• 해양환경안전학회지
• /
• 제19권2호
• /
• pp.164-170
• /
• 2013

최근 선박 대형화 추세가 급격하게 진전된 반면 국내 무역항의 수역시설 조건은 과거와 동일하여 특정 항로에서의 해상교통 혼잡이 발생할 개연성이 매우 높다. 국내항의 해상교통혼잡도를 평가하기 위해 사용하는 표준 선박길이는 70 m로, 30년 전부터 현재까지 그대로 사용하고 있어 이에 대한 검토가 시급하다. 본 연구에서는 국내 Port-MIS 데이터베이스에 저장된 60,000여척 선박 주요 제원을 기반으로 선박 대형화 추세를 분석하고, 최근선박의 총톤수와 선박 길이와의 상관함수를 이용해 선박 대형화가 반영된 표준 선박길이를 제안하였다. 또한 최근 5년간 국내 무역항 이용 선박에 대한 톤수별 척수를 기초로 소형선을 제외한 누적 빈도수가 50 % 이상 차지하는 기준점을 도출해 국내항의 표준 선박길이를 제안하였고, 각 표준 선박길이는 국내 무역항의 특성을 고려하여 적용할 필요가 있다.

• 한국해양공학회지
• /
• 제33권5호
• /
• pp.479-485
• /
• 2019

As exhaust gas systems of ships become more complicated, it is necessary to calculate an accurate pressure loss at their design stage. If the dynamic loss coefficients of non-standard fittings mainly used in exhaust gas pipe (EGP) are well-documented, it would be possible to calculate precise pressure loss more readily than using the conventional method that analyzes the entire system. In the case of a ship's EGP, the flow rates and temperatures of exhaust gas are determined by engine specifications, and the range of the flow rate and temperature is limited according to operating conditions. In addition, as it is possible to define non-standard fittings frequently used in an EGP, a database can be easily constructed and effective. This paper illustrates effective parameters and analysis cases of several types of non-standard fittings mounted in ship EGPs. The analysis procedure proposed in this paper is verified using existing research results on HVAC fittings. The numerical procedure, which is minimally affected by manpower and grid, is established such that it can be applied at the industry level.

• 한국항해항만학회지
• /
• 제44권2호
• /
• pp.98-109
• /
• 2020

In recent years, there have been concerted efforts toward predicting ship maneuvering in shallow water since the majority of ship's accidents near harbors commonly occur in shallow and restricted waters. Enhancement of ship maneuverability at the design stage is crucial in ensuring that a ship navigates safely. However, though challenging, establishing the mathematical model of ship maneuvering motion is recognized as crucial toward accurately predicting the assessment of maneuverability. This paper focused on a study on sensitivity analysis of the hydrodynamic coefficients on the maneuverability prediction of KVLCC2 in shallow waters. Hydrodynamic coefficients at different water depths were estimated from the experimental results conducted in the square tank at Changwon National University (CWNU). The simulation of standard maneuvering of KVLLC2 in shallow waters was compared with the results of the Free Running Model Test (FRMT) in shallow waters from other institutes. Additionally the sensitivity analysis of all hydrodynamic coefficients was conducted by deviating each hydrodynamic derivative from the experimental results. The standard maneuvering parameters including turning tests and zig-zag maneuvers were conducted at different water depths and their effects on the standard maneuvering parameters were assessed to understand the importance of different derivatives in ship maneuvering in shallow waters.

• Journal of Ship and Ocean Technology
• /
• 제9권3호
• /
• pp.23-32
• /
• 2005

Ship STEP(Standard for the Exchange of Product Model Data) which is composed of AP 215 (Ship Arrangement), AP 216(Ship Hull Form), AP 218 (Ship Structure), has been developed more than last 10 years and it is now at the stage just before IS(International Standard). It is expected that ship STEP would be used for the seamless data exchange among various CAD/CAM/CAE systems of shipbuilding process. In this paper the huge and complicated data structure of ship STEP is briefly reviewed at the level of ARM(Application Reference Model) and some abstract test cases which will be included as part of the standards are introduced. Basically ship STEP has common data model to be used without losing compatibility among those three different ship AP's, and it is defined as the modeling framework. Typical cases of data exchange during shipbuilding process, such as hull form data exchange between design office and model basin, midship structure data between shipbuilding yard and classification society are reviewed and STEP physical data are generated using commercial geometric modeling kernel. Test cases of ship arrangement at initial design stage and hydrodynamic data of crude oil carrier are also included.

• 해양환경안전학회지
• /
• 제26권1호
• /
• pp.15-21
• /
• 2020

본 연구는 ISO19030 - 선체 및 프로펠러 성능 모니터링 방법을 실선 178 k 벌크선박에 적용한 결과에 관한 것이다. 최근 온실가스 저감 규정 대응과 해운 경쟁력 확보를 위해 에너지 저감 솔루션을 선박에 적용하려는 시도가 증가하고 있다. 하지만 정량적으로 선박 성능을 분석하기 쉽지 않아 에너지 저감 솔루션의 평가가 쉽지 않았다. 이러한 해운 산업의 요구에 따라 2016년 ISO19030이 표준화되어 선박 성능 분석을 정량화할 수 있는 기반이 마련되었다. 하지만 ISO19030에서 제안하는 환경 보정법은 각 날씨 영향을 고려한 보정이 아닌 정수(Calm Sea) 상태에서 운항한 데이터만 분석하는 방식이다. 이러한 분석 방식은 선박의 운항 구간에 따라 데이터가 필터링 되는 편차가 심하고 정확한 환경 보정을 하지 않아 6개월 이하의 분석은 신뢰하기 어렵다. 본 연구에서는 ISO19030을 실제 3척 선박 3년 이상 장기간 운항 데이터에 적용하였다. 적용 결과를 토대로 ISO19030 효용성과 한계점을 파악하고 ISO19030에서 제안하는 필터링 방식 대신 ISO15016의 파도 보정(STA-WAVE2)을 통해 성능 분석 방법을 개선하고자 한다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 Asia Navigation Conference
• /
• pp.230-239
• /
• 2006

The depth, width and alignment of fairway that are main port water facilities should be designed considering the various elements including particulars of design ships, weather and sea conditions around fairway and method of ship-handling. However not only the existing Japanese design standard for fairway and also those of other countries do not take into consideration of such kind of elements and no design standard is made by quantitative analysis. In this circumstance the new design standard (Approach Channels, A Guide for Design) depending on classified various elements and quantitative analysis was proposed in 1997 by PIANC and IAPH. But it was proved that calculated values according to this standard were unfounded and had some problems to output the discontinuous value by small difference of calculation condition because the each value fur each element was simply added. And also it is hard to apply this standard to the design of port water facilities in Japan because this [A Guide for Design] is the design standard for long channels in European port. The proposal of more reasonable Japanese standard will be expected by applying the study result of naval architecture and navigation and by the cooperation of ship operators to use fairway, naval architects to built ships and civil engineers to dredge fairway. The concept of a fairway in 'Design standard fur fairway in next generation' is defined as passage for approach channel) and traffic lane designated by light buoys as navigable water for safe navigation. In 'Design standard for fairway in next generation' depth, width and alignment are picked up among many design elements of a fairway. Design method for those elements is shown based on design ships and navigational environments. This standard shows the method of design for each dimension depending on characteristic on design ship and weather and sea condition. On the other hand, in case of existing fairway, it is possible to decide the size of ship and navigation criteria by opposite analysis.

• 한국CDE학회논문집
• /
• 제15권1호
• /
• pp.60-69
• /
• 2010

Outfitting systems in marine vessels have many kinds of standard parts. Ship CAD system should support the designers with an efficient tool for the modeling of outfitting parts such as pipes and valves. We develop a practical procedure for a part master model that combines ship CAD systems with the industrial standard. Part master or catalogue database of standard equipments is included in the database of ship CAD. The part master makes the associations of three dimensional modeling with the industrial standard. Moreover, it reflects the automatic modeling to maintain attributes that are disclosed in the entity of each part master in order to reduce the modeling time. Entity and attributes of pipe and valves are chosen from JIS(Japanese Industrial Standards) in order to explain the proposed procedure. Suggested procedure explains that three dimensional model of equipment is generated by parsing the pre-defined attributes after the entities of part masters is stored in database.

• 한국항해항만학회지
• /
• 제31권4호
• /
• pp.281-287
• /
• 2007

Human factors have been considered the primary reason of marine accidents. Especially, the collision between vessels is mostly mused by human behavior. However, there have not been many researches to clarify the reason of marine accidents mused by human factors quantitatively. In order to understand human factors and to enhance safe navigation systematically, using a full mission ship-handling simulator, we've investigated the characteristics of avoiding behavior taken by mariners. Further in order to apply the characteristics more widely and effectively, it's necessary to formulate the standard behavior for ship-handling in the condition of collision avoidance. Is this study, therefore, we intended to propose the concept to model the mariner's standard behavior on the handling of collision avoidance as the first step. As a result, we confirmed the contents of information processing in ship-handling that mariner's generally taking to avoid collision.

• 수산해양기술연구
• /
• 제51권4호
• /
• pp.504-511
• /
• 2015

In this paper, the results of evaluating the passenger comfort due to the standard deviation of acceleration in vertical and lateral direction regarding the ship response in irregular wave by ordinary strip method in regular wave and energy spectrum using linear superposition theory in order to evaluate the motion of experimental ship are as follows. According to the results of ship response, it was possible to find that, in order to reduce the motion of ship, a ship operating in bow sea was more stable than in quartering sea. In the results of analyzing the standard deviation of acceleration in vertical direction according to each component wave pattern, when there was a wave length of 56m and an average wave period of 6 sec, most of cases showed the peak value. And among them, the standard deviation was 0.35 which was the highest in head sea. And in case of lateral direction, the maximum value was shown in a wave length of 100m and an average wave period of 8 sec. And it was 0.16 in beam sea and ${\chi}=150^{\circ}$. In the evaluation of passenger comfort due to standard acceleration in vertical and lateral direction, it was 80% in head and bow sea. On the other hand, it was shown to be 15% in follow sea. Accordingly, when the expected wave height in a sea area where a training ship was intended to operate was known, it was possible to predict the routing of ship. And altering her course could reduce the passenger comfort by approximately 50%.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2017년도 추계학술대회
• /
• pp.32-33
• /
• 2017

As the era of e-navigation begins, the significance of harmonized collection, exchange, and integration of marine information conventional "ship-to-ship" and "ship-to-shore"/"shore-to-ship" has become more significant in ensuring safety and security at sea. This research aims to provide an internationally applicable list of Standard e-Navigation Phrases (SENP ) for communication in the e-Navigation environment, along with practical approaches to this. For this purpose, the importance of standardized communication phrases specific to e-Navigation will first be illustrated. In order to approach the e-Navigation phrases in a practical and pragmatic manner, means of compiling and processing authentic VHF linguistic data accumulated from one of the Korean ports, Ulsan, will be detailed. In addition, major outcomes to be considered in designing SENP will be suggested. Finally, future actions and a joint effort for the standardization of e-Navigation phrases among stakeholders will be sought.