• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.329-335
• /
• 2019

Reliability growth analysis was conducted for a guided weapons system. In the development phase, reliability management activities were continuously carried out by identifying failure modes and causes and analyzing faults found during the testing. The missile system consists of an all-up-round missile and a launcher, and the analysis was carried out according to the test results of each system. The test results for the all-up-round missile were obtained with discrete data, which were success and failure as a one-shot-device. The test results for the launcher were obtained with continuous data by operating the equipment continuously in the test. For each test result, the reliability growth model was applied to the Standard Gompertz model and the Crow-Extended model. The models were used to identify the growth analysis results of the test so far. It was also possible to predict the reliability growth results by assuming the future test results. The study results could be useful in achieving the desired reliability goal and in determining the number of tests. Then, the planned test will be confirmed and the growth analysis of the missile system will continuously be conducted.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.139-150
• /
• 2010

Recently, full-scale research about a passenger tube train system is being progressed as a next-generation transportation system in Korea in light of global green technology. The Korea Railroad Research Institute (KRRI) has commenced official research on the construction of a tube train system. In this paper, we studied various parameters of the tube train system such as the internal tube pressure, blockage ratio, and operating speed through computational analysis with a symmetric and elongated vehicle. This study was about the aerodynamic characteristics of a tube train that operated under standard atmospheric pressure (open field system, viz., ground) and in various internal tube environments (varying internal tube pressure, blockage ratio, and operating speed) with the same shape and operating speed. Under these conditions, the internal tube pressure was calculated when the energy efficiency had the same value as that of the open field train depending on various combinations of the operating speed and blockage ratio (the P-D relation). In addition, the dependence of the relation between the internal tube pressure and the blockage ratio (the P-${\beta}$ relation) was shown. Besides, the dependence of the relation between the total drag and the operating speed depending on various combinations of the blockage ratio and internal tube pressure (the D-V relation) was shown. Also, we compared the total (aerodynamic) drag of a train in the open field with the total drag of a train inside a tube. Then, we calculated the limit speed of the tube train, i.e., the maximum speed, for various internal tube pressures (the V-P relation) and the critical speed that leads to shock waves under various blockage ratios, which is related to the efficiency of the tube train (the critical V-${\beta}$ relation). Those results provide guidelines for the initial design and construction of a tube train system.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.477-481
• /
• 2004

High Quality CD, OAT audio requires that large amount of data. Currently, multi channel preference has been rapidly propagated among latest users. The MPEG(Moving Picture Expert Group) is provides data compression technology of sound and image system. The MPEG standard provides multi channel and 5.1 sounds, using the same audio algorithm as MPEG-l. And MPEG-2 audio is forward and backward compatible. The MDCT (Modified Discrete Cosine Transform) is a linear orthogonal lapped transform based on the idea of TDAC(Time Domain Aliasing Cancellation). In this paper, we proposed the micro-program type vector processor architecture a benefit in MDCT/IMDCT of MPEG-II AAC. And it's reduced operating coefficient by overlapped area to bind. To compare original algorithm with optimized algorithm that cosine coefficient reduced $0.5\%$multiply operating $0.098\%$ and add operating 80.58\%$. Algorithm test is used C-language then we designed hardware architecture of micro-programmed method that applied to optimized algorithm. This processor is 20MHz operation 5V.

• Korean Journal of Occupational Health Nursing
• /
• v.29 no.1
• /
• pp.78-87
• /
• 2020

Purpose: The purpose of this study was to identify the relationship between nursing error experience, coping behavior and job stress in operating room. Methods: A descriptive research design was used in this study. The participants were 228 operating room nurses in G city who surveyed between October 25 and November 25, 2017 using self-report questionnaires. The data were analyzed using IBM SPSS/WIN 24.0/AMOS WIN 24.0 Program, which determined frequency, percentage, mean, standard deviation, Pearson correlation coefficient, and structural equation model. Results: There were significant positive correlations between six sub-categories of nursing errors and job stress. We found negative correlations between coping behavior and job stress. There was a mediating effect of active coping between knowledge of nursing error and job stress. We found passive coping between inspection & monitoring related error and job stress. Conclusion: Study findings suggest that adequate education and the improvement in hospital environment and system should be required to reduce the nurses' job stress related to the patients' safety in operating room.

• Journal of Power Electronics
• /
• v.7 no.2
• /
• pp.146-158
• /
• 2007

A multi-pulse GTO based voltage source converter (VSC) topology together with a fundamental frequency switching mode of gate control is a mature technology being widely used in static synchronous compensators (STATCOMs). The present practice in utility/industry is to employ a high number of pulses in the STATCOM, preferably a 48-pulse along with matching components of magnetics for dynamic reactive power compensation, voltage regulation, etc. in electrical networks. With an increase in the pulse order, need of power electronic devices and inter-facing magnetic apparatus increases multi-fold to achieve a desired operating performance. In this paper, a competitive topology with a fewer number of devices and reduced magnetics is evolved to develop an 18-pulse, 2-level $\pm$ 100MVAR STATCOM in which a GTO-VSC device is operated at fundamental frequency switching gate control. The inter-facing magnetics topology is conceptualized in two stages and with this harmonics distortion in the network is minimized to permissible IEEE-519 standard limits. This compensator is modeled, designed and simulated by a SimPowerSystems tool box in MATLAB platform and is tested for voltage regulation and power factor correction in power systems. The operating characteristics corresponding to steady state and dynamic operating conditions show an acceptable performance.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.23 no.4
• /
• pp.16-36
• /
• 2024

This study, developed a dynamic hard shoulder running(HSR) algorithm that includes ending speed and minimum operation time in addition to the starting speed for HSR, and presented an operation plan. The first stage of the algorithm was red, which means vehicles are prohibited from HSR. The second stage is red/amber, in which drivers are notified of HSR, and operators are given time to check whether there is any obstacle to HSR. Stage 3 is green, which vehicles are permitted for HSR. Stage 4 is amber, in which a signal is given to drivers that the end of HSR is imminent. In addition, a minimum time is applied to green and red, but if congestion is severe, red is terminated early to prevent congestion from worsening. The upstream and downstream traffic flow is managed stably through main line ramp metering and lane number matching. The operating standard speed reflects the characteristics of vehicles and drivers, and based on simulation results, 7090 was selected as the optimal operating standard speed considering traffic flow and safety aspects. Therefore it is desirable to apply the travel time divided by the minimum speed of the HSR link as the minimum operating time in order to ensure continuity of traffic flow

• Korean Journal of Digital Imaging in Medicine
• /
• v.9 no.1
• /
• pp.17-19
• /
• 2007

This study applies in case of operating an exam using by the contrast order or inputting an order of a contrast media the exam of Radiology Department. It is developed for helping decision making as regards a process of an exam from reading the creatinine value automatically linked with Laboratory Information System. It can be confirmed by real-time information; therefore, the creditability of the information is able to be improved. We will create the base for Patient Monitoring System with the data from the side effect of the creatinine value and allergies. Decision Support System minimize the inconvenience and the riskiness of the given contrast medium for CT tests. We would like to improve medical services by providing a standard circumstance where patients are able to run tests safely and comfortably.

• The Journal of Society for e-Business Studies
• /
• v.8 no.1
• /
• pp.141-154
• /
• 2003

SOAP is a protocol used for information exchange in distributed computing environment and SOAP defines mechanisms for message transferring between distributed system and remote procedure call/response process. This SOAP is able to be used independently on hardware platforms and operating systems and program languages because it uses only a text-based XML for protocol. Therefore ebXML that is a standard for E-Commerce adopts SOAP for message exchange. In this paper, we implement XML Hub System using SOAP and apply on the system e-Procurement. By this XML Hub System we can more easily exchange messages for B2B. Accordingly we can manage and integrate a lots of business partners.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.165_166
• /
• 2009

A HTS(High Temperature Superconductor) Cable is regarded as the most underground power to respond higher power density delivery system. This paper discussed electrical characteristic and standards of HTS Cable system. Various HTS cable characteristics are examined[3-5], ad compared with XLPE cable characteristics on possible distribution system environment. HTS cable is required to stabilize thermal condition for superconducting status, possible improper operating condition which affects quench, unbalanced, and harmonics impacts are discussed. HTS cable is customer designed cable which shall be implemented in special requirement of power system, the standard origination process requires to establish a series of methodology including design manufacturing, testing and installation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.8
• /
• pp.42-49
• /
• 2012

Grid-connected photovoltaic generator system requires high performance PCS(Power Conditioning System) according to the standard of 'Distributed Generation Grid-Connected Technology Standards'. This paper presents the MPPT control method which improves output efficiency through fast tracking to the maximum power point of PV and a reduced self-excited vibration. Secondly, in this paper DVR function was applied to PCS to compensate the voltage sag frequently happening for a power system. The proposed PCS control is analyzed and compared to conventional PCS operating characteristic, the various insolation and loads, and voltage sag condition through PSIM tool. It proves the utility.