• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.8
• /
• pp.637-644
• /
• 2003

Airborne noise is one of the considerable environmental factors for navy ship personnel who should accomplish their tasks in restricted ship spaces against adverse health effect of noise. However, it is difficult to find studies on actual condition of airborne noise for navy ships. In this study, we measured airborne noise levels at 379 compartments of 33 Korean navy ships. Using the measured data, we presented mean values and their standard deviations of measured noise levels with factors of ship type, compartment category, and operation mode. Additionally, we evaluated the mean value and cumulative probability of airborne noise levels of compartments with those of the US navy ships. These results can be rationally used in making the proper airborne noise criteria of the navy ship for the future.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.20 no.1
• /
• pp.29-33
• /
• 1983

The loading condition, of a ship, especially a multi-purpose cargo carrier, in service, is often changed. Then, the prediction of natural frequency changes is necessary to provide measures for prevention of ship vibrations. In this paper a simplified method for the above purpose is presented. The bases of the method are analytical solutions for the lateral vibrations of uniform Timoshenko beams carrying a concentrated mass and the Dunkerley's formula. In this method a ship in the standard ballast condition is reduced to a uniform Timoshenko beam having same system parameters as those of the midship section. To investigate the validity of the proposed method, numerical calculations are carried out for a 46,000 DWT bulk carrier and compared with detailed calculations based on the finite difference method. Even in cases those the cargoes in a hold, length of which is about 13% of the ship's length, are reduced to a concentrated mass, the proposed method gives results of several percent differences from the detailed calculations up to the six-noded mode.

• Journal of Ocean Engineering and Technology
• /
• v.7 no.1
• /
• pp.56-61
• /
• 1993

Standard values in graphic porms are presented for the ratio of added wave resistance to the sun of added wave and wind resistances in head sea for three ship types, tanker, container ship and passenger ship. The effect of ship length on the ratio defined above is investigated for the three ship types. Obique sea added resistance is determined using wave direction reduction factor. The factor is obtained from model test results and cubic spline interpolation technique.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.2
• /
• pp.351-359
• /
• 2010

In this paper, we propose a transmission algorithm of the TLI protocol of the IEC 61162-4 standard to perform the e-Navigation on ship, and we design and implement the TLI protocol according to the proposed algorithm. The implemented protocol is a TCP/IP based protocol, and is a network protocol with the MAU and LNA components proposed in the IEC 61162-4 standard. In addition, it makes a data transmission over the network architecture based on client/server network model. In the implemented protocol, there are a communication between the MAU and the LNA in one host, and also a communication between the LNA and the LNA in each other hosts. In order to provide a variety of service in a host, every client host has a LNA and multiple MAUs. According to the standard specification and the proposed transmission algorithm, we designed and implemented the TLI protocol using object-oriented mechanism. We carried out the experiment under a simple network model similar to real ship environment, and confirmed that it successfully transmits and receives data between the hosts.

• Journal of the Society of Naval Architects of Korea
• /
• v.57 no.5
• /
• pp.262-270
• /
• 2020

An outdoor free-running model test system was designed for assessing ship maneuverability with test uncertainty. The test model was a surface combatant of tumblehome hull geometry. The straight forward tests were conducted first to obtain the relationship between the propeller revolution rate and advance speed. During the outdoor tests, the propeller revolution rate to achieve a certain Froude number condition was higher than that in the indoor free-running model tests. Turning circle and zigzag tests for evaluating ship maneuverability criteria were carried out at the propeller revolution rate determined by the straight forward test results. The random and systematic standard uncertainties of maneuvering criteria were obtained by repeated tests and comparison with the indoor free-running model test results, respectively. The test uncertainty was largely dominated by the systematic standard uncertainty, while the random standard uncertainty was small with good repeatability.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6B
• /
• pp.651-660
• /
• 2006

Although a harbor may be constructed with calmness in harbor in mind, which satisfies the design standard, it is frequently reported that the motion of moored ships disrupt the cargo handling. This is because of current design standard, which only deals with the wave height in the decision making process of cargo handling, and, now, a new kind of estimation method of operating ratio for calmness based on the motion of moored ship is in need. In this research, a computational method that analyses the harbor operation rate in harbor was put forward by considering the relation of allowable quantity of motion for cargo handling and the computation of the motion of moored ship at wharf by using moored ship motion analysis model. Here, a new estimetion method was applied at Onsan harbor, and it was compared with the current estimation method, and, then, the difference between the two methods was showed. The harbor operating ratio gained by a new method was dropped by 2~11% at ENE and NE directions when it was compared with the operating ratio based on the current design standard. However, when a harbor structure layout is to be designed, a harbor operating ratio test according to the wave height and a harbor operation rate test, which considers the motion of moored ship, are to be run side by side at a harbor designing process.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.3
• /
• pp.339-345
• /
• 2018

Sunrise and sunset times differ depending on location and date. Previous studies conveniently but monotonously applied day and night times set up. This research defined the daytime and nighttime while considering the time of twilight according to the date and the location of ship collision accidents. Classifying the frequency of ship collision accidents with this standard, we conducted a chi-squared test for the difference between daytime and nighttime. The frequencies of ship collision accidents according to daytime and nighttime was compared by season, month, and time, and all of them showed statistically significant differences. The highest number of daytime ship collisions was 11.6 %, in June, and nighttime collisions peaked at 13.7 %, in December. The most frequent hour for daytime ship collisions was 0700h-0800h, at 10.2 %, and nighttime collisions peaked between 0400h-0500h, at 16.9 %. It is clear that the criteria used in previous studies cited was applied without any theoretical basis and likely only for the convenience of the researchers. It was found that results depend on what criteria are applied to the same research data. This study shows that statistical analyses of marine accidents, traffic volume, and congestion density should be carried out quantitatively while considering daytime and nighttime hours for each particular location and date.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.4
• /
• pp.391-398
• /
• 2011

SHS(Ship-Handling Simulator) is virtual generation of vessel traffic situation under various environmental conditions. Recent, with the introduction of MSA(Maritime Safety Audit), SHS is being used as a key facility to determine the safety of navigation. However, the current audit techniques specified in the implementation guidance of MSA have been prepared by generalizing common procedures and evaluation methods used by institutions operating simulator systems. Therefore, they need to be reviewed and supplemented. This study analyzed the adequacy of current audit techniques based on the limitations and problems, then suggested the advanced scheme of SHS such as standardization of ship models, standard manoeuvring and evaluation method. The results of this research will contribute to improving the quantification and reliability of audit techniques used in the MSA as well as upgrading of the simulator system.

• Korean Journal of Computational Design and Engineering
• /
• v.10 no.5
• /
• pp.356-364
• /
• 2005

As a ritual of modern people is getting higher, the safety assessment of the structure related to people has become the most important part in the process of the design. Especially, in the case of a ship, as regulations about the safety of passengers and the pollution in the ocean are strictly reinforcing, the safety assessment has become the most important part in the process of the design. However, because the established safety assessment is mostly depend on the experienced theory, it is so difficult to assess the safety considering a lot of situations such as various ocean environments, the mistake of sailors and emergency situations. As the way to solve this problem, lately the study of the simulation using a computer has been processed. In this paper, we suggested network-based simulation system framework using HLA (High Level Architecture) among many kind of simulations to assess the safety of the ship. Because HLA has already become a standard of the future simulation system in the U.S. DoD(Department of Defense) and Korea army, we expect to raise the possibility in the future. In addition, because HLA makes a standard of documents and a reused component(Federate) of simulation(Federation) by OMT(Object Model Template) and RTI(Runtime Infrastructure), we expect that this study will be developing the safety assessment of ship as well as operation in warship and cooperation with another applications.

• Journal of Advanced Navigation Technology
• /
• v.23 no.5
• /
• pp.367-372
• /
• 2019

With the development of various IT technologies, data generated in the ship can be controlled through CAN communication, autonomous operation, and information provision in various situation. In addition, electronic navigation vessels with various functions have emerged, and navigation and communication equipment used in these vessels are mainly following the NMEA standard. Currently, NMEA-0183 is still mainly used, but more efficient multimedia transmission processing method is needed for multimedia transmission and USN equipment compatible using NMEA-2000 standard. Furthermore, Ethernet-based ship control is required. However, this paper proposes a multimedia transmission scheme to be smoothly linked with existing ship devices by utilizing CAN communication that can be easily used in the ship.