• 한국해안해양공학회:학술대회논문집
• /
• 한국해안해양공학회 1995년도 정기학술강연회 발표논문 초록집
• /
• pp.120-121
• /
• 1995

In the design of mixed type breakwater, the most important factor to be considered is the wave pressure. In particular, the standing wave pressure has a significant effect on the vertical wall breakwater or mixed type breakwater. Many wave pressure formulas were developed and the Goda's formula［1］ was very frequently used among them by the coastal engineers due to its simplicity and accuracy. (omitted)

• Journal of information and communication convergence engineering
• /
• 제7권3호
• /
• pp.263-267
• /
• 2009

Cylindrical monopole antenna is one of most promising candidates for multi-band applications such as PCS, WLAN, DMB, and UWB wireless services. In this research, we demonstrate that there exist two types of current distributions according to the exciting frequency in a double band cylindrical monopole antenna, in which double resonance is achieved by adjusting the coupling structure of the antenna base. The operating modes of current distributions are identified from CST software simulations, the standing wave mode in a lower band and the traveling wave mode in a higher band. Also it is noticed that the mode behavior is quite similar to a helical antenna, a standing-wave (resonance) mode and a traveling-wave (non-resonance) mode according to the electrical dimensions of antenna. The effective ranges for operating modes and design formulas of the double band antenna are derived from simulation and measured results.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 춘계학술대회
• /
• pp.135-138
• /
• 2009

Cylindrical monopole antenna is one of most promising candidates for multi-band applications such as PCS, WLAN, DMB, and UWB wireless services. In this research, we analyze the current distributions of operating modes for a cylindrical double-resonant monopole antenna. Two modes, the standing wave mode in a lower band and the traveling wave mode in a higher band, are identified from CST software simulations. Finally, design formulas are derived form the simulation results.

• 대한토목학회논문집
• /
• 제14권6호
• /
• pp.1445-1451
• /
• 1994

해안구조물에 작용하는 설계파압(設計波壓)을 수치적으로 계산하기 위해서는 먼저 쇄파한계(碎波限界)에 가까운 큰 중복파랑을 수치적으로 재현할 필요가 있다. 이를 위해서는 지배방정식(支配方程式)과 비선형항(非線形項)을 포함하는 경계조건을 효과적으로 반영해야 하며 특히, 자유표면(自由表面) 경계조건(境界條件)에서의 속도의 제곱항의 처리가 중요하다. 본 연구에서는 Newton 방법을 이용하여 제곱항을 충실히 반영하므로써 일반적인 셜계파 성향에 거의 상응하는 중복파랑을 재현하였으며 기존의 섭동법(攝動法) 또는 Fourier 전개 기법 및 수리실험 결과와 비교하여 그 정확도를 검토하였다.

• Journal of Biosystems Engineering
• /
• 제37권2호
• /
• pp.113-121
• /
• 2012

Purpose: Particle separation in solution is one of important process in a unit operation as well as in an extract preparation for biosensors. Contrary to centrifuge-type of mesh-type filter, using an ultrasonic standing wave make the filtering process continuous and free from maintenance. It is needed to investigate the characteristics of particle movement in the ultrasonic standing wave field. Methods: Through the computer simulation the effects of major design and driving parameters on the alignment characteristics of particles were investigated, and a cylindrical chamber with up-stream flow type was devised using two circular-shape PZTs on both sides of the chamber, one for transmitting ultrasonic wave and the other for just reflecting it. Then, the system performance was experimentally investigated as well. Results: The speed of a particle to reach pressure-node plane increased as the acoustic pressure and size of particle increased. The maximum allowable up-stream flow rate could be calculated as well. As expected, exact numbers of pressure-node planes were well formed at specific locations according to the wavelength of ultrasonic wave. As the driving frequency of PZT got close to its resonance frequency, the bands of particles were observed clearer, which meant the particles were trapped into narrower space. Higher excitation voltages to the PZT produced a greater acoustic force with which to trap particles in the pressure-node planes, so that the particles gathered could move upwards without disturbing their alignments even at a higher inlet flow rate. Conclusions: This research showed the feasibility of particle separation in solution in the continuous way by an ultrasonic standing wave. Further study is needed to develop a device to collect or harvest those separated particles.

• 한국음향학회지
• /
• 제20권8호
• /
• pp.38-43
• /
• 2001

본 연구에서는 정재파를 이용하여 양방향 구동이 가능한 새로운 형태의 초음파 리니어 모터를 개발하였다. 이론적으로 모터의 작동 구조를 도출한 다음, 유한요소법을 이용하여 모터의 구체적인 구조를 설계하였다. 위 결과를 바탕으로 초음파 리니어 모터 시험편과 구동회로를 제작하여 구동실험을 행함으로써, 본 연구에서 제안한 새로운 구조의 타당성을 확인하였다.

• 한국해양공학회지
• /
• 제28권3호
• /
• pp.227-235
• /
• 2014

Using a 3-D numerical scheme (LES-WASS-3D) that considered wave-structure-sandy seabed interactions in a 3-D wave field, we analyzed the wave reflection and hydraulic characteristics inside a slit caisson with two chambers in a 3-D oblique wave field. To verify the 3-D numerical analysis method suggested in this study, we compared the numerical results with existing experimental results and found good agreement. The numerical analysis revealed that a standing wave field is generated on the front side of the slit caisson due to the effect of wave reflection. For incident waves propagating perpendicular to the slit caisson, the nodes and anti-nodes of the standing wave are apparent and symmetrical. However, in an oblique wave field, as the incident wave angle decreases, the nodes and anti-nodes of the standing wave become ambiguous and unsymmetrical. It was also found that the wave reflection coefficient decreases as the incident wave angle decreases. It can be pointed out that as the incident wave angle decreases, the turbulent intensity in the chamber increases. Thereby, the increased wave energy dissipation by the increased turbulent intensity reduces the rate of wave reflection. In addition, a strong turbulent intensity generally occurs in the first chamber.

• 한국전기전자재료학회논문지
• /
• 제13권4호
• /
• pp.280-285
• /
• 2000

The conventional ultrasonic linear motors developed so far utilize a standing wave and are of a pi-type or a hybrid transducer type structure. Traveling wave type bi-direction linear motors have not been developed yet. This paper describes design of a new bi-directional ultrasonic linear motor working by means of a traveling wave. With the finite element method we design and verify validity of the new structure. And we determine its optimal structure size of design variables material and boundary conditions for proper generation of the traveling wave.

• Korean Chemical Engineering Research
• /
• 제43권3호
• /
• pp.360-365
• /
• 2005

SMB는 연속 크로마토그래피 공정으로써 회분식 크로마토그래피보다 이동상의 소비를 줄이고 높은 농도, 높은 수율의 생산성의 장점을 가지고 있다. 그러나 운전상의 복잡성 때문에 이 공정을 이해하기 어렵다. 본 실험에서는 서로 다른 색깔을 지닌 두 물질의 분리를 시도함으로써 공정의 이해를 용이하게 하였다. 실험에서 사용된 물질은 Blue dextran과 Orange G로서 각각 파란색과 오렌지 색을 띤다. 실험은 4개의 존으로 구성된 SMB로써 zone VI에서 zone I으로 재순환 되지 않는 열린 루프계가 적용되었다. 운전 조건은 Standing wave design를 이용하였으며 extract와 raffinate에서 높은 순도와 수율을 가질 수 있도록 디자인하였다. 단일 칼럼을 이용한 실험을 통해서 여러 유량에서 비선형 흡착 평형식과 실험식으로부터 물질전달계수를 얻었다. Extract와 raffinate의 농도분포 곡선은 모사 결과와 거의 일치하였다. Extract와 raffinate의 순도는 99.49％와 98.89％이며 두 물질의 수율은 모두 98％였다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권12호
• /
• pp.573-577
• /
• 2002

We designed wideband HTS antennas which consists of two triangle -radiation patches using a $YBa_2Cu_3O_{7-X}$ (YBCO) superconducting thin film. The major limitation of high-Tc superconducting (HTS) microstrip antennas is the narrow bandwidth due to the high Q and thin substrate. Defining bandwidth as the frequency range over which standing wave ratio (SWR) 2:1 or less, HTS antenna bandwidths are typically 0.85 % to 1.1 %. Thus considerable effort has been focused on developing antennas for broadband operation. To calculate input impedance and design of the broadband HTS antennas a moment method technique was used. The HTS antenna fabricated in this work was designed for K-band, which is useful band for satellite to satellite communications. The bandwidth obtained was a significant 6.7 % and the other measured performance of our HTS antenna, including the bandwidth, radiation Pattern, efficiency, standing wave ratio (SWR) and return losses was reported.