• Korean Management Science Review
• /
• v.16 no.1
• /
• pp.89-99
• /
• 1999

Combat fatigues are issued to military personnel with ready made clothes. Ready made combat fatigues should be fitted to various bodies of military personnel within given standard size. This paper develops a standard sizes selection method in order to increase the coverage rate and fitness for combat fatigues. The method utilizes a generalized learning vector quantization(GLVQ) algorithm that is one of cluster algorithm in neural networks techniques. The GLVQ moves the standard sizes from initial arbitrary sizes to next sizes in order to increase more coverage rate and fitness. Finally, when it cannot increase those, algorithm is terminated. The results of this method show more coverage rate and fitness than those of the other methods.

• BMB Reports
• /
• v.29 no.5
• /
• pp.481-483
• /
• 1996

In competitive PCR, which is used to quantify target DNA an internal standard is needed. Here we present a simple method to construct homologous competitive standards. The method, which is based upon deletion of a portion of the target DNA, does not require any additional primers. This is the simplest method developed thus far to construct a competitive standard. The whole procedure. from construction of a competitive standard to quantitation by PCR, can be completed within a single day.

• Journal of the Korean Institute of Navigation
• /
• v.19 no.4
• /
• pp.63-82
• /
• 1995

This paper is a study on standard testing method for type approval of DSC which is the main structure of the terrestrial communication. As authority inspecting offices and producers have no experience for type approval of relative equipments as adapting GMDSS. In this paper, it is to be improved the understanding for type approval ; a system, standard of technic and testing methods, etc and make better quality of relative equipments. Additionally it could help quality and quantity improvement in all radiocommunication parts. Of course, the regulation for type approval had made but most makers didn't know it correctly, so the method of solution have been studied. By result of this study, with comparision and analysis of structure and a condition of efficiency with adapting GMDSS is could help some problems slove in the field and gave testing method of machinery and tools, electrical conditions, came out measurement and did ways standard efficiency.

• Analytical Science and Technology
• /
• v.29 no.6
• /
• pp.261-268
• /
• 2016

TXRF is a powerful technique for the soil sample analysis due to its ability to conduct quantitative analysis of powder sample without complicated pre-treatment processes. The conventional internal standard method used for this technique suffers from relatively low accuracy because of varying matrix effects of soil. In order to improve the accuracy, external standard method was applied to analyze two types of soil samples; acid-dissolutionized soil solution and detergent-suspended soil powder. Individual ICP-AES/MS grade standards were mixed, diluted and measured to create standard curves, but applying these curves for analyzing the soil solution sample did not make any improvement in comparison with the internal standard method. On the other hand, standard curves were created with using standard soil powders for the analysis of soil powder samples, and we found that this method increased the accuracy significantly relative to the internal standard method. Especially, Al, Fe, K, Ca, Ti, Ba, Mn, Sr, Rb, Cu was measured with relatively high accuracy (relative error = ${\pm}20%$).

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.6_2
• /
• pp.601-609
• /
• 2013

Standard lots, which are used to assess values of individual lots in Korea, have been criticized for their improper distribution. However, there has been very little evaluation for the spatial distribution of standard lots, and an evaluation method has never been developed. In order to overcome this situation, we attempt to assess the appropriateness of the spatial distribution of standard lots using the L-index and Monte Carlo simulation. The L-index is a well-known indicator of the complete spatial randomness (CSR) of points in spatial statistics. If the L-index of standard lots is similar to that of individual lots, the former is considered to be randomly distributed according to the latter. By analyzing L-indices of two study areas, Gangnam and Seongdong, we find a statistically significant difference in Gangnam area and a relatively small difference in Seongdong area. We confirm that the spatial distribution of standard lots is not CSR and that the L-index is useful as an evaluation method. These results suggest that the standard lot selection and management guidelines need to be modified to apply the spatial distribution of individual lots to the standard lot selection process.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.29 no.3
• /
• pp.113-124
• /
• 1987

The objective of this study was to disclose the problem of structural safety and the state of utilization of standard types of plastic film house through investigation of actural state of plastic greenhouses for the southern part of the Korean peninsula. And also, the application method of standard types were proposed. The results obtained are summarized as follows 1. Plastic film houses investigated were not designed by the structural design conditions of loads and materials. 2.The construction method of greenhouses was not standardized. 3.Single type of standard greenhouses was nearly used and double types were applied to the standard type. 4.The standard frames of plastic film house were appeared to have structural lack of stability at the design snow and wind loads for most regions. 5.Safety snow depths and safety wind velocities were proposed for the frame intervals and pipe diameters of standard greenhouses.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.158-159
• /
• 2014

There is urgent for defect consulting work to standardize the investigated method, repaired and reinforced method, and estimated cost about defect in increasing a defect lawsuit of apartment building. For the purpose of developing the standard process of defect consulting work, the review that a used process in law and institution should take precedence. There is not prepared the national standard for defect consulting but is dependent on an experience and a practice of consultants. This study analyzes defect consulting case, defines main steps for developing the standard process, and draws phased work factors. As systemizing this, it is expected to apply to basic structure for developing the standard process of defect consulting work for the next.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.11
• /
• pp.752-759
• /
• 2008

This paper is to make up the climograph using standard weather data of the region of Seoul. It is made up by existed standard weather data of which the subjected region is Seoul in order to easily use work. The factors of weather data are outside air temperature and its absolute humidity, total solar radiation, amount of clouds, wind direction, and wind velocity. The standard weather data are verified by comparing with values of the existed degree day method. As the result of their verification, the difference of the data showed less than 3% each other. And, reliability of standard weather data is thought to be same as those of degree day.

• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.6
• /
• pp.827-836
• /
• 2013

Due to the stringent drinking water quality, formaldehyde will be included in Korean drinking water standard from year 2014. However, its standard analytical method has not yet been established. This study compares two analytical methods, DNPH-LC and ACFAS with respect to their analysis principles, Method Detection Limit (MDL), Limit Of Quantitation(LOQ), precision, accuracy, reproducibility, convenience, number of samples analyzed per hour and analysis cost. These methods measure absorption intensity at 360 nm by using HPLC after DNPH-derivatization (DNPH-LC) and at 410 nm by using Automated Continuous Flow Absorption Spectrophotometer (ACFAS), respectively. Reproducibility was tested by repeating the analysis 7 times using a standard solution for each method. For DNPH-LC method, MDL was $0.5{\mu}g/L$, LOQ was $1.58{\mu}g/L$ with standard deviation of $0.16{\mu}g/L$. For ACFAS method, they were $0.27{\mu}g/L$, $0.85{\mu}g/L$L with standard deviation of $0.09{\mu}g/L$, respectively. Both methods satisfied the requirement set by the Korean drinking water quality standard. Complexity of sample pretreatment procedure for DNPH-LC method may cause large error and, consequently, the analytical result will depend on the level of skill of analyst. In contrast, ACFAS method which used only one reagent equipped with an automated injection device showed little analytical error. It costs about $5.00 and $1.00 for one sample to analyze by the DNPH-LC method and the ACFAS method, respectively. Compared to the DNPH-LC method, ACFAS method provided more reliable analytical results. In terms of convenience, easiness and analytical cost, ACFAS method was demonstrated to be superior to the DNPH-LC method. The results of this study suggested that the ACFAS method could be adapted as a proper method for determining formaldehyde content in drinking water.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.818-823
• /
• 2004

In case of the Korea Railroad, when we would decide the track structure, it has been introduced the whole track structure system based on only the foreign application cases and data offered by manufacturers without the process of the objective performance verification. The value of property for track materials, derived from the calculation of track structure, was hard to perform the objective performance evaluation among track structure systems because each manufacturer adopted the different test method and standard. To solve the above-mentioned problem, it should suggest the technical and objective evaluation method about the performance of track materials and meet with the standard of High Speed railroad and international railroad through the establishment and revision of performance standard. In the objective and technical respects, it will be a major role to decide the track structure. In this paper, I would like to summarize the case which was improved the problem of test method and standard exposed from the performance verification of Rail Fastening System among the track structure systems of High speed railroad.