• Journal of the Korean Society for Heat Treatment
• /
• v.15 no.3
• /
• pp.127-135
• /
• 2002

Shore hardness test was developed in 1906 to overcome the limit of Brinell hardness test. However, the detailed requirements on the tester was not clearly specified except the scale, i.e., 100 HS for high carbon steel and 10 HS for soft brass. As a result, the shore hardness was used for quite long time without well established standards. For the establishment of hardness standards, standard tester, standard procedure, and standard hardness block must be provided. So far the standard of Shore hardness was maintained by correlating Shore hardness scale to Vickers hardness through converting equation. This is the so called converted Shore hardness and it is not the true Shore hardness standard strictly. In this paper, the possibility of establishing Shore hardness standard based on the Shore standard hardness tester is reported.

• Journal of Korean Society on Water Environment
• /
• v.28 no.3
• /
• pp.426-435
• /
• 2012

The variation of stream flow is the one of the most important factors which influence on that of water quality in the unit watershed. The target water quality goal is established and permissible load is allotted in the base of the standard flow condition along with its water quality for the management of Total Maximum Daily Loads (TMDLs). A standard flow selected could cause problems in the load allotment if it was not properly arranged. This study reviewed the acquisition of water quality data, the self-variation and the retainability in water quality on the specific flow conditions. This study also proposed the median and the adjusted average flow condition out of general flow conditions as alternative standard flow conditions. It is considered that the alternatives can make the water quality data easily acquired and the water quality representativeness more enhanced on the standard flow conditions.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.29 no.4
• /
• pp.83-90
• /
• 2006

It has lately been difficult to share the research outcomes information due to the information system not being compatible with one another. To solve this problem, it is believed that a meta data standard needs to be developed for all the institutions to follow. This paper shows how to make the research outcome of Science and Technology R&D project a standard metadata. We first classified all the research outcome into the following seven groups: Report, Journal article, Presentation material, Book, Dissertation, Industrial rights, and Technology development. We then identified three components that constitute a standard metadata. We employed the Dublin Core Metadata Set and CERIF(Common European Research Information Format) for worldwide interoperability. This Standard can be applied in the following areas: 1) Developing a standard architecture to manage research result within the organization. 2) Designing a conceptual/logical database to measure and evaluate the research outcome. 3) Developing a metadata system for research outcome as a subsystem of an Industrial Technology MDR (Metadata Registry) System.

• Journal of Korean Clinical Health Science
• /
• v.1 no.3
• /
• pp.1-9
• /
• 2013

Purpose. This research is implemented to identify the status of educations about the pricing standard, status of the cognition of the pricing standard, and the solutions to the questions on the pricing standard of the oral health professionals. it will provide the easier accessibility to the annual changes in Dental Health Insurance Standards to the oral health professionals. Methods. The research subjects are the total 204 oral health professionals in limited area, and it was analyzed with structured questionnaires. The collected data is analyzed by IBM SPSS ver. 19.0, a statistical program (IBM Co., Armonk, NY, USA) for the frequency and percentage, and ANOVA. The result is as following Results. The awareness of dental health insurance standard was statistically significant differences by age (p<0.01), career (p<0.001), the prime task (p<0.01), and dental insurance claimants (p<0.05). The awareness of the standard was statistically significant differences by educational training within last 6 months (p<0.05), the cognition of the standard (p<0.001), and solutions for the questions (p<0.05). Conclusions. As the results of the research, it is necessary to develop the educational program under condition of age, career, main task, and better understanding in Dental Health Insurance Standard for oral health professional.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.2
• /
• pp.153-158
• /
• 2021

In order to mitigate the vulnerability of the satellite navigation system against radio frequency interference, South Korea has been developing advanced terrestrial navigation system (eLoran) technology since 2016. The eLoran system synchronizes the transmission time of the pulse used in the existing Loran-C system with UTC and transmits correction information that can improve the position error. The eLoran system is known to reduce the position error of about 460 m of the existing Loran-C system to 20 m, and for this, the transmitter must be able to transmit eLoran signals according to more stringent standards. For this reason, an international standard that further developed the Loran-C signal standard established by US Coast Guard was established by Society of Automotive Engineers (SAE) International. In this paper, based on the analysis of the SAE9990 document, the international standard for eLoran transmission signals, a standard inspection process was produced to check whether the eLoran transmitter is transmitting signals in accordance with the standard.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2009.02a
• /
• pp.226.2-226.2
• /
• 2009

• 한국초전도학회:학술대회논문집
• /
• v.15
• /
• pp.47-47
• /
• 2005

• Food Science of Animal Resources
• /
• v.39 no.6
• /
• pp.934-942
• /
• 2019

Previous studies on dry aged beef, which substantially increases the value of low-grade raw beef and non-preferred cuts, are currently limited to the observation of aged beef changes in laboratory settings or under particular aging conditions, whereas the factors influencing aging have so far been underexplored. Herein, we attempt to establish a technique for distinguishing between fresh and aged beef by observing changes in quality during beef aging. Specifically, we analyzed the effect of time on the quality of aged beef sourced from three Korean manufacturers and identified quality indicators that can be used to distinguish between fresh and aged beef, regardless of supplier. Storage/trimming/aging/cooking losses, moisture/fat/protein/collagen contents, and water holding capacity were tested as potential indicators, among other parameters. As a result, the quality of dry aged beef was shown to be supplier-dependent, which made the identification of factors for the above origin-independent discrimination difficult. Nevertheless, as storage loss, water holding capacity, and cooking loss significantly changed with dry aging time in all cases, these parameters were concluded to be potentially suited for discrimination purposes. The insights gained in this work may help promoting further research in this field and contribute to the development of a standard for consistent aged beef production.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.26 no.4
• /
• pp.43-50
• /
• 2013

Objectives : This study aims to suggest preliminary standard procedure for face lift and correction of nasolabial folds using thread-embedding (Maeseon) of Korean medicine(KM). Methods : Three KM practitioners of facial correction and rejuvenation who have over hundred case of practice participated in establishment of standard procedure. Standard procedure contains preprocessing, main procedure for correction, and solution of side effects. Results : Standard procedure is comprised of twelve processes with preprocessing and postprocessing. Preprocessing has position, disinfection, and anesthesia. Main process consists of overall structure correction, face lifting, nasolabial folds correction, and mesh making on cheek. Postprocess covers disinfection, edema prevention. Conclusions : To our knowledge, this is the first work to suggest standard procedure of facial rejuvenation using Maeseon. It would contribute to standardized practice in clinical fields and future study of revealing Maeseon's effectiveness.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.1
• /
• pp.73-78
• /
• 2010

Estimation of tensile properties measurement uncertainty of material was carried out. Sources of uncertainty affecting the measurement of tensile properties were classified and analyzed. The models for uncertainty evaluation of measurands to be determined from tensile test, such as elastic modulus, yield strength and tensile strength, were suggested and derived from the mathematical relations, corresponding to the respective measurands, and the measuring quantities by calculating each sensitivity coefficient of the quantities. Based on these models, the uncertainty of the tensile properties was evaluated from the experimental data of SUS316LN determined according to ISO 6892.