• Korean Journal of Human Ecology
• /
• v.18 no.2
• /
• pp.431-439
• /
• 2009

This research aims to invest consumers' purchase behavior and preference of F/W season knit wear to prepare for basic data in producing competitive knit wear which can meet consumers' demands. The results are as follows: 1. Consumers in their twenties are largely purchasing their knit wear at bonded clothing shops, consumers in their thirties at outlet stores and consumers in their forties and fifties at department stores. As for preferred materials in knit wear, the twenties like 100% of cotton, the thirties mixed wool, and the forties and the fifties 100% of wool. Across all age groups, they prefer knit wear pattern with no figures, while they consider its design and color as important factors in purchasing F/W knit wear. 2. As for the wearing sensations of F/W knitwear of three age groups, there are not significant differences in other factors except a factor of 'jacket length'. 3. As for the fitting sensation about F/W knit wear, consumers with 'thin' somatotype feel high comfort in the factor of 'girth', while consumers with standard somatotype feel high satisfaction in the factor of 'length'.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.673-679
• /
• 2000

LNG Carriers are currently known as sole commercial means of shipping natural gas on the sea. They are designed to proven dangerous explosion for shipping a lot of gas over long distance. In this study. In this study, a scaled model chamber was made to investigate ventilation characteristics of the hood room in LNG carrier. Experimental study was performed in model using visualization equipments with laser apparatus and image intensifier CCD camera gated by an AOM controller Twelve different kinds of measuring area were selected as experimental condition. Instant simultaneous velocity vectors at whole field were measured by using 2-D PIV system which software adopts two-frame grey-level cross correlation algorithm. To look into stagnation area of hood room for LNG carrier, a three-dimensional numerical simulation with standard ${\kappa}-{\varepsilon}$ model was carried out by using PHOENICS for three kinds of Reynolds number, $6.5{\times}10^3$, $9.7{\times}10^3\;and\;1.29{\times}10^4$, based on the cavity inlet velocity and cavity height. The flow pattern showed the large scale counter-clockwise forced-vortex rotated at center area, small eddies at each corner and stagnation area located at left-back upper side of model.

• Journal of Biomedical Engineering Research
• /
• v.26 no.4
• /
• pp.199-205
• /
• 2005

When recording single-unit responses from neural systems, a common problem is the accurate detection of spikes (action potentials) in the presence of competing unwanted (noise) signals. While some sources of noise can be readily dealt with through filtering or 'template subtraction' techniques, other sources present a more difficult problem. In particular, noise components introduced by power supplies, which contain harmonics of the power-line frequency, can be particularly troublesome in that they can mimic the shape of the desired spikes. Thus, standard 'template subtraction' techniques or notch-filtering approaches are not appropriate. In this study, we propose the use of a novel template-subtraction scheme that involves estimating the power-line noise waveform and using cross-correlation techniques to subtract them from the recordings. This technique requires two key steps: (1) cross-correlation analysis of each recorded waveform extracts a robust representation of the power-line noise waveform and (2) a second level of cross-correlation to successfully subtract that representation from each recorded waveform. This paper describes this algorithm and provides examples of its implementation using actual recorded waveforms that are contaminated with these noise signals. An improvement (reduction) in the noise level is reported, as are suggestions for future implementation of this strategy.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.802-811
• /
• 1996

Farmers need alternatives for weed control due to the desire to reduce chemicals used in farming. However, conventional mechanical cultivation cannot selectively remove weeds located in the seedline between crop plants and there are no selective heribicides for some crop/weed situations. Since hand labor is costly , an automated weed control system could be feasible. A robotic weed control system can also reduce or eliminate the need for chemicals. Currently no such system exists for removing weeds located in the seedline between crop plants. The goal of this project is to build a real-time , machine vision weed control system that can detect crop and weed locations. remove weeds and thin crop plants. In order to accomplish this objective , a real-time robotic system was developed to identify and locate outdoor plants using machine vision technology, pattern recognition techniques, knowledge-based decision theory, and robotics. The prototype weed control system is composed f a real-time computer vision system, a uniform illumination device, and a precision chemical application system. The prototype system is mounted on the UC Davis Robotic Cultivator , which finds the center of the seedline of crop plants. Field tests showed that the robotic spraying system correctly targeted simulated weeds (metal coins of 2.54 cm diameter) with an average error of 0.78 cm and the standard deviation of 0.62cm.

• Journal of Biosystems Engineering
• /
• v.32 no.6
• /
• pp.422-429
• /
• 2007

To prevent deterioration of agricultural products during cold transportation, optimized temperature control is essential. Because the control of temperature and thermal uniformity of transported products are mainly governed by cooling air flow pattern in the transportation equipment, the accurate understanding and removal of appearance of stagnant air zone by poor ventilation is key to design of optimized cooling environment. The objectives of this study were to develop simulation model to predict the airflow and heat transfer phenomena in the cold container and to evaluate the effect of fan blowing velocity on the temperature level and uniformity of products using the CFD approach. Comparison of CFD prediction with PIV measurement showed that RSM turbulent model reveals the more reasonable results than standard $k-{\varepsilon}$ model. The increment of fan blowing velocity improved the temperature uniformity of product and reduced almost linearly the averaged temperature of product.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.2
• /
• pp.145-154
• /
• 2015

This study aims to identify the differences of body image when the stripe direction and width change of semi-tight skirt. The semi-tight skirt pattern was made using the standard size of a women in their 20s. 12 semi-tight skirt models combining 6 kinds of stripe directions and 2 kinds of stripe widths were made using CLO 3D virtual clothing system. The data was evaluated by 126 fashion design majors. The results were as follows; In accordance with the body image factor analysis of semi-tight skirt, three image factors were identified; whole body optical illusion, calf optical illusion and hip optical illusion. Among these factors, the whole body optical illusion factor is the most important factor. The body image depending on the stripe direction and width change of semi-tight skirt mostly showed the significant difference. In accordance with the analysis on the interaction effect of body image depending on the stripe direction and width change of semi-tight skirt, the whole body, calf and hip optical illusion factors showed the significance. The interaction of body image had independent influence on all factors of stripe direction and width. In particular, the interaction of stripe direction and width had the most significant influence on the whole body optical illusion.

• Tunnel and Underground Space
• /
• v.15 no.6 s.59
• /
• pp.441-451
• /
• 2005

It is the unavoidable problem that the RMR rock classification method has the uncertainty resulted from uncertain definition of measured value in RMR grade table, hence in this paper, the estimation of probability density function$(p{\cdot}d{\cdot}f)$ graph with the evaluation of continuos RMR and the Monte Carlo Simulation and statistic reasoning were carried out to evaluate the uncertainty quantitatively. Also, the modified RMR rock classification table was presented in order to apply the uncertainty of RMR to the practice, and then the design process of standard support pattern and the tunnel support material was proposed.

• Fashion & Textile Research Journal
• /
• v.6 no.5
• /
• pp.634-640
• /
• 2004

Nowadays, the use of apparel CAD system is important to the mass production of ready to wear. Especially, computer-based grading is the most important process to improve the fitness of clothes and to reduce the time needed to make various size pattern. The purpose of this study was to suggest a standard sizing system for high school boys' pants and to suggest a grading method according to the sizing systems. The subjects were 217 high school boys of 16 to 18 year-old. The size intervals of waist girth and hip girth were 3 cm and 4 cm respectively. The sizing system, which had frequencies more than 4%, was classified 8 cases. Among them, 71-92 and 71-88 size were the most frequent size and were adopted the basic size for the two types of grading. According to the sizing system, hand-made patterns were manufactured. By measure of the each part of the slacks, 4 size's new grading-rule patterns were developed by each size. This result will contribute to clothing fitness of consumer and the amount of production.

• Fashion & Textile Research Journal
• /
• v.14 no.1
• /
• pp.1-12
• /
• 2012

This research was analyzed regarding comparing features of expressions between clothes in movie, , and cyber clothes that were made by Marvelous Designer2 which is a design CAD. This research was studied to experiment an expressing possibility of clothes simulation software which was developed currently. Therefore, we picked clothes that are good at movement and detail in the movie. The dress theory of the renaissance which is the period background of movie, was considered and studied as pattern, silhouette, material, color, detail and animation. The movie's dresses are made with 3D virtual and compared so 3D virtual clothes's benefits and weaknesses can be analyzed. As a result, we found that 3D virtual dress can show the real movie's feature accordingly with current developed IT standard. This will assist a development in fashion industry and become a new indicator for 3D movie clothing.

• Korean Journal of Veterinary Research
• /
• v.32 no.4
• /
• pp.597-603
• /
• 1992

To elucidate the molecular genetical properties of the canine parvoviruses isolated from the diseased puppies in the regions of Kyunggi and Chungnam provinces, the replicative form (RF) DNA of four field isolates were compared with those of two attenuated vaccine strains and a reference strains of CPV by restriction endonuclease analysis (REA). REA by Hinf I showed that three CPV isolates except CPV-V15 had an identical banding pattern with two vaccine strains, one standard strain and feline panleukopenia virus (FPLV). In CPV-V15 strain the fourth fragment of DNA with 800 bp was deleted. REA by Bgl II and Pst I indicated that CPV-V15 and FPLV had a bigger second fragment than those of the other strains of CPV. Meanwhile REA by Bam HI revealed that all the field isolates and vaccine strains used in this experiment showed similar banding patterns.