• 대한인간공학회지
• /
• 제30권2호
• /
• pp.375-379
• /
• 2011

Objective: The aim of this paper is to introduce the Directive 2002/44/EC on the minimum health and safety requirements regarding the exposure of workers to the risks arising from vibration. Background: Human beings interact with machinery, and contact with vibration is commonplace. Unfortunately, continuous exposure to mechanical vibration can lead to physical injury. And standards are needed for identifying those at risk and for taking steps to mitigate the problem and reduce risk of injury. Method: The contents of the Directive were summarized and discussed, especially against its ISO counterparts. Results: The Directive deals with minimum safety and health prescriptions relative to workers' exposure to risks due to mechanical vibration. This directive specifies exposure limit values and action values. It also specifies employers' obligations with regard to determining and assessing risks, sets out the measures to be taken to reduce or avoid workers' exposure. Finally, it details how to make exposed workers aware of this issue. Conclusion: In spite of some limitations, it has recently been transcribed into all national laws of member States of European union. Application: The results of the paper might help to establish or update the domestic standards on vibration.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 봄 학술발표회 논문집
• /
• pp.177-184
• /
• 2004

Orthotropic steel deck bridge has much advantages such as the light deadweight, so the construction of orthotropic steel deck is profitable for the long-span bridges Although the system has a lot of merits, it happens some damages by the traffic density and the fatigue cracks of welding. The cross-connection of longitudinal rib and transversal rib is one of the weakest at the fatigue. The secondary stresses which are from the out-plane deformation of transversal rib and the torsion of longitudinal rib make the topical stress concentration phenomenon. The Bulkhead Plate for prevention of this stress concentration phenomenon was applied by changing the orthotropic steel deck of Williamsburg bridge in USA. But, it is principle that a Bulkhead Plate is not established in the domestic design standard. Therefore, it is estimated that the study for installation of Bulkhead Plate is needed. This study with considering these circumstances proves efficiency of Bulkhead Plate and will be presented optimal design details through finite element analysis according to change the geometrical of Bulkhead Plate and the cross-connection area of longitudinal and transversal rib

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.682-685
• /
• 2002

In this paper, we defined necessary operations and functional blocks of a multiplexer for 3-D video systems and present our multiplexer design. We adopted the ITU-T's recommendation(H.222.0) to define the operations and functions of the multiplexer and explained the data structures and details of the design for multiview image processing. The data structure of TS(Transport Stream) and PES (Packetized Elementary Stream) in ITU-T Recommendation H.222.0 does not fit our multiview image processing system, because this recommendation is fur wide scope of transmission of non-telephone signals. Therefore, we modified these TS and PES stream structures. The TS is modified to DSS(3D System Stream) and PES is modified to SPDU(DSS Program Data Unit). We constructed the multiplexer through these modified DSS and SPDU. The number of multiview image channels is nine, and the image class employed is MPEG-2 SD(Standard Definition) level which requires a bandwidth of 2∼6 Mbps. The required clock speed should be faster than 54(= 6 ${\times}$ 9)㎒ which is the outer interface clock speed. The inside part of the multiplexer requires a clock speed of only 1/8 of 54㎒, since the inside part of the multiplexer operates by the unit of byte. we used ALTERA Quartus II and the FPGA verification for the simulation.

• Journal of Computing Science and Engineering
• /
• 제11권2호
• /
• pp.49-57
• /
• 2017

This paper proposes a new IPv6 networking paradigm as a counter answer to the rationale for locator/identifier separation. Instead of involving separate number spaces each for node identifiers and locators, the context of the IP address as a node identifier alone is utilized and no additional locators are incorporated. That is, there are only node addresses and no locators, and location information is indirectly derived from neighbor relations between nodes. In order to accomplish this, no subnet IDs are utilized; the ID value is set to zero for all subnets. The paper details how to construct this paradigm through novel choice of operational policies in various IPv6 protocols and some trivial modifications. Especially, inherent provision of intra-domain node- as well as subnet-mobility by use of standard link-state intra-domain routing protocols is discussed. A number of important advantages of this paradigm over the canonical IPv6 networking and various known solutions of locator/identifier separation are discussed. Tailoring for multi-area domains and IPv4 is left for further study.

• Genomics & Informatics
• /
• 제18권2호
• /
• pp.16.1-16.5
• /
• 2020

There has been a dramatic increase in the popularity of utilizing social media data for research purposes within the biomedical community. In PubMed alone, there have been nearly 2,500 publication entries since 2014 that deal with analyzing social media data from Twitter and Reddit. However, the vast majority of those works do not share their code or data for replicating their studies. With minimal exceptions, the few that do, place the burden on the researcher to figure out how to fetch the data, how to best format their data, and how to create automatic and manual annotations on the acquired data. In order to address this pressing issue, we introduce the Social Media Mining Toolkit (SMMT), a suite of tools aimed to encapsulate the cumbersome details of acquiring, preprocessing, annotating and standardizing social media data. The purpose of our toolkit is for researchers to focus on answering research questions, and not the technical aspects of using social media data. By using a standard toolkit, researchers will be able to acquire, use, and release data in a consistent way that is transparent for everybody using the toolkit, hence, simplifying research reproducibility and accessibility in the social media domain.

• Bulletin of the Korean Chemical Society
• /
• 제26권12호
• /
• pp.1991-1995
• /
• 2005

Sensitivity factors of elements by a glow discharge mass spectrometry (GD-MS) were intensively investigated and compared with a laser ablation inductively coupled plasma-mass spectrometry (ICP-MS). In case of copper matrix, the sensitivity factor by GD-MS generally decreases with the increase of the mass number of element. The details are a little different between each data measured by Faraday and multiplier detectors. The factor by a multiplier detector drastically decreases with the mass increase in the region of low mass as in Faraday detector’s case, but slowly in the high mass region. On the contrast, the sensitivity factor of solution standard by a conventional ICP-MS slowly increases with the increase of elemental mass number even though there are some exceptions such as gold and also the sensitivity factor by a laser ablation ICP MS generally increases with mass number of element in the specimen of glass type. In case of steel matrix, any definite trends could not be shown in the relationship between the GD-MS’s sensitivity factor and elemental mass.

• 한국식물병리학회:학술대회논문집
• /
• 한국식물병리학회 2003년도 정기총회 및 추계학술발표회
• /
• pp.28-28
• /
• 2003

The International Committee for Taxonomy of Viruses (ICTV), which was formed over 30 years ago, aims to develop a single, universal taxonomic scheme for all viruses or, in other words, "the classification of viruses and the assignment of names to taxa". Plant Virus taxonomy is in charge of Plant Virus Subcommittee, a substructure of the ICTV. The ICTV has been most successfully pursuing that aim and its mammoth 'Seventh Report' records details of the names it has collated and approved, and of the classification, it has devised. The current 7th ICTV report published in 2000 contains plant viruses of 951 species in 79 genera in 17 families, though 24 of the 79 genera are floating genera, that is, they are not included in any established families. Proposed name of new or existing viruses are vote for the accepted taxonomic proposals by ICTV Executive Committee meeting. The approved results have been published as the ICTV reports providing standard names and taxa of viruses all over the world. A number of new plant viruses have been identified or reclassified in the genus or species level, and new genera and families have been proposed.(중략)

• International Journal of Fluid Machinery and Systems
• /
• 제6권3호
• /
• pp.137-143
• /
• 2013

To improve annular jet pump (AJP) performance, new ways named constant rate of velocity/pressure change method (CRVC/CRPC) were adopted to design its diffuser. The design formulas were derived according to the assumption of linear velocity/pressure variation in the diffuser. Based on the two-dimensional numerical simulations, the effect of the diffuser profile and the included angle on the pump performance and the internal flow details has been analyzed. The predicted results of the RNG k-epsilon turbulence model show a better agreement with the experiment data than that of the standard and the realizable k-epsilon turbulence models. The AJP with the CRPC diffuser produces a linear pressure increase in the CRPC diffuser as expected. The AJP with CRPC/CRVC diffuser has better performance when the diffuser included angle is greater or the diffuser length is shorter. Therefore, the AJP with CRPC/CRVC diffuser is suitable for applications requiring space limitation and weight restriction.

• Journal of Periodontal and Implant Science
• /
• 제23권1호
• /
• pp.193-200
• /
• 1993

The purpose of this study is to investigate the relationship between occurrence and inducing factors of herpes labialis developed after periodontal therapy and to suggest prediction model of this lesion. A total of 100 patients were studied. A standard schedule was used for interviews of patients. It included demographic information, patient and familial history of recurrent aphthous ulcer and recurrent herpes labialis, history of systemic disease, religion, and emotional state. In case of female patients, the association of dysmenorrhea and onset of recurrent herpes labialis was also observed. After periodontal therapy, some details about therapy, such as the kind of therapy, location, spending time were recorded. At next appointment, the appearance and location of herpes labialis were examined. The frequency of herpes labialis after periodontal therapy was 8% and the location was predominantly mouth angle. The significant relationship was found between the onset of herpes labialis and the history of recurrent herpes labialis, surgical therapy rather than non-surgical therapy, and spending time. The prediction model of herpes labialis was not apparently established with the results of this study. In conclusion it is suggested that we should minimize traumatic manipulation and treatment time to prevent the onset of herpes labialis after periodontal therapy.

• 한국강구조학회 논문집
• /
• 제22권1호
• /
• pp.99-108
• /
• 2010

본 연구는 구조상세설계와 모델링 단계에서 활용 가능한 철골 접합부 모델링 자동화 모듈의 개발을 목적으로 한다. 이를 위해 접합부의 구조해석 결과를 3D 모델링의 입력 변수와 표준접합상세지침을 고려하여 라이브러리 D/B로 구축하였다. 구축된 라이브러리 D/B를 접합부 3D 모델링 단계에서 활용하기 위하여 상용 S/W에서 제공하는 OpenAPI 함수를 이용하여 접합부 자동 생성 모듈을 개발하였다. 개발된 모듈을 검증하기 위해 6층 규모의 철골 오피스 구조물을 대상으로 접합부 모델링을 수행하였으며, 접합부 모델링 과정에 대해 기존 프로세스와 연구 프로세스의 비교를 통해 적용성과 효율성을 검증하였다.