• Journal of Food Hygiene and Safety
• /
• v.14 no.3
• /
• pp.293-304
• /
• 1999

The purpose of this study was to evaluate the microbiological quality, and to assure the hygienic safety of the food production in the university food service facility located in Seoul in accordance with the Hazard Analysis Critical Control Point(HACCP) concepts. In the hygienic state assessment of kitchen, it has revealed that it was very important to remove water from the kitchen floor and to establish standard method for disinfection of cooking utensils. And foodservice workers were required to have training program for the safe handling of food and utensils since they did treat food without hygienic gloves. The kitchen layout had to be improved because the near distance of table with heating unit and shelf might cause the growth of microorganisms when prepared food was kept on the shelf. In terms of the timetemperature measurement and microbiological quality assessment during each of the food production phases, most of sengchae (raw vegetable dish) and namul (cooked vegetable dish) were treated within danger zone for food safeness ($5~60^{\circ}C$). It has shown that the microbiological quality of raw materials was very much inferior at the time of receiving based on the TPC($10^{5}~10^{7}$), coliform($10^{3}~1O^{6}$), which was not acceptable level(TPC:$10^{6}$, coliform:$10^{3}$) suggested by Solberg. Microbiological growth has increased in the both of sengchae and namul considerably during most of food production phase. Therefore, it is extremely important to reduce holding and serving time and to avoid treating food within the danger zone for food safeness. In addition, the prevention of cross-contamination during mixing the ingredients with improper equipments and with insanitary treatments by workers was also important to keep the food safety in this speciqic university foodservice facility.

• Journal of Korean Society of Transportation
• /
• v.35 no.5
• /
• pp.396-408
• /
• 2017

In Korea, the number of elderly has been increasing rapidly. So it is also expected that the economic activity and the trip frequency of the elderly will increase. On the other hand, elderly related accidents such as falls during walking are steadily increasing and the satisfaction about pedestrian environment of elderly is very low. In this paper, we found one of the reasons for these dissatisfaction in pedestrian facility, which is not considering the walking ability (about 75% of non-elderly person) of the elderly. So, we analyze the kinematic walking characteristics of the elderly with the motion analysis system, when the elderly use stairs. As a result of analysis of various walking variables, the current standard for stairway height in Korean law (18cm) requires excessive force to elderly so it was difficult for elderly to keep the balance of the body in ascending and descending walk of stairs. In this paper, we propose the stair design criteria through the cluster analysis of walking parameters reflecting the gait characteristics of the elderly. This change is not a big for non-elderly person, but it can promote more socioeconomic activities for the elderly.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.10
• /
• pp.901-908
• /
• 2009

We examine the processing method of the food wastewater to direct spray at living waste incinerator. The demoscale stoker system is used as a incineration facility. The results show that it brings effect on the reduction of nitrogen oxide ($NO_x$) concentration as well as the ammonia ($NH_3$) amount in SNCR (selective non-catalytic reduction) by the incineration of food wastewater which is containing a plentiful ammoniac nitrogen ($NH_3$-N). Furthermore, the stability of incineration facility and the extension of operation period is actualized as a improvement of clogging phenomenon on outer wall of water pipe as the 870~$950^{\circ}C$ maintain of exit temperature in a second combustor by spray of the food wastewater. The 26 items of air pollution matter of nitrogen oxide ($NO_x$), sulfur oxide ($SO_x$) and dioxin etc. are measured. The results show that it is under the value of allowable exhaust standard.

• Journal of Distribution Science
• /
• v.6 no.1
• /
• pp.47-62
• /
• 2008

Joining the WTO in 2001, China became a number of the global economic system. China succeeded in vying to host Beijing 2008 Olympic Games and World Expo 2010 Shanghai. It is China's honor and opportunity to have high economic growth in the coming future. In 2007, the total cost of public logistics decreased by 18.2% than 2006 to 4540.6 billion RMB, accounting for 18.4% of the GDP. So, China logistics is a huge industry and a growing market full of charm. The statistic ratios of China's logistics and growth trends show us it is an important issue to build and run an effective logistics system. However, research on China's logistics systems and supply chain is lacked. This study is focus on the logistic location strategy in China including the study of factories and warehouses geographic strategy concerned with SCM. The core of this study is to propose a New Multi-Facilities Location Decision Model. This study banded the revised gravity center, the standard single facility location decision model(Gravity Center Model) and the transportation model into a new Multi-Facilities Location Decision Model. In addition, this study suggested the gravity center of population, the gravity center of each industry, the location decision graded-list of each industry of china using the gravity center model and the revised gravity center model. The new Multi-Facilities Location Decision Model proposed in this study can be used to solve the location decision problem of more than two facilities. And it can be used in the fields such as the location decision of production facility and service facility, the location of distribution and logistics, the location of broadcast and satellite communications, the location of wireless communication tower and so on.

• Journal of Environmental Science International
• /
• v.27 no.2
• /
• pp.91-97
• /
• 2018

This study carried out first a component survey on the domestic waste shipped into a waste disposal facility in B city, and then heavy metal analysis of each component according to the SRF standards. Based on this, this study explored the problems with domestic waste and measures to improve them. The results are as follows. The result of the survey of physical components show that paper accounted for the largest proportion with 20.5 %~59.9 %, metals (including batteries) among incombustibles accounted for 0.0~8.3 %, other inorganic substances, glass and ceramics accounted for 0.0~43.7 % and 0.0 %~19.6 % respectively. However, the proportion of coated viny and plastics, which have high lead and cadmium content, was rather high with 2.9 %~30.9 %. This suggests the possibility that actual concentration of lead and cadmium within SRF is likely to be higher. Among the 15 components contained in the waste brought into the waste disposal facility, 10 components (food waste, textiles, vinyl, plastics, wood, rubber and leather, paper, metals, electronic substrates, and nail polish) were analyzed according to assay samples (approximately 0.1 g and 0.3 g). The result of analysis shows that the amount of Cd and Pb detected in coated vinyl for 0.109 g of assay sample was 98.6 mg/kg and 20.6 mg/kg respectively; 117.0 mg/kg and 29.0 mg/kg respectively for 0.313 g of assay sample. This is high contents exceeding the Cd standard. As for wooden component, the amount of Pb was 480.0 mg/kg for 0.3 g of assay sample. This suggests that there always exists the possibility of exceeding the exposure level of heavy metals (Cd and Pb) in SRF as long as coated wood and vinyl plastics with high contents of Pb and Cd are shipped into the waste disposal facility; and the local government and the residents need to work hard to improve the situation including development of the machine to sort electronic substrates and batteries for separate collection of the waste of coated vinyl and plastics within domestic waste.

• Korean Chemical Engineering Research
• /
• v.53 no.4
• /
• pp.496-502
• /
• 2015

Hydrocarbon dew point(HCDP), a property which is the most generally used for describing natural gas condensation, is a very important parameter of natural gas quality specifications. HCDP is strongly influenced by the concentration of the heavier hydrocarbon components, especially $C_6+$, so, along with compliance with gas quality specifications, build up of procedures for obtaining accurate HCDP is essential for gas transmission company, because hydrocarbon condensation present may cause serious operational and safety problems. This study has been carried out in an attempt to measure HCDP accurately by the automatic hydrocarbon dew point meter under the actual field conditions. Measured HCDP also has been compared with calculated HCDP using the composition determined by gas chromatograph and industry accepted equation of state at multiple pressures, along with the cricondentherm. The test results are 1) the automatic hydrocarbon dew point meter was able to measure stable HCDP continuously 2) the automatic hydrocarbon dew point meter has been performed reference measurement by pure propane with a known dew point from literature, and 3) A meaningful differences was observed when comparing the automatic hydrocarbon dew point meter and gas chromatograph results for synthetic standard gas mixtures and real gas mixtures.

• Journal of Environmental Health Sciences
• /
• v.47 no.5
• /
• pp.398-409
• /
• 2021

Background: The types and effects of hazardous pollutants in indoor air may vary depending on the characteristics of the sources and pollutants caused by physical and chemical properties of buildings, the influence of outdoor air, and the exposure and use characteristics of residents. Objectives: This study was conducted to provide basic data on the establish of indoor air quality management for different classes of public-use facilities by presenting the characteristics of concentration distribution of hazardous pollutants by different public-use facilities and the status of the excess proportion of exceeding standards. Methods: This study analyzed self-measurement data from public-use facilities taken from 2017 to 2019 A total of 133,525 facilities were surveyed. A total of 10 types of pollutants that have maintenance and recommended standards stipulated in the Indoor Air Quality Control Act from the Ministry of Environment were investigated. The excess proportion and the substances exceeding the criteria for each type of public-use facilities for these pollutants were investigated. Results: As a result of the analysis of the proportion of exceeding the standard for each type of public-use facility, the facilities with the highest excess proportion of the standards for each hazardous pollutant were: PM₁₀ in railway stations (8.93%), PM_2.5 in daycare centers (7.36%), CO₂ in bus terminals (2.37%), HCHO in postpartum care centers (4.11%), total airborne bacteria in daycare centers (0.69%), CO in museums (0.1%), NO₂ in postpartum care centers (1.15%), Rn in museums (0.78%), total volatile organic compounds in postpartum care centers (7.20%) and mold in daycare centers (1.44%). Conclusions: Although uncertainty may arise because this study is a result of self-measurement, it is considered that this study has significance for providing basic data on the establishment in the future of indoor air quality management measures customized for each type of public-use facility.

• Journal of Korean Society of Disaster and Security
• /
• v.14 no.3
• /
• pp.29-38
• /
• 2021

Riverfront facilities are river space facilities used by citizens for the rest and convenience. Recently, although the importance of efficient maintenance of riverfront facilities is increasing, damaging facilities cases are increasing due to frequent floods. Currently, the inspections and diagnosis of river space facilities are limited to the main flood control facilities. And the standards for the maintenance and management of the riverfront facilities are insufficient. Utilization survey, which is the standard for managing river space facilities, is also inefficient in terms of manpower consumption and economic feasibility. This study uses mobile big data to classify river usage and conducts a survey for usability of river facilities to derive economic evaluation for usage performance. In the future, if economical method system that considers safety, usability, and durability is conducted and demanding analysis for each convenience facility is evaluated, it is expected that the efficient maintenance of riverfront facilities is perfomed better and the use of rivers by citizens will further increase.

• Health Policy and Management
• /
• v.29 no.2
• /
• pp.195-205
• /
• 2019

Background: The food and food service influence the quality of life and the general health condition of older persons living in long-term care (LTC) facilities. Purchasing good food materials is a ground of good food service. In Korea, the residents in LTC facilities should pay for the cost of food materials and ingredients out of their pocket because it is not covered by LTC insurance. This study explored what factors affect the cost of food materials paid by LTC facility residents and which factor affects most. Methods: We used data from the study on out-of-pocket payment on national LTC insurance, which surveyed 1,552 family caregivers of older residents in LTC facilities. We applied conditional multi-level model, of which the first level represents the characteristics of care receivers and caregivers and its second level reflects those of LTC facilities. Results: We found that the facility residents with college-graduated family caregivers paid 11,545 Korean won more than those with less than elementary-graduated ones. However, the income level of family caregivers did not significantly affect the amount of the food material cost of the residents. The residents in privately owned, large, metropolitan-located facilities were likely to pay more than those in other types of facilities. The amount of the food material cost of the residents was mainly decided by the facility level factors rather than the characteristics of care recipients and their family caregivers (intra-class correlation=82%). Conclusion: These findings suggest that it might be effective to design a policy targeting facilities rather than residents in order to manage the cost of food materials of residents in LTC facilities. Setting a standard price for food materials in LTC facilities, like Japan, could be suggested as a feasible policy option. It needs to inform the choice of LTC users by providing comparable food material cost information. The staffing requirement of nutritionist also needs to be reviewed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.4
• /
• pp.391-398
• /
• 2011

SHS(Ship-Handling Simulator) is virtual generation of vessel traffic situation under various environmental conditions. Recent, with the introduction of MSA(Maritime Safety Audit), SHS is being used as a key facility to determine the safety of navigation. However, the current audit techniques specified in the implementation guidance of MSA have been prepared by generalizing common procedures and evaluation methods used by institutions operating simulator systems. Therefore, they need to be reviewed and supplemented. This study analyzed the adequacy of current audit techniques based on the limitations and problems, then suggested the advanced scheme of SHS such as standardization of ship models, standard manoeuvring and evaluation method. The results of this research will contribute to improving the quantification and reliability of audit techniques used in the MSA as well as upgrading of the simulator system.