature photolithographic processes. To render printing TFTs possible, solution processable materials are necessary.

• Physical Therapy Rehabilitation Science
• /
• v.6 no.4
• /
• pp.182-188
• /
• 2017

Objective: The purpose of this study was to compare ankle function between adults with and without Down syndrome (DS). Design: Cross-sectional study. Methods: Ten adults with DS and 18 without participated in this study and underwent manual muscle test (MMT), range of motion (ROM) assessment, star excursion balance test (SEBT), and functional movement screen (FMS). The tests were demonstrated to increase their accuracy and the actual measurements were assessed after one or two demonstrations. To minimize the standby time and fatigue, the travelled distance and measuring order were adjusted. To remove the influence of shoes on the measurements, the shoes were taken off and only socks were worn. Results: Dorsal and plantar flexion MMTs of both ankles were significantly weaker and plantar flexion ROM of both ankles were significantly lower in adults with DS compared with those without (p<0.05). However, dorsal flexion ROM of both ankles were not significantly different between them. There were significant differences in distances measured in all the directions (anterior, anterolateral, lateral, posterolateral, posterior, posteromedial, medial, and anteromedial directions) of SEBT (p<0.05). Significant differences were also demonstrated in the scores of hurdle step, inline lunge, shoulder mobility, and rotary stability among the seven items of FMS (p<0.05). Conclusions: To enhance the dynamic stability of adults with DS, it is necessary to improve ankle stability by strengthening the ankle dorsal and plantar flexors.