• Journal of Advanced Navigation Technology
• /
• v.15 no.5
• /
• pp.687-695
• /
• 2011

The defect caused by the software industry that is the source of knowledge-centric, information-centric and technology-centric affects an engine which operate a major role for operation of aircraft. Therefore, we should minimize the danger from the defect by strengthening the stability of aviation through the stability analysis of software. In this paper, we examine the laws and systems about the aircraft defects and software safety and propose the enhancement and the enactment of the law or measures to strengthen aviation safety. We should the existing law or system as items, such as the revision related to the safety analysis, standards of quality assurance including safety, application of quality assurance that you must attach the safety analysis report, assessment of detailed instructions of certification authorities. In addition, we should enact the new law and system as items such as the mandatory software evaluation and certification, continuous assessment based on the software life cycle, mandatory introduction of a standardized development methodology, strengthening of advanced workforce system. We can expect the improvement of software quality and an enhanced aviation safety by improving existing laws or systems and enacting new laws or systems.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.4
• /
• pp.341-353
• /
• 2016

Purpose: The most important factor in longevity studies of dental prostheses is objective and consistent evaluation of the prosthesis. The Korean Academy of Prosthodontics suggested developing a standardized method for longevity studies of dental prostheses. The purpose of this study is to evaluate previously-used criteria and to develop new criteria, in the form of a procedure flowchart and an evaluation sheet. These new criteria may be able to provide a unified standard for future longevity studies of dental prostheses. Materials and methods: A literature review was performed about the evaluation of dental prostheses. Taking into account the strengths and weaknesses of previously used criteria, a novel, intuitive and objective method was developed for assessment of dental prostheses. Then, a pilot survey was performed with the newly developed flowchart and evaluation sheet to determine problems and implement possible improvements. Results: Thirty cases of fixed dental prosthesis (FDP), 25 cases of removable dental prosthesis (RDP), and 13 cases of implant supported prosthesis (ISP) were evaluated. The average life expectancy estimate was 12.82 years for FDP, 5.96 years for RDP, and 4.82 years for ISP with Kaplan-Meier survival analysis. Additionally, possible improvements discovered by the pilot survey were reflected in the flowchart and evaluation sheet. Conclusion: The newly developed KAP criteria, flowchart and evaluation sheet enabled objective and consistent results in trial longevity studies of dental prostheses. It is expected that future studies will not only use the KAP criteria but also further improvement will be made on them.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.715-721
• /
• 2018

This study examined energy saving and elevating the worker's neuro energy (comfort, concentration, physical, and psychological stability) by compensating for the unpleasant tactile sensation to stimulate auditory and olfactory senses and reduce energy consumption. The experiment was conducted in an environment test room under the test conditions of temperature $25[^{\circ}C]$, relative humidity 50[RH%], illumination 1,000[lux] and air current speed 0.02[m/sec] by stimulating the auditory senses with a 1/f change in rhythm and the olfactory senses with an aroma scent. The experiment utilized the method of EEG, which evaluates human body's psychological status via tactile means, and the method of the vibra image, which evaluates the learning abilities, HRV and human body's psychological status via non-tactile means. The subjects were selected as eight university students (four males and four females) in their 20s, the type that have high relative ${\alpha}$(8~13[Hz]) activation in occipital lobe, which brings the highest level of mind stability and concentration, who had no difficulty in physical activities. The subjects' posture and physical activity was fixed to 1met - when the subjects are seated and relaxing in a comfortable environment - and their clothes condition was standardized as 0.7clo. As a result, the sentimental and psychological stability and concentration were the highest in the multisensory stimulation of jasmine scent and change rhythm of an a=1.106 sound source. In addition, under this condition, the relative $M{\alpha}$ and relative $M{\beta}$ increased by 70.49[%] and 89.72[%], respectively; the HRT decreased by 39.09[%]; and the fatigue and tension/anxiety decreased by 36.85[%] and 15.54[%], respectively.

• Quality Improvement in Health Care
• /
• v.5 no.1
• /
• pp.42-57
• /
• 1998

Background : It is increasing the concern for patient satisfaction as a customer information. This study was planned to investigate the activities related to patient satisfaction survey at the Korean hospitals. Methods : We performed the nationwide survey on 235 general hospitals by using the self-administrated checklist from Sep. 9 to Oct. 9, 1996. The response rate were 50.2%. We analyzed the descriptive statistics and chi-square test by SAS software on 118 hospitals. Results : First of all, 62.7% of study hospitals showed to conduct the patient satisfaction survey, and most of hospitals which did not conduct it had a plan to do it within 5 years. The reason that hospitals did not conduct satisfaction survey was due to a lack of administrator's interest or adequate questionnaire form. Second, the bigger, public and being more located in the big city or opened more than 10 years, the more hospitals conducted the patient satisfaction survey. Also, patient satisfaction survey was mainly handled by planning dept. or administrative team. Third, most hospitals had their own way of making questionnaires without proving reliability and validity. The results of the survey were applied to hospital management timely, and were mostly reported to top manager level. Most CEO concerned about the results of satisfaction survey. Fourth, the staffs in charge of survey had problems such as skill related to data analysis and development of questionnaire and they suggested that this problems could be solved through inducing the implementation of the survey results on hospital management, support for the development of standardized questionnaires and increasing the top manager's interests. Fifth, most questionnaires composed of lots of questioning items on hospital equipments and environment, and kindness of hospital employee to patients. Conclusions : Although this study had some limitations in generalization due to low response rate in big hospitals, it is meaningful to find the present state and the problems related to patient satisfaction survey of the general hospitals. We can conclude that there are increasing the concern for patient satisfaction survey among the hospitals nationwide, and it can be needed for technical support related to development of survey tool or method.

• Journal of the Society of Disaster Information
• /
• v.17 no.2
• /
• pp.365-374
• /
• 2021

Purpose: This study aims to study the reinforcement of the connection between the ordering agency and the in-house supplier's disaster reduction activity management system. Method: The requirements for the supplier strategy specified in the enterprise disaster management standard were identified, the application cases of agency A and supplier B were reviewed, and procedures for reinforcing the linkage of the disaster reduction activity management system were derived. Result: In order to clearly define the supplier strategy, which is a requirement of the enterprise disaster management standard, and to reinforce the linkage, it was studied that the procedure applied by the ordering agency and the supplier, and a standardized procedure for sharing the results produced by the procedure were necessary. Conclusion: Among the procedures for establishing a disaster reduction activity management system for in-house suppliers, an improvement plan was proposed to reinforce the linkage of important procedures, and the proposed contents and procedures were suggested to be reflected in the enterprise disaster management standards and related norms.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.21 no.1
• /
• pp.60-64
• /
• 2017

Purpose Westgard multi-rules application based on test quality improvement and commercialized international standard has been widely used in quality control. However, it is difficult to applicate the Westgard multi-rules in nuclear medicine in vitro tests due to the larger sample sizes and the simultaneous measurement of quality control material and patient sample. This study investigated the usefulness of Westgard multi-rules application in nuclear medicine in vitro tests. Materials and Methods A total of 282 systematic error multi-rules (22s, 101s) recorded in the samsung medical center computer system from January 2013 to June 2016 along with 117 cases of corrective measure record was analyzed. The Quality control implementation is recorded in Hospital information system were divided into 4 high-level areas including quality control material error, experimental procedural error, Kit lot number management error, and others. To prevent quality control material error, the existing method that each staff used their own method was changed. The staff who in charge of managing the quality control material was designated and daily consumption amount of every test was strictly controlled by one person. To prevent other errors, every test step was standardized so that the entire test procedures are identically implemented. Results The total quality control implementation was 117 cases; As a result, 62 quality control material errors were 62 cases, experimental process errors were 24 cases, Kit lot number control errors were 18 cases, and other errors were 13 cases. The quality control material error was corrected and could be used fresh materials within 2 days after thawing. The cases of systemic error were decreased to causes as quality control material error. The quality control materials were reduced above 10 vials to a monthly average. In addition, these errors of experimental processing and Kit lot number were improved by test standardization. Consequently, the cases of 101s and 22s in systematic error rules decreased at least 2 cases to a monthly average. Conclusion To confirm of systematic error through multi-rules application quickly, it is necessary to base on management of the QC material, target values and standard deviation. Moreover, in the event of a systematic error, it was found important to record measures based on test cause analysis. The experiment results are expected to contribute to internal quality control improvement and prompt and accurate result reporting through error recording and causal analysis based on Westgard multi-rules analysis.

• Journal of Animal Science and Technology
• /
• v.52 no.2
• /
• pp.83-90
• /
• 2010

Hanwoo proven bulls have been selected since 1987 and consequently contributed to farmers for the improvement of beef cattle in Korea. The demand for the quality beef production as well as higher production efficiency was erupted after early 2000 as relatively cheap imported beef released. Therefore the pressure on the reformation of selection index for Hanwoo proven bulls have been piled up to furnish with Hanwoo's competitive. A total of 734 progeny test data were analyzed to select traits and their weights in the selection index to meet the beef market requirement. Regression analysis with stepwise selection method was used to select proper trait and its weight for selection index. A series of computer simulation was carried out to compare the currently using selection index with the alternate two selection indices proposed in this study. New selection index using standardized breeding values of Loin eye Muscle Area (LMA), Backfat Thickness (BFT) and Marbling Score (MS) with weight ratio 1:-1:6 was proposed. Results showed higher performance in improving MS and BFT gain by 22% and 31% still holding 86%~89% of genetic gain achieved by current index in Carcass Weight (CW) and LMA when new selection index was fitted. Because, new index has little consideration for production cost, further research should be performed to build selection index including cost and income simultaneously.

• Analytical Science and Technology
• /
• v.24 no.6
• /
• pp.503-509
• /
• 2011

Specific surface area is becoming a very important factor when newly developed advanced nano-materials are evaluated. But there have been many differences in results when measuring specific surface areas, depending on the measuring equipments and analysis method. To verify the reliability of the specific surface area measurement device supplied within the country, Round Robin Test (RRT) has been done at 21 affiliated research institutes. As a result, it was found that several institute had problems in measuring of gas adsorption amount in measuring equipment, and this proved the need for certified reference material (CRM). Furthermore, it was also found that the results from BET analysis is easily swayed by the analyst's subjectivism, and the calculated results may differ up to 16% in case of CRM I depending on the selection range of BET analysis. So this showed that a standard guideline for BET constant C value and fitting correlation coefficient R is needed, to properly select range in BET analysis. The experience in RRT, distribution of CRM, and standardized procedure would result in improved reliability in industrial processes, and thus, would contribute to the quality management, the productivity improvement, the safety evaluation, and the new material development.

• Journal of radiological science and technology
• /
• v.7 no.1
• /
• pp.3-11
• /
• 1984

The major findings of this investigation on radiographic works in 125 medical institutions around Seoul and Kyung-Ki area, from March 1983 to February 1984, are summarized as follows. 1. The number of references provided on radiographic techniques were 3 to 5 in general hospitals (52.1%), in hospitals (58.5%), and clinics (44.5%), and only the 10.4% of general hospitals had 11 or more. 2. The relatively high percentages of 75.0% of general hospitals and 68.3% of hospitals have established the standardized radiographic methods for regions examined, but most clinics (61.1%) have not. 3. As a log system for the radiographic request, the method of "routine study, or all the x-ray examinations are marked as 0 on a printed form" was most commonly used by general hospitals (62.5%) and hospitals (51.2%), and "the doctors employ their own methods" in most clinics (44.6%). 4. In the 85.4% of general hospitals, the 68.3% of hospitals and the 38.9% of clinics, the data such as diagnosis, clinic history, purpose of x-ray examination were recorded on a radiographic request at all times, or at least in part. 5. On a scale of hardness and easiness of order of doctors, the greatest response was "fairly easy to understand", and the 37.5% of general hospitals responded as "sometimes hard". 6. In determining the standards for radiographic factors, the general hospitals (62.5%) and hospitals (65.9%) adapted mostly "a departmental check list", and the clinics (61.1%) used mainly "a personal decision". 7. In using the immobilizing devices, angligner, and radiographic accessories, the Percentages were high in general hospitals and hospitals on the one hand, and were low in clinics on the other. 8. A consideration with regard to the devices for an improvement of examination of the same patients was totally ignored by the 50.0% of clinics, the 26.8% of hospitals and the 20.8% of general hospitals. 9. The causes of re-examination were due largely to patients (33.6%), and followed proportionately by incorrect exposure (22.8%), errors in positioning (22.0%), film processing faults (9.2%), conditions of x-ray equipments (8.8%), and quality of x-ray films (3.6%). 10. The conference on radiography was conducted regularly or irregularly by the 87.5% of general hospitals, the 56.1% of hospitals, and the 27.7% of clinics, and the meeting was proceeded only by radiologic technologists.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.22
• /
• pp.10003-10008
• /
• 2014

Background: Cervical cancer has been a leading female cancer in Thailand for decades, and has been second to breast cancer after 2007. The Ministry of Public Health (MoPH) has provided opportunistic screening with Pap smears for more than 30 years. In 2002, the MoPH and the National Health Security Office provided countrywide systematic screening of cervical cancer to all Thai women aged 35-60 years under universal health care coverage insurance scheme at 5-year intervals. Objectives: This study characterized the cervical cancer incidence trends in Songkhla in southern Thailand using joinpoint and age period cohort (APC) analysis to observe the effect of cervical cancer screening activities in the past decades, and to project cervical cancer rates in the province, to 2030. Materials and Methods: Invasive and in situ cervical cancer cases were extracted from the Songkhla Cancer Registry from 1990 through 2010. Age standardized incidence rates were estimated. Trends in incidences were evaluated by joinpoint and APC regression models. The Norpred package was modified for R and was used to project the future trends to 2030 using the power of 5 function and cut trend method. Results: Cervical cancer incidence in Songkhla peaked around 1998-2000 and then dropped by -4.7% per year. APC analysis demonstrated that in situ tumors caused an increase in incidence in early ages, younger cohorts, and in later years of diagnosis. Conclusions: Both joinpoint and APC analysis give the same conclusion in continuation of a declining trend of cervical cancer to 2030 but with different rates and the predicted goal of ASR below 10 or even 5 per 100,000 women by 2030 would be achieved. Thus, maintenance and improvement of the screening program should be continued. Other population based cancer registries in Thailand should analyze their data to confirm the success of cervical cancer screening policy of Thailand.