• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.4
• /
• pp.19-25
• /
• 2018

At present, there are many companies that can produce modular housing. However, if the housing projects are conducted without design standards and principles, each company will supply housing according to its own design standards, resulting in a loss of opportunity to promote standardization at a national level. Korea's modular construction technology is still in its infancy, and there is a lack of MC design applications due to the limited construction market. In recent years, however, related R&D has been carried out by the Ministry of Land, Infrastructure and Transport in order to activate modular construction. As a result, test-beds for public rental housing are currently being built, and the public rental housing applied with the modular construction method is expected to spread in the near future. In this regard, this study seeks to promote more economical and efficient production and supply of modular housing. To this end, it investigates the current status of modular construction, analyzes the problems and proposes a serious of MC design standards as part of the design standardization and open system for modular housing industry to solve the problems.

• Archives of design research
• /
• v.16 no.1
• /
• pp.93-102
• /
• 2003

This thesis is a study for the standardization of the design of ginseng cultivating facility (also known as the sun off facility) for the improvement of farming environment. The core background of this study is to propose a basic study for introducing, for the first time, the modern ginseng cultivating facility that matches the position of korea as a main nation cultivating ginseng and to secure the production and quality value of Koryo Ginseng, which is a special world-level agricultural product of Korea, under the present WTO agricultural product open system. Right now, wood, rice straw, or vinyls, which are non-standardized or are for one-time use only are used. Therefore, as a concept of the design, 1 tried to revise the fact that these materials are being used to set up the facility repeatedly every year which is creating environmental pollution and wasting of our countries labor and resource. Concrete factors to be improved are as follows: First, standardization of the form and structure of mass production system; Second, introduction of new materials such as semi-permanent resin etc., for standardization of materials; 1 tried to make the above two factors into a shape based on a Korean image. As for the design, designed a standard unit model of the ginseng cultivation facility especially keeping in mind to design it so the facility can be freely connected and assembled according to the size and shape of the cultivation area.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.9
• /
• pp.101-109
• /
• 2013

Data quality management is extremely important. In this study, we proposed data standardization for effective quality management of enterprise-owned data about distributed goods and validated its effectiveness by case study. For the standardization of data, we designed data category and data dictionary. Additionally, we categorized data and identified its attributes for data category design, and we developed design process for data dictionary and built the dictionary of word, term, domain and code for data dictionary design. And then we proposed output documents which have to be written for data standardization. Proposed data standardization approach is validated its efficiency by quantitative and qualitative measurement. and as a result the data quality of the data standardization improved 24% and the data quality of the consistency of the data dictionary improved 7%.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.200-207
• /
• 2006

A new formal standardization methodology of the structural design document information is proposed in this paper. The standardization process is divided into three steps: pre-process of the collected sample document (CSD), construction of the document structure, and definition of the occurrence of each element in the document. During the pre-process, the detail document contents in the CSD are indexed with templates defined in this study, and the indexed CSD is translated into XML Schema (XSD) formal Afterwards the degree of confidences of all elements between the temporary standard document (TSD) and the translated CSD are calculated by using the XML schema matching algorithm; the TSD is then updated. This second step is repeated until all of the CSD are compared. In the final step, the common elements and unbounded elements are extracted by determining the occurrence of the temporary document elements, and the standardized document schema is exported in the XSD format. The case study dealing with the structural calculation documents show that the ,proposed methodology can be effectively used to build a XML -based information model of structural design documents.

• The Research Journal of the Costume Culture
• /
• v.5 no.3
• /
• pp.176-183
• /
• 1997

To develop the bodice pattern of the master size of the established size chart which was suggested in the former studies, the wearing experiment was practiced. According to the result, developed pattern design in this study boys\` bodily characteristics were reflected fully. And especially, New pattern design method was suggested at chest circumference, neck circumference, arm circumference, chest breadth, and center front line. The study results were put into the database in order to apply apparel CAD system, and they could be easily used in standardization work of design pattern.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.358-360
• /
• 1997

The train control and monitoring system(TCMS) is an on board computer system in railway vehicles performing the control, supervisory and diagnostic functions of the complete train. This system replaces a lot of hardwired relays and minimizes the necessaries vehicle wiring thus increasing the reliability of the train. In this paper, we proposed a software design technique of TCMS using CASE tool (SAO+). The TCMS functions are implemented in software easily programmed, using a functional block, graphic programming language. We applied the compressor air module to a case study.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2009.04a
• /
• pp.236-239
• /
• 2009

Since 1990s, we have achieved a certain level of success in standardization of design, construction, and material on housing and public buildings with the national-level promotion. A practical connecting device that can synthesize all the serial processes is required to maximize the effect of construction material standardization. However, desired outcome of the standardization is not achieved yet because these serial standards and notification practices are decided by each part of the process and some are congested. In this study, we aim to improve a general organizational system of Korean Industrial Standard (KS) which is the most fundamental tool for the standardization of construction materials moving from a conventional idea that the standard is only for the material and components producers to a concept that can also be shared by the designers and construction workers. To achieve this, we propose an improvement plan for the Korean Industrial Standard in the perspective of three-tier classification system.

• Journal of the Korean housing association
• /
• v.20 no.3
• /
• pp.59-67
• /
• 2009

Since 1990s, we have achieved a certain level of success in standardization of design, construction, and material on housing and public buildings with the national-level promotion. A practical connecting device that can synthesize all the serial processes is required to maximize the effect of construction material standardization. However, desired outcome of the standardization is not achieved yet because these serial standards and notification practices are decided by each part of the process and some are congested. In this study, we aim to improve a general organizational system of Korean Industrial Standard (KS) which is the most fundamental tool for the standardization of construction materials moving from a conventional idea that the standard is only for the material and components producers to a concept that can also be shared by the designers and construction workers. To achieve this, we propose an improvement plan for the Korean Industrial Standard in the perspective of three-tier classification system.

• Journal of Ocean Engineering and Technology
• /
• v.34 no.3
• /
• pp.208-216
• /
• 2020

The Integrated Offshore Standard Specification (IOSS) involves Korean shipyards, classification societies, research institutes, the Korean industrial society, engineering companies, and oil companies with the objective of reducing costs and risks without compromising safety in international offshore engineering procurement construction (EPC) projects using new standardized bulk components and qualification procedures. The activities of the IOSS include the analysis of the existing rules and regulations to achieve the best standardization, which is reflected in the best practices, and minimize the variables in regulations and rules. In addition, a standard inventory of shapes and dimensions, referred to as specifications, is proposed in the IOSS. In this paper, the aluminum tertiary standardization part (IOSS S102-1/2 S104: Specification for Structural Tertiary Design) is presented with the details of the procedures, background reviews, and cost-benefit analyses of the design and verification methods for standard designs in the IOSS standardization items. Based on the cost-benefit analysis, the application of standardized aluminum tertiary items to offshore projects has significant advantages in terms of maintenance and repair compared to the carbon steel tertiary items utilized in current industrial practices.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2008.04a
• /
• pp.241-244
• /
• 2008

This study focused on the checking of design guideline using concept of reference plane as a promoting tool in order to apply to practical affair in relation to material standardization in housing build. For this purpose, we above all defined the role of reference plane. After establishing structural type can correspond to planning module of building components and coordination condition, we did exemplicated the sub-detail of building components which be to detach according to design method using the concept of reference plane that be complexed with spacial territory and replace cycle of building component or material.