• Journal of the Korean Institute of Gas
• /
• v.22 no.6
• /
• pp.59-64
• /
• 2018

As part of measures to reduce fine dust, the government is promoting a project to convert the fuel of Yard Tractors(YT, tractors operated at ports), from diesel to LNG (Liquefied Natural Gas). While a port having a small number of yard tractors, it is not proper to construct a stationary LNG fueling station and supply LNG to YT due to a problem of BOG (Boil off gas) generation. Therefore, it is necessary to make a regulation and a standard on mobile LNG YT refueling station installation and inspection as an alternative. In this study, we have investigated domestic and foreign mobile LNG refueling cases and refueling standards, including the USA and Europe. In addition, we have suggested the risk reduction method according to the cause after investigation of the cause of LNG accidents. And last, based on the proposed risk reduction measures, we have proposed an amendment to the Regulation of the Urban Gas Business Law in Korea. The proposed mobile LNG YT refueling amendment of the Regulation includes ; maintenance of the safety distance from the protection facility, installation of an interlock device to prevent refueling in places other than the authorized place, installation of the identification system through biometrics, separation of the tank lorry and tow vehicle before refueling, checking the wheel fixed status of tank lorry before refueling, construction of the impounding area, safety measures before, during and after refueling, etc. The safety standards proposed in this study could be used as a reference in establishing standards for mobile LNG vehicle refueling in the near future.

• Journal of the Korea Convergence Society
• /
• v.9 no.12
• /
• pp.175-180
• /
• 2018

In this study, CFRP was manufactured with the laminate angle of $45^{\circ}$. The specimen of TDCB bonded with the adhesive for structure was designed by CATIA and the analysis was progressed by using the finite element analysis program of ANSYS. This study model was designed on the basis of British industry and ISO standard and the configuration factor(m) was established with variable according to the angle of model configuration. As the study result of this paper, the maximum deformations at the specimens with the tapered angles of $4^{\circ}$ and $8^{\circ}$ become most as 12.628 mm and least as 12.352mm respectively. Also, the maximum equivalent stresses at the specimens with the tapered angles of $6^{\circ}$ and $8^{\circ}$ become most as 9210.3 MPa and least as 4800.5 MPa respectively. The damage data of TDCB structure with the laminate angle which was manufactured with CFRP could be secured through this study result. As the damage data of TDCB structure bonded with CFRP obtained on the basis of this study result are utilized, the esthetic sense can be shown by being grafted onto the machine or structure at real life.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.2
• /
• pp.101-108
• /
• 2019

This study is analysis of the utilization as a concrete fine aggregate on CGS, a by-product of Integrated coal gasification combined cycle(IGCC). That is, in KS F 2527 "Concrete aggregate," properties of 1~12times to CGS were evaluated, focusing on quality items corresponding to natural aggregate sand(NS) and melted slag aggregate sand(MS). As a result, the distribution of grain shape, safety and expansion were all satisfied with KS standards by physical properties, but the quality was unstable at 7~12times of water absorption ratio and absolute dry density. The particle size distribution was unstable due to asymmetry distribution of coarse particles, and particles were too thick for 7~12times. The passing ratio of 0.08mm sieve was also out of the KS standard at part factor of 7~12times, but chloride content, clay contents, coal and lignite were all satisfactory. Meanwhile, chemical composition was satisfactory except for $SO_3$ in 1~6times, and content and amount of harmful substances were all within the specified value except for F in 7~12times. As a result of SEM analysis, the surface quality and porosity were 7~12times more than 1~6times, and it was the quality was degraded. Therefore, it is necessary to reduce the quality deviation by using separate measures in order to utilize it as concrete aggregate in the future, and if it is premixed with fine quality aggregate, it will contribute positively to solve aggregate supply shortage and utilize circulation resources.

• The Journal of the Korea Contents Association
• /
• v.18 no.12
• /
• pp.639-645
• /
• 2018

The objective of this research was to compare the precision of scanning the digital abutment impression and gypsum model according to 3-dimensional superimposing different skills. There were made with the abutment impression and gypsum model of a maxillary 1st premolar, blue light scanner scanned to obtain the stereolithography (STL) file. After the same process was performed 10 more times without moving them on the scanner table about the abutment impression and gypsum model, respectively (n=11, per types). By superimposing the date of scanning the abutment impression and gypsum model used with no control and best-fit-alignment skills, 10 color-difference maps and root mean square (RMS) data were obtained. The independent t-test was performed to compare RMS data between the each other groups (${\alpha}=0.05$). In the scanning abutment impressions, $RMS{\pm}SD$ of no control, best-fit-alignment showed $6.86{\pm}0.94$, $5.04{\pm}0.24$. in the scanning gypsum model, $4.98{\pm}1.16$, $3.39{\pm}0.07$, all groups showed a significant difference (P<0.001). Trough the this study's result, not only best-fit-alignment but no control is used with digital dental computer-aided design/computer-aided manufacturing (CAD/CAM) research and clinical part.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.6
• /
• pp.40-53
• /
• 2018

In smart card data, movement of railway passengers appears in order of smart card terminal ID. The initial terminal ID holds information on the entering station's tag-in railway line, the final terminal ID the exit station tag-out railway line, and the middle terminal ID the transfer station tag subway line. During the past, when the metropolitan city rail consisted of three public corporations (Seoul Metro, Incheon Transit Corporation, and Korail), OD data was expressed in two metrics of initial and final smart card terminal ID. Recently, with the entrance of private corporations like Shinbundang Railroad Corporation, and UI Corporation, inclusion of entering transfer line terminal ID and exiting transfer line terminal ID as part of Chain OD has become standard. Exact route construction using Chain OD has thus become integral as basic data for revenue allocation amongst metropolitan railway transport corporations. Accordingly, path detection in railway networks has evolved to an optimal path detection problem using Chain OD, hence calling for a renewed solution method. This research proposes an optimal path detection method between the initial terminal ID and final terminal ID of Chain OD terminal IDs within the railway network. Here, private line transfer TagIn/Out must be reflected in optimal path detection using Chain OD. To achieve this, three types of link-based optimum path detection methods are applied in order of 1. node-link, 2. link-link, 3. link-node. The method proposed based on additional path costs is shown to satisfy the optimal conditions.

• Journal of vocational education research
• /
• v.35 no.4
• /
• pp.155-176
• /
• 2016

This study analyzed content of and recognition on occupations shown from Technology Home Economics textbooks of the high school elective subject having a higher connection with the career development capability for the occupational world as shown from a curriculum analysis. Hence, this study selected 3 kinds of high school Technology Home Economics textbooks with a higher share from 6 in the 2007 revised curriculum and analyzed a frequency by characteristic of occupational content and recognition on description of a occupation. Content analyzed by researchers was examined by 2 school teachers to ensure the validity and objectivity of research findings. Research findings show that there is a great deal of frequency difference in occupations suggested by publisher and unit in the Technology Home Economics subject. Also suggestion frequency of the occupational classification by level from Korean standard industrial classification did not correspond to an actual situation of employment. Occupation names suggested from textbooks occupied 3.3% of those by Korean Occupation Dictionary, showing a higher suggestion ratio at occupations preferred by adolescents. In the textbooks, occupations were suggested from reading materials, photos and illustrations more than from texts. Recognition on descriptions of occupations showed for the most part the neutral(82.8%) and the positive16.2%)', and there was no biased intention even from some negative cases(1.0%). Based on research findings, this research has significance in that it suggested things to be considered for teaching career development capability in the high school Technology Home Economics subject and need for cultivating teachers' specialty to understand occupations and instruct career development. It also suggested improvements to be required for a new curriculum textbook.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.6
• /
• pp.353-358
• /
• 2018

In this study, it is describe to an optimization analysis process for the weight reduction of the voltage converter in the electric vehicle charging systems. The optimization design is a technique that finds the optimal material distribution under a given material quantity constraint by combining the design sensitivity with the material properties and the mathematical optimization. Among the topology optimization, a lightweight design is performed by a solid isotropic material with penalization with simple formula and well-convergence. The lightweight design consists of three steps. As a first step, a finite element model for the basic design of the on-board voltage converter was constructed and static analysis was performed on the load. In the second step, the optimum shape is obtained for the lightweight by performing the topology optimization using the solid isotropic material with penalization applying the stiffness coefficient of the isotropic material to the static analysis result. As a final step, impact analysis was performed by applying a half-sinusoidal pulse shape impact load which satisfies the impact test standard of the vehicle-mounted part with respect to the optimum shape. In the topology optimization, the design domain was defined as the mounting bracket area, and the design technology was finally achieved by optimizing the mounting bracket to achieve a weight reduction of 20% over the basic design.

• Economic and Environmental Geology
• /
• v.53 no.6
• /
• pp.655-666
• /
• 2020

This study evaluated the characteristics of arsenic production in groundwater through microbial community analysis of groundwater contaminated with high arsenic in Haman area. Groundwater in Haman area is contaminated with arsenic in the range of 0-757.2 ㎍/L, which represents the highest arsenic contamination concentration reported in Korea as natural groundwater pollution source. Of the total 200 samples, 29 samples (14.5%) showed higher arsenic concentration than that of 10 ㎍/L, which is the standard for drinking water quality, and 8 samples (4%) found in wells with 80-100 m depth were above 50 ㎍/L. In addition, seven wells with arsenic concentration more than 100 ㎍/L located in the northern part of Haman. As a result of microbial community analysis for high arsenic-contaminated groundwater, the microbial community compositions were significantly different between each sample, and Proteobacteria was the most dominant phyla with an average of 61.5%. At the genus level, the Gallinonella genus was predominant with about 12.8% proportion, followed by the Acinetobacter and Methermicoccus genus with about 7.8 and 7.3%, respectively. It is expected that high arsenic groundwater in the study area was caused by a complex reaction of geochemical characteristics and biogeochemical processes. Therefore, it is expected that the constructed information on geochemical characteristics and microbial communities through this study could be used to identify the origin of high arsenic groundwater and the development of its controlling technology.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.1
• /
• pp.239-251
• /
• 2021

Traditional Chinese medicine has treated diseases and improved health in nature-based experience. Advanced nations began to be interested in naturopathic therapy in the late 19th century and it led China to research aromatherapy. This study searched previous researches related with aromatherapy and generally analyzed aroma oil, applied body parts, methods of use, and period of use. For research contents, scientific and society journals from 2000 to 2019 related with aromatherapy were searched in CNKI(www.cnki.com) and WANFANG DATE(www.wanfang.com). Finally, 30 papers were selected through 5-step qualitative evaluation and expert review and analyzed. Frequency and percentage(%) were calculated by means of the Excel 2013 Program and represented by a chart. The results of analyzing aromatherapy trends are as follows. All 30 papers were researched in the medical society. The most common symptom was irritation and anxiety that appeared in 13 papers. Lavender oil and bergamot oil were commonly used aroma oil. Commonly applied part and method were nose and nasal inhalation. For aroma oil associated with symptoms, lavender oil was the best in irritative, anxious, and negative emotion, depression, labor pain, sleep disorder, migraine, tension, and vomiting, pain, and fatigue after operation. Lemon, ginger, and peppermint oil was good for nausea. Based on the findings, this study derived applied body parts, methods of use, and period of use in aromatherapy. However, most aromatherapy was used for patients in the nursing and medical fields in the simple form of inhalation and local massage. This study will suggest a standard ground that aromatherapy is good for pain, colic pain, and tension in a short period but needs a long period for the efficacy of psychological and neurological symptoms.

• Journal of Gastric Cancer
• /
• v.21 no.2
• /
• pp.169-178
• /
• 2021

Purpose: The aim of this study was to investigate the oncologic safety and identify potential candidates for proximal gastrectomy (PG) in upper third advanced gastric cancer (AGC) and esophagogastric junction (EGJ) cancers. Materials and Methods: Among 5,665 patients who underwent gastrectomy for gastric adenocarcinoma between January 2011 and December 2017, 327 patients who underwent total gastrectomy with standard lymph node (LN) dissection for upper third AGC and Siewert type II EGJ cancers were enrolled. We analyzed the correlation between the metastatic rates of distal LNs (No. 4d, 5, 6, and 12a) around the lower part of the stomach and the clinicopathological characteristics. We identified subgroups with no metastasis to the distal LNs. Results: The metastatic rate of distal LNs in proximal AGC and Siewert type II EGJ cancers was 7.0% (23 of 327 patients). On multivariate analysis, pathological T stage (P=0.001), tumor size (P=0.043), and middle third invasion (P=0.003) were significantly associated with distal LN metastases. Pathological 'T2 stage' (n=88), or 'T3 stage with ≤5 cm tumor size' (n=87) showed no metastasis in distal LNs, regardless of middle third invasion. Pathological T3 stage with tumor size > 5 cm (n=61) and T4 stage (n=91) had metastasis in the distal LNs. Conclusions: In the upper third AGC and Siewert type II EGJ cancer, pathological T2 and small-sized T3 stage groups are possible candidates for PG in cases without distal LN metastasis. Further validation studies are required for clinical application.