• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.33-36
• /
• 2004

The current Korea bridge design specifications have no provisions about concrete Barrier. And there are no test results of registence strength of the concrete barrier at the vehicle collision sites. This paper reports experimental results of concrete barrier on bridge deck conctructed by standard drawing of SB5 grade. Eight specimens were tested under static test. The specimens are divided by two groups (D-series and B-series). D-series is to show failure pattern of bridge deck. B-series is to show failure pattern of concrete Barrier. The test results compared with calculation results using Yield-Line theory of AASHTO LRFD Bridge Design Specifications.

• Journal of electromagnetic engineering and science
• /
• v.8 no.1
• /
• pp.1-5
• /
• 2008

In this paper, a biconical type antenna is proposed for EMI test site validation above 1 GHz. To achieve broadband and omni-directional radiation patterns required by international standard(CISPR), the proposed antenna consists of general bicones with cylindrical loads and adopts side feeding method to minimize the influence on H-plane pattern due to feeding cable, balun, and connector. The radiation patterns of the fabricated antenna are measured and the results are compared with CISPR criteria and commercial antenna in our interest frequencies. Although the proposed antenna has a few problems in frequency range of 1 GHz to 2 GHz, it has relatively better performance than commercial antenna.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2002.04a
• /
• pp.86-90
• /
• 2002

A new concept of building, office-tel, had gone through many ups and downs after being introduced to our nation. However, it overcame all the problems and is now an important part of the rural construction. It showed new potential especially on 1998 by flexibly corresponding when the IMF crisis occurred causing a radical social/economical change. It played a crucial role on activating the depressed real estate business and flourished like never before. This study analyses the office-tel market change pattern and factors by time period and grasps the causal relationship and attempts to set a new standard to evaluate the social/economical role and value of the office-tel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.4
• /
• pp.726-736
• /
• 1997

The textual image compression by pattern matching is a coding scheme that exploits the correlations between patterns. When we compress the Hangul (Korean character) text by patern matching, the collerations between patterns may decrease due to randoem contacts between phonemes. Therefore in this paper we separate connected phonemes to exploit effectively the corrlation between patterns by inducting the amtch. In the process of sequation, we decide whether the patterns have vowel component or not, and then vowels connected with consonant ae separated. When we compare the proposed algorithm with the existing algorith, the compression ratio is increased by 1.3%-3.0% than PMS[5] in lossy mode, by 3.4%-9.1% in lossless mode than that of SPM[7] which is submitted to standard committe for second generation binary compression algorithm.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.946-949
• /
• 2005

In this paper, influence factors on dynamic properties of floor impact noise insulation materials are suggested. For this purpose measurements on the dynamic stiffness and the loss factor of resilient materials are carried out by Korea standard (KS F 2868) according to the change of density, thickness, design pattern, and composition of materials. As a result the values of dynamic stiffness was decreased at high density and thick thickness, and that of loss factor was increased at low density. For dynamic properties, the pattern of lattice and waffle type material is better than that of plat type, and the mixed composition of materials is better than the composition of double layer materials at same thickness.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.2
• /
• pp.109-116
• /
• 2005

In this paper, we investigate the visual and quantitative analysis at the same time with an electronic tongue(e-tongue) system using an array of ISE(ion-selective electrode). We apply the FCM(fuzzy c-means) algorithm combined with PCA(principal component analysis), which can be reduced multi-dimensional data to third-dimensional data, to classify data patterns detected by E-Tongue system. The proposed technique can be designed to solve the cluster centers and membership grade of patterns combined with the output results obtained by PCA method. According to the proposed technique, the membership grade of unknown pattern, which does not shown previously can be determined and analyzed visually. Conclusionally, the relationship between the standard patterns and unknown pattern can be easily analyzed. Throughout the experimental trials, the proposed technique has been confirmed using developed E-Tongue system.

• Structural Engineering and Mechanics
• /
• v.59 no.5
• /
• pp.795-802
• /
• 2016

Gas pipelines are types of structures that are highly susceptible to corrosion. Sometimes, the pipes are subjected to a thinning of the wall thickness at the inside or outside wall due to erosion/corrosion. Therefore, it is important to evaluate the strength of the pipes undergoing corrosion to maintain the integrity of the piping systems. The main purpose of this study is to understand failure aspects caused by degradation of metal due to corrosion through. The ASME standard offers a relationship for the yielding pressure of the corroded pipes which was compared with the finite element results. The results demonstrate to obtain accurate results, the ASME relationship is unreliable. Moreover, pitting corrosion must be considered critical more than of other types.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1132-1137
• /
• 2008

Automatic Operation based on ATO (Automatic Train Operation) is necessary for driverless Light Rail Transit business. When this kind of driverless LRT operation plan is made, TPS (Train Performance Simulation) is traditionally simulated at all-out mode and coasting mode based on manual operation. Commercial schedule speed equals to all-out speed minus $9{\sim}15%$ make-up margin. Coasting mode TPS simulation is also run at commercial schedule speed to calculate run time and energy consumption. But TPS based on manual operation should make an improvement on accuracy in case of driverless LRT operation Plan. In this paper, new fast mode TPS simulation using ATO pattern is proposed and show near actual ATO result. The actual ATO pattern can be accurately simulated with the introduction of 4 parameters such as commercial braking rate, jerk, station stop profile and grade converted distance. Normal mode TPS simulation for commercial schedule speed can be designed to have fast mode trip time plus 3 seconds/km margin recommended by korean standard LRT specification.

• ETRI Journal
• /
• v.43 no.2
• /
• pp.272-287
• /
• 2021

This article presents a multi-dimensional spatial pattern analysis of crime events in San Francisco. Our analysis includes the impact of spatial resolution on hotspot identification, temporal effects in crime spatial patterns, and relationships between various crime categories. In this work, crime prediction is viewed as a classification problem. When predictions for a particular category are made, a binary classification-based model is framed, and when all categories are considered for analysis, a multiclass model is formulated. The proposed crime-prediction model (HotBlock) utilizes spatiotemporal analysis for predicting crime in a fixed spatial region over a period of time. It is robust under variation of model parameters. HotBlock's results are compared with baseline real-world crime datasets. It is found that the proposed model outperforms the standard DeepCrime model in most cases.

• International journal of advanced smart convergence
• /
• v.10 no.2
• /
• pp.64-72
• /
• 2021

XML message brokers have a lot of importance because XML has become a practical standard for data exchange in many applications. Message brokers covered in this document store many users. This paper is a study of the processing of twig pattern queries in XML documents using branching node streams in XML message broker structures. This work is about query processing in XML documents, especially for query processing with XML twig patterns in the XML message broker structure and proposed a method to reduce query processing time when parsing documents with XML twig patterns by processing information. In this paper, the twig pattern query processing method of documents using the branching node stream removes the twigging value of the branch node that does not include the labeling value of the branch node stream when it receives a twig query from the client. In this paper, the leaf node discovery time can be reduced by reducing the navigation time of nodes in XML documents that are matched to leaf nodes in twig queries for client twig queries. Overall, the overall processing time to respond to queries is reduced, allowing for rapid question-answer processing.