• 한국재난정보학회 논문집
• /
• 제4권1호
• /
• pp.86-100
• /
• 2008

It is needed to classify the kinds of construction and demolition(c&d) debris to 6 catagories of waste concrete, waste asphalt concrete, waste wood, scraps, combustible waste and incombustible waste in order to properly do a separate discharge and to estimate unit generation rate in construction site. Also, in this case, the unit treating cost for mixed wastes should be applied with the unit treating cost for combustible waste. The construction standard materials estimation data is used for basic data for estimating unit generation rate. The mixed wastes in this data should be classified to waste wood, combustible waste and incombustible waste, and their ratio is obtained by using the unit generation rate of Asia Pacific Environment and Management Institute and Seoul Metropolitan Development Institute. The waste amounts generated from newly-built construction can be obtained from multiplying the loss rate by the amount of materials used from construction standard estimation data. Also, those from dismantling construction can be obtained by subtracting waste amount generated during newly-built construction from total input amount of materials in newly-built construction. Those in two cases can be used in construction site. It can be used for estimating the amount generated and establishing the treating plan in the case of setting up the policy of waste management and doing the environment impact assessment.

• 한국안전학회지
• /
• 제22권5호
• /
• pp.33-40
• /
• 2007

Standard safety management costs can not be applied to each site with same rate, it is very difficult, because it depends on the experience, work method, work kind, work progress schedule, and hazard level of each construction company. Therefore, this study is to find out hazard level of each work kinds through questionnaire and interview and investigate analyze the status which standard safety management costs have been used. Also, this study is to show reasonable rates of standard safety management costs in construction industry and to set up countermeasures against those problem after reviewing its status in korea with in Japan and Europe. This study is to investigate eleven project kinds of domestic system, first, and to investigate eleven items of apartment bldg, office. Also this study is to investigate and analyze performed costs of presently processing worker finished work so that it shows a new reasonable rate against standard safety management costs in construction industry, in order to make basical data and material to be systemized.

• 한국안전학회지
• /
• 제21권5호
• /
• pp.53-59
• /
• 2006

Standard safety management costs can not be applied to each site with same rate, it is very difficult, because it depends on the experience, work method, work kind, work progress schedule, and hazard level of each construction company. Therefore, this study is to find out hazard level of each work kinds through questionnaire and interview and investigate analyze the status which standard safety management costs have been used. Also, this study is to show reasonable rates of standard safety management costs in construction industry and to set up countermeasures against those problem after reviewing its status in korea with in Japan and Europe. The domestic system of standard safety management costs is not considered in the foreign country, while only related subjective items have been investigated and evaluated for this study. This study is to investigate eleven project kinds of domestic system, first, and to investigate eleven items of apartment bldg, office, civil work such as bridge, tunnel, dam, plant etc, secondly. Additionally, three items of gymnasium, railway, particular steel tower are investigated in this study. Also this study is to investigate and analyze performed costs of presently processing worker finished work so that it shows a new reasonable rate against standard safety management costs in construction industry, in order to make basial data and material to be systemized.

• 토지주택연구
• /
• 제10권3호
• /
• pp.77-87
• /
• 2019

In Korea, the modular construction method was applied to the construction of facilities such as military barracks and school dormitories, beginning with the pilot project of Seoul New Elementary School in 2003. In 2017, public modular houses were supplied to Busan(Yongho-dong) and Seoul(Gayang-dong), and modular housing is expected to continue to be supplied in the future. However, there is no clear construction standard for the modular housing construction yet, and there are few cases where the infill modular system is applied. Therefore, this study established the work breakdown structure and proposed a standard process focusing on the infill modular system applied to the construction of Dujeong-dong modular house in Cheonan. Level 1 of the work breakdown structure by construction stage of Infill modular was defined as modular manufacturing, assembly, and finishing process. Level 2 was defined as preparation, modular production, modular infill, modular fixing, floor plastering, building finishing, and other site finishing. Level 3 is defined as 57 detailed unit work of infill modular construction. The standard process of infill modular is proposed for the assembly stage that is commonly applicable to infill modular housing construction. The results of this study can be used for the process plan, transportation plan, lifting plan of modular housing construction.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1425-1432
• /
• 2010

In large construction site, although soil conversion factor is so significant to preliminary design, operation design and calculating the cost of construction that it is important to take reasonable estimation and application, the standard of soil conversion factor for weathered ground doesn't clearly suggested yet. So in this study, at first we obtain the image using DSLR - high resolution camera and Laser scanner in the Haeng-Bok city constructin site, then analysis the ratio of soil and rock using various image processing method(Sobel method, Laplace method, Highpass filter, Hue and Saturation analysis). Mutual comparation with the result of image processing analysis and manual segmentation of 5case image in the cad. As a result, best image processing method was different for each case. In case of high propotion of rock, Laplace was best and in case of high propotion of soil, Highpass was best, and mixed case Laplace was best.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 춘계 학술논문 발표대회 학계
• /
• pp.33-39
• /
• 2009

Asphalt waterproofing method has a long history over 80years since introduce to domestic market. This method has a good point as high water proofing not permeable to water by material performance of bitumen, In spite of high waterproofing, the application has become decreased. This asphalt method has some problem such as work safety, low workability by complicated work process, environmental problem in job site, it should be solve by complementary measures. 'Therefore, in this paper, suggest the principle of high pressure spray by heat cycle type equipment by analysis of exist problem and materials investigation. And. study and examine the spray type degeneration rubberized asphalt membrane materials to adopt job site. Moreover, suggest the evidence by inspection about waterproofing performance by Korean Industrial Standard through the performance test of the spray type degeneration rubberized asphalt membrane materials.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.535-542
• /
• 2010

Various difficulties have been increased in the construction of public structure; like the road in the overcrowding urban area, because of civil complaint, cost and period of construction. In oder to overcome these social problems, the tunnel has been planned the road design. Despite the resolution, there are many technical problems when constructed near facilities. The design of new tunnel below the existing service reservoir is applied to the ambient vibration blasting using Plasma. The result of test blasting was exceeded the standard ("2kine"). So it was considered a countermeasure for the vibration reduction applied to change the controlled blasting method, reduce the charge, add the pre middle horizontal hole in the cut blasting site, and so on. The result was satisfied the standard. Accordingly, if the quality of blasting process can be managed well, the application of this alternative method is highly effective one. Also, based on cost analysis between two methods, the alternative method is very competitive.

• 비교문화연구
• /
• 제23권
• /
• pp.191-214
• /
• 2011

Today the company's brand sites are in tendency locating as a handy method to administrate company vision, value and image. So this study tried to examine the aspects of storytelling around Amore Pacific's brand site. To secure the discussion's centrality and concreteness, two issues are considered to be aimed in methodology. First, the menus of relevant site were examined to see if they are securing minimal narrative. This was an attempt to discuss the minimum narrativity that target text is supposed to possess, to objectify little more the term 'storytelling.' After considering the menus of relevant site through narratological ideas of Gerald Prince, the menus that satisfy the level of minimum narrative were hardly seen. Even 'OUR STORY', showing the intention of unraveling the vision and values within the company brand by stories, is not seemed to be reaching universal, objective storytelling. Second, pragmatic, reception theory were applied as another standard to judge storytelling possibilities of Amore Pacific's brand site. Roger C. Schank's script theory, being considered in the field of cognitive linguistics and cognitive psychology, became a handy tool for examining the interactions and its meaning between brand sites and its visitors. As a result, the relevant site could be seen as attempting storytelling following time sequence, through narrator kindly explaining 'visual image-event.' And it was conjecturable that, because of such function of narrator, visitors finishes storytelling in a personal shape by operating internal story based script. This study examined the level and methods of storytelling limited in online environment called as company brand site. But more studies are needed to be in progress, such as about the ways for company websites or brand sites to have an effective, continuous influence on potential consumers, narrator set-up ways suitable for character of subordinate menus, organizations of minimum narrative and so on.

• BMB Reports
• /
• 제29권3호
• /
• pp.192-199
• /
• 1996

A rapid and sensitive method has been developed to detect a-fetoprotein (AFP) in human serum by a two-site sandwich enzyme-linked immunosorbent assay (ELISA) with monoclonal antibodies (MAbs) for human AFP within 1 h. To obtain the most sensitive and reliable MAbs. 12 kinds of MAbs (HPJ1 to HPJ12) as a capture antibody and 4 kinds of horseradish peroxidase (HRP) conjugated MAbs as a tracer antibody were investigated. Among these, only HPJ 10-HRP conjugated HPJ 1 (HPJ 10-HPJ $1^*$) and HPJ 11-HRP conjugated HPJ 10 (HPJ 11-HPJ $10^*$) were chosen as candidates based on the linearity of the standard curve and the sensitivity of the assay. To further characterize these two pairs. MAbs against human AFP were purified from hybridoma cells. conjugated with HRP. and then characterized to optimize the two-site sandwich ELISA The HPJ 10-HPJ $1^*$ pair showed a sensitivity of 1 ng/ml and a better reproducibility than the HPJ 11-HPJ $10^*$ pair when the human sera were incubated at $37^{\circ}C$ for 30 min. The results obtained for 480 randomly selected human sera showed 0~20 ng/ml of AFP values for the normal human sera. To test the utility of our kit, AFP concentrations were determined for 951 human sera (including 85 normal sera, 480 random blood sera, 213 HBsAg-positives. 50 anti-HCV antibody positives. and 47 malignant diseases) and compared with other commercially available AFP detecting kits. These results show that the present two-site sandwich ELISA method is a rapid, sensitive, and reliable procedure for detecting AFP in human serum.

• 한국수자원학회논문집
• /
• 제33권1호
• /
• pp.99-110
• /
• 2000

본 연구에서는 마코프 연쇄에 근거하여 지점간 공간상관을 적절히 고려할 수 있는 일강우의 다지점 모의 발생 방법을 제안하였다. 유역 내 여러 지점 대표지점을 선정하여 강우의 발생의 간단한 1차 마코프 연쇄에 의해 모의되도록 하였고 강우강도는 과거자료에서 무작위하게 추출하는 방법을 적용하였다. 지점간 공간상관은 모든 지점에 대해 강우강도가 대표지점과 같은 시점의 것이 일관되게 선택되도록 함으로서 그대로 유지시킬수 있었다. 모의된 일강우자료는 평균, 분산이나 평균 무강우일수, 강우일수 등의 강우 특성은 잘 재현함을 알 수 있었으나, 원자료의 군집특성(시간축에서의)은 상대적으로 약화되어 1일 지체 상관계수가 원자료의 경우보다 작게 나타나고 있으며 아울러 평균 강우지속일수 및 무강우지속일수, 강우-강우 확률 및 무강우-무강우 확률이 원자료의 그것보다 약간 작게 나타남을 파악할 수 있었다. 그러나 이러한 단점은 유역을 대표할 수 있는 지점을 적절히 선택함으로서 또한 대표지점에 대한 강우발생의 상태를 무강우-강우에서 좀더 세분화함으로서 어느 정도 보완할 수 있을 것으로 판단된다.