• Journal of the Society of Disaster Information
• /
• v.16 no.3
• /
• pp.421-429
• /
• 2020

Purpose: The purpose of this study is to present step-by-step countermeasures to prevent fires in sandwich panel warehouses and to enhance on-site fire response capabilities. Method: Interviews of firefighters related to fire sites, advice from fire experts, and experiments on protection performance were conducted to draw up measures for each element to strengthen on-site response capabilities. Result: The fire safety management checklist for warehouse fire safety managers and the installation standards for wall protection of sandwich panel warehouses are presented. In addition, Standard Operational Procedures(SOP) for fire application of sandwich panel warehouses were established for firefighters on-site. Conclusion: Through this study, step-by-step fire safety measures were established for preventing, protecting and suppressing fires in sandwich panel warehouses.

• The Journal of the Korea Contents Association
• /
• v.20 no.5
• /
• pp.609-622
• /
• 2020

With the development of society, the scale of the statute is not only increasing, but also the content is getting complicated. The scale of safety standards existing in the law is also increasing and specialized, making it difficult to integrate and manage to minimize conflicts or overlaps among safety standards. For the integrated management of safety standards, a technology that searches for and extracts safety standards in laws and regulations must first be secured. In this study, considering the limitations of time and manpower, a tool for automatic detection of safety standards is developed based on several specific cases. The safety standards classified in the previous studies and the safety standards announced by the Ministry of Interior and Safety were analyzed, and also statute information which includes safety standards extracted by the National Disaster Management Institute in 2018 was collected. After the collected laws were refined and morphological analysis was performed, a safety standard thesaurus was constructed and indexed to develop a safety standard search tool. When automatic search tools are routinely applied to find safety standards in the future, it is expected that these tools will help to solve overlapping or conflicting problems of complex safety standards.

• Journal of the Korean Society of Radiology
• /
• v.14 no.5
• /
• pp.563-575
• /
• 2020

The purpose of this study is to evaluate the activation characteristics that occur in a linear accelerator for container security inspection. In the computer simulation design, first, the targets consisted of a tungsten (Z=74) single material target and a tungsten (Z=74) and copper (Z=29) composite target. Second, the fan beam collimator was composed of a single material of lead (Z=82) and a composite material of tungsten (Z-74) and lead (Z=82) depending on the material. Final, the concrete in the room where the linear accelerator was located contained magnetite type and impurities. In the research method, first, the optical neutron flux was calculated using the MCNP6 code as a F4 Tally for the linear accelerator and structure. Second, the photoneutron flux calculated from the MCNP6 code was applied to FISPACT-II to evaluate the activation product. Final, the decommissioning evaluation was conducted through the specific activity of the activation product. As a result, first, it was the most common in photoneutron targets, followed by a collimator and a concrete 10 cm deep. Second, activation products were produced as by-products of W-181 in tungsten targets and collimator, and Co-60, Ni-63, Cs-134, Eu-152, Eu-154 nuclides in impurity-containing concrete. Final, it was found that the tungsten target satisfies the permissible concentration for self-disposal after 90 days upon decommissioning. These results could be confirmed that the photoneutron yield and degree of activation at 9 MeV energy were insignificant. However, it is thought that W-181 generated from the tungsten target and collimator of the linear accelerator may affect the exposure when disassembled for repair. Therefore, this study presents basic data on the management of activated parts of a linear accelerator for container security inspection. In addition, When decommissioning the linear accelerator for container security inspection, it is expected that it can be used to prove the standard that permissible concentration of self-disposal.

• Journal of the Korean Society of Safety
• /
• v.32 no.4
• /
• pp.79-88
• /
• 2017

The purpose of this study is to analyze the effects of personal, job, and health care characteristics of firefighters on musculoskeletal disorders (MSDs) and job stress. This survey was participated 591 firefighters in jeonnam and Busan city. The survey consisted of 1) personal, job, and health care characteristics measurement, 2) job stress measurement (KOSS, Korean Occupational Stress Scale), 3) musculoskeletal disorders symptoms mesurement. The analysis of the data was using SAS 9.1 Ver. The statistics analysis was performed the frequency, percentage, average, and standard deviation for each survey item. The Chi square analysis was performed to analyzed the effects of personal, job, and health care characteristics on MSDs and job stress. According to the results of the study on musculoskeletal disorders symptoms, 49.6% of the subjects perceived pain related to musculoskeletal diseases. The total score for job stress was 51.6 (SD 12.9), which was the highest 50% when compared to the Korean job stress standard (male). Age, department, work experience, working type, position, and sleeping time were found to affect musculoskeletal disorders and job stress.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.59 no.3
• /
• pp.11-19
• /
• 2017

The decision-making process is the act of finding the best solution among various alternatives through comparison between various criteria based on objectives of the project, evaluation standard, and conditions. However, in practice it is not easy to simply decide the optimum decision, especially for selecting malfunctioning reservoirs because no systematic evaluation criteria or standard assessment process are available. Therefore, this study adopted AHP method, which is a MCDM (multi-criteria decision making technique) to identify the malfunctioning reservoirs for efficient management of reservoirs. Important criteria of the selection of malfunctioning reservoirs and priority weights of each criteria were determined based on results of expert's survey under a stepwise hierarchical approach. The most important factor for the decision of malfunctioning reservoirs was obtained as Reservoir efficiency among the selected criteria including Reservoir efficiency decrease, Disaster Risk, Reservoir efficiency, Available water storage, Future water demand, Resident Needs. The AHP technique was applied on 11 reservoirs in Andong region to verify its applicability. Scoring method was applied for the comparison with the results of AHP method.

• Journal of Korea Water Resources Association
• /
• v.53 no.spc1
• /
• pp.755-764
• /
• 2020

In South Korea, 850 standard watersheds and 7,807 KRF catchment areas have been used as basic maps for water resources policy establishment, however it becomes necessary to set up new standard maps with a more appropriate scale for the integrated managements of surface water-groundwater as well as water quantity-quality in the era of integrated water management. Since groundwater has a slow flow velocity and also has 3-D flow properties compared to surface water, the sub-catchment size is more effective than the regional watershed for the evaluation of surface water-groundwater interaction. The KRF catchment area, which has averagely a smaller area than the standard watershed, is similar to the sub-catchment area that generally includes the first-order or second-order tributaries. Some KRF catchment areas, which are based on the surface reach, are too small or large in a wide plain or high mountain area. Therefore, it is necessary to revise the existing KRF area if being used as a unit area for integrated management of surface-water and groundwater. A unit watershed with a KRF area of about 5 to 15 ㎢ can be effective as a basic unit for water management of local government considering a tributary composition and the location of groundwater wells, and as well it can be used as a basic tool for water demand-supply evaluation, hydrological observation system establishment, judgment of groundwater permission through a total quantity management system, pollution assessment, and prioritizing water policy, and etc.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.11a
• /
• pp.232-233
• /
• 2013

Recently Korea has imported and executed Performance Based Design for the method to settle the dangerousness on outbreak of fire of high-rise building. The overseas country's PBD is autonomic but It is unable to carry out the essential role of PBD as the performance based design that based the code based design in the domestic. Also It occurs the problems that different the classification standard of building as dualisation between the building code and the fire services act. In this study, We have investigated overseas's cases for the PBD of high-rise building and have drawn the improvement direction & the problem of domestic's PBD by comparing and the analysing the domestic regulation.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.05a
• /
• pp.703-706
• /
• 2005

기상이변과 사회구조의 복잡화에 따라 재난의 유형이 다양화되고, 발생 빈도와 피해 규모가 증가함에 따라 정부는 안전관련 법령의 정비, 소방방재청의 신설 등 “국민이 편안한 안전사회”를 건설하기 위해 재난관련 각종 정책, 조직 및 정보시스템을 정비하고 있다. 본 연구는 범국가 차원에서 안전관리 관련 기관간 업무 및 유기적 연계와 정보 공동 활용을 위하여 국가안전관리정보시스템 구축시 이식성과 상호운용성 확보를 위한 기술참조모델과 표준프로파일을 설계한다.

• Journal of Korean Society of Disaster and Security
• /
• v.14 no.4
• /
• pp.29-36
• /
• 2021

Recently, due to climate change, the slope is increasing, and the risk of steep slope disasters such as the occurrence of slope collapse in the east coast and Busan region in 2019 and the Gokseong landslide in 2020 is increasing. Particularly, most national parks are made up of mountainous areas, and the risk of disasters on steep slopes is increasing. As the ground of the national park is aging and the weathering and jointing of the bedrock are accelerating due to climate change, the slope collapse and rockfall are increasing, and the annual number of visitors is increasing, it is necessary to manage steep slopes adjacent to multi-use facilities with many users. In this study, dangerous steep slopes that affect multi-use facilities in national parks were analyzed using GIS and verified through field surveys. As a process for extracting steep slopes adjacent to multi-use facilities in national parks, the slope was made in DEM and slopes of 34 degrees or higher were extracted. The difference between the maximum and minimum heights of the extracted slopes was used to confirm that the slopes met the standard for steep slopes, and the analysis of the slope direction was used to confirm whether it had an effect on the multi-use facilities. After that, precision aerial images and field photos were analyzed to finally identify risks at 4 sites, and field surveys were conducted. As a result of the field survey, all 4 sites were found to be steep slopes, 3 were graded D and 1 was graded C, so it was confirmed that management was required as a risk of collapse. All steep slopes extracted through GIS were found to be dangerous, so it is judged that the extraction of steep slopes through GIS would be appropriate.

• Journal of the Korea Safety Management & Science
• /
• v.21 no.2
• /
• pp.25-42
• /
• 2019

The government announced that it would ask the contractors not only the supplier but also the contractors to take the same responsibilities if they did not observe industrial accident safety measures from 2019. The semiconductor manufacturing process belongs to the representative disaster industry group in which the facility is directly located inside a closed space called clean room. According to previous studies, the semiconductor industry group used checklists for safety management of their suppliers. This study has developed a model for assessing suppliers by constructing a quantitative checklist item through the risk assessment methodology, laws and regulations. The evaluation model of the supplier set up through this study becomes the safety management standard in the semiconductor industry. Furthermore, it is applied to the partner companies in the operation of ISO 14001, 45001, I would like to apply it as a measure of performance management for CSR (Corporate Social Responsibility).