• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.1057-1062
• /
• 2000

The purpose of this study is to practice the method which can estimate 28-days strength of concrete in advance. This method is made for reliant quality control. Based on existing experiment, concrete that flyash added and normal concrete are placed into wall structure, and it is examined the difference between experiment use concrete and field use concrete. The result of this study are as follows : 1) Core test specimen have 10% lower strength to standard curing specimen. 2) At 28-days accelerated strength by microwave, average 35% in normal concrete, average 23% in flyash added concrete. 3) At coefficient of determination between compressive strength and accelerated strength, 0.84 in normal concrete core, 0.86 in standard curing normal concrete, 0.86 in flyash added concrete, 0.90 in standard curing flyash added concrete.

• 한국연초학회지
• /
• 제25권1호
• /
• pp.27-33
• /
• 2003

This study was conducted to determine the changes of nitrogen compounds in lamina and midrib during the curing process with the different curing methods, such as priming and stalk-cut curing. After KB 108 burley tobacco was cultivated by the different fetilization levels such as standard and 20% higher, only the tips and leaf were harvested. Though the contents of total alkaloid and total nitrogen were similar in lamina, midrib showed a very low contents of those components by the different curing method and fertilization levels. The content of nitrate-nitrogen in lamina increased during a middle of curing process, and then these compound was decreased during an end of curing process by stalk-cut curing method. Nitrate-nitrogen contents in the lamina by the priming curing showed a high level caused by rapid drying process during an end of curing process. That component in midrib was 5-6 times higher than that of lamina. The contents of ammonia-nitrogen in the lamina and midrib were increased during a curing process. Though those amount in tips showed a similar by a different fetilization and curing method, midrib of stalk-cut curing showed a slow increasing during a curing process.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 봄 학술발표회 논문집
• /
• pp.107-111
• /
• 1996

The testing specimens were made from the standard mix proportion according to those of domestic PC factories to establish a basic data for the Accelerated Curing Effect. The experimental tests were conducted according to the conditions of each sub-curing periods. By comparing the results of compression tests on de-molded and 28-day water-curing specimens, we find that the most effective curing condition to obtain more than the required design strength after 28 days of water curing may be as follwings; the presteaming period does not affect seriously and less than $30^{\circ}C$/hr-the rate of temperature rise and less than $82^{\circ}C$ - maximum temperature are necessary. It seems that post-curing procedure is very important factor to increase the effect of accelerated curing.

• 콘크리트학회지
• /
• 제7권2호
• /
• pp.155-164
• /
• 1995

본 연구는 증기양생을 실시하는공장제품을 대상으로 석고계 고강도콘크리트용 혼화재를 사용하여 콘크리트를 고강도화하는데 그 목적이 있다. 목표 슬럼프는 원심력 성형제품을 대상으로 슬럼프 $6{\pm}1cm$가 되도록 고성능감수제로 조절하였으며, 아울러 양생방법에 다른 고강도콘크리트용 혼화재를 사용한 콘크리트의 강도발현 특성을 검토하고자 증기 및 수중양생을 실시 비교하였다. 실험결로부터 고강도 콘크리트용 혼화재는 증기양생이 효과적이며 압축강도 발현은 단위결합재량 $530{\sim}600kg/m^3$의 조건에서 10%치환으로 무치환에 비하여 1.3배 증가된 $650kgf/cm^2$ 이상, 15-30% 치환시 1.4-1.5배 증가된 $700kgf/cm^2$이상을 얻었다. 따라서 고강도콘크리트용 혼화재는 증기양생시의 고강도콘크리트 제조에 효과적으로, 시멘트2차제품 제조에 오오토클레브 양생을 하지 않고 증기양생만으로 고강도콘크리트를 얻을 수 있는 유효한 혼화재임을 나타냈다.

• 농업과학연구
• /
• 제8권2호
• /
• pp.185-194
• /
• 1981

본(本) 연구(硏究)는 촉진양생(促進養生)이 Mortar 압축강도와 인장강도에 미치는 영향과 시멘트 : 연탄재 Mortar에 미치는 영향을 연구(硏究)하기 위하여 시멘트 : 표준사, 시멘트 : 연탄재를 배합비(配合比) 1 : 2, 1 : 3, 1 : 4의 3종류(種類)로 하고 $20^{\circ}C$의 기준양생분(基準養生分)과 촉진온도(促進溫度)를 $60^{\circ}C$, $80^{\circ}C$, $100^{\circ}C$의 3 종류(種類)로 구분(區分)하고, ${\sigma}_3$, ${\sigma}_7$, ${\sigma}_28$의 압축(壓縮) 및 인장강도(引張强度)시험을 실시(實施)하였으며 본시험(本試驗)의 결과(結果)를 요약(要約)하면 다음과 같다. 1.압축(壓縮)과 인장강도(引張强度)에서 시멘트 : 표준사(標準砂)가 시멘트 : 연탄재보다 각재령(各材令), 각온도(各溫度)에서 강도(强度)는 현저히 크게 나타났으나 강도(强度)의 증가율(增加率)은 시멘트 : 연탄재가 시멘트 : 표준사보다 각재령(各材令)과 각온도(各溫度)에서 크게 나타났다. 2. 압축(壓縮)과 인장강도(引張强度)에서 KS 규정치(規定値) 하(下) 회(廻)하던 것이 촉진양생(促進養生)의 온도상승(溫度上昇)으로 규정치(規定値)를 상회(上廻)하게 된 것은 촉진양생(促進養生)에 의한 강도(强度)의 증가(增加)라고 생각되며 촉진양생(促進養生)에 의한 강도(强度)의 증가율(增加率)이 부배합(富配合)보다 빈배합(貧配合)에서 크게 나타난 것은 빈배합(貧配合)일수록 촉진양생(促進養生)에 의한 경화작용(硬化作用)이 더 활발(活潑)히 진행(進行)된다는 것을 예측(豫測)할수 있다. 3. 시멘트 모르터에서 잔골재를 연탄재로 대치(代置)했을 때 강도저하는 불득기(不得己)한 것이지만 시멘트 : 연탄재의 ${\sigma}_28$의 강도(强度)를 $20^{\circ}C$에서 100%로 보았을 때 촉진양생온도(促進養生溫度) $600^{\circ}C$에서 137.6%, $80^{\circ}C$에서 164.1^, $100^{\circ}C$에서 183.8%의 평균증가(平均增加)를 보이고 있어 강도(强度)의 증가(增加)를 기대(期待)할수 있다. 4. 시멘트 : 연탄재의 모르터는 시멘트 모르터에 비(比)하여 저강도이지만 촉진양생(促進養生)의 온도조절(溫度調節)로 강도증진을 기대(期待)할수 있기 때문에 저강도를 요(要)하는 곳과 시멘트 2 차제품(次製品)의 제조(製造) 등에 이용(利用)이 가능(可能)하다고 생각된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.939-944
• /
• 2000

This study examines both strength development and pore volume of high temperature curing mortar, using a blast-furnace slag powder (BFS). This study experiments with various pre-steaming period, differing curing temperature and the replacement of BFS. According to the results, the strength development of BFS mortar is stronger when higher curing temperature are used(as opposed to standard curing). Also, regardless of the curing method, pore volume decreases as the curing time increases. From these results we can identify the optimum conditions required pre-steaming period, differing curing temperature and the replacement to produce BFS mortar properties.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2002년도 학술.기술논문발표회
• /
• pp.11-15
• /
• 2002

This study is intended to analyze the relationship between the rebound value of P type schmidt hammer and the compressive strength for a quality control of concrete. According to the results, the compressive strength of standard curing specimen increases in proportion to age, but that of air curing specimen hardly increases after 28 days. The rebound value of P type schmidt hammer, however, increases due to carbonation of concrete in air curing specimen. The correlativity between the rebound value and the compressive strength is very favorable in the case of standard curing specimen, but drops remarkably in the case of air curing specimen. Thus, as application of age coefficient is required for exact estimation of the compressive strength, the age coefficient is derived from this study. The age coefficient of P type schmidt hammer is higher at the age of 3 and 7days, and drops significantly, compared with the age of 28days. And it is lower before 28days than that of N type schmidt hammer suggested in Japan, and shows the similar tendency after 28days.

• Restorative Dentistry and Endodontics
• /
• 제26권2호
• /
• pp.127-133
• /
• 2001

There are several factors affecting the effectiveness of polymerization of the esthetic restorative materials. Among those factors, the initiator. camphoroquinone has the unique characteristic. of which the light sensitivity is very dependent on the wavelength of blue light. Camphoroquinone shows the most light absorption ability in the wavelength range of 470nm. So most of clinically used light curing systems adopt this phenomenon as their polymerization mechanism. The most popular way of light curing system is standard 40 second curing. But the problem of standard curing technique shows the rapid increase of resin viscosity followed by the acceleration of polymerization and the limited resin flow, resulted in reduction of the physicalproperty of restoration by retained stress. The object of this study was to verify the effects of narrow-banded wavelength on the microhardness of the esthetic restorative materials. a composite resin and a compomer, using filters which have peak wave length of 430nm, 450nm, 470nm, respectively. The results were as follows: 1. All the experimental groups showed lower hardness value than the control group. 2. In DyractAP, the hardness value by wavelength showed the same changing pattern on both upper and lower surfaces. 3. In DenFil, the hardness value by wavelength showed different changing pattern on upper and lower surfaces. 4. The hardness ratio showed similar pattern to the hardness variation of lower surface. but there was no significant difference between measurement in 10 minutes and 3 days later, besides the increase of hardness value.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 가을 학술발표회 논문집
• /
• pp.114-121
• /
• 1996

This study presented a simple test method of early decision on the quality of concrete by the way of refrigeration curing. It is a method of early decision for the quality of hardened concrete, after 28days, through the using refrigeration curing, at -18$\pm$$3^{\cire}C$ for five hours. I could find that there were fixed connections between the solidities after 28days and 48days, by the test of compression on the Re-Mi-Con through the test of standard curing and refergeration curing. (F = 1.02X + 13, $r^2$ = 0.964, S = 10.6kg/$\textrm{cm}^2$) I except that we can reduce the mistakes of construction work by forecasting the quality through the refrigeration curing.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.153-154
• /
• 2023

In this study, analyzed the difference in compressive strength of concrete under cold conditions, using the 28-day standard curing compressive strength as a reference and examining variations based on cement types and curing temperatures. The results showed that the strength difference based on curing temperatures reached up to 9MPa at 0℃. However, as the curing period progressed, the difference in strength due to curing temperature gradually diminished. These findings are anticipated to be valuable for concrete mixing and quality control in cold weather conditions.