• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2007년도 추계 종합학술대회 논문집
• /
• pp.97-100
• /
• 2007

최근 무선 통신 서비스의 증가로 다양한 안테나 모델의 개발이 이루어지고 있으며 안테나 성능 시험을 정확하고 합리적으로 평가할 수 있는 측정 기술에 대한 정량적인 연구의 필요성이 부각되고 있다. 본 논문에서는 안테나의 근역장 측정 시스템에서 안테나 특성의 자동 측정 시스템을 구축하기 위한 안테나의 끝단을 정렬하기 위한 알고리즘을 제안한다. 제안 알고리즘은 안테나의 하면 영상을 카메라로 입력받아 객체를 추출하고 안테나 객체의 윤곽선을 추출한다. 추출된 윤곽선 정보를 이용하여 객체의 왜곡정도를 측정하며 이를 보정하기 위한 각도를 추출한다. 제안한 알고리즘의 성능을 측정하기 위해 표준 혼 안테나를 이용하였으며 그 결과는 안테나 객체가 효율적으로 추출되고 왜곡 보정을 위한 각도도 측정됨을 보여준다.

• Nuclear Engineering and Technology
• /
• 제15권3호
• /
• pp.160-178
• /
• 1983

TRIGA Mark-III 원자로에서 핵연료봉의 내부 온도를 측정함으로써 노심의 출력분포를 유추하는 방법을 개발하였다. 핵연료 온도는 원자로의 안선 운전을 위하여 이미 장전되어 있는 계측 연료봉의 위치를 이동시켜 가면서 측정하였고 측정한 연료공의 수는 16개이다. 실험결과를 중성자확산이론에 의거한 노심계산의 결과와 비교한 바 최대편차는 12%, 표준편차는 5%였다. 핵연로 온도를 이용하여 연료봉의 출력밀도를 유추하는 방법은 기존의 다른 방법보다 훨씬 편리하면서 정확성을 유지할 수 있음이 판명되었다.

• 한국IT서비스학회지
• /
• 제10권1호
• /
• pp.177-190
• /
• 2011

Due to the growth of economy and the advancement of IT, the life expectancy has been prolonged and the interests in health have greatly increased. Recently the request for systems that enable measuring the bio-signals of patients in the non medical organizations, such as home, and transmitting them to medical staffs at remote sites for monitoring them. In this paper, we present an agent-based u-health system for patients or suspects with heart diseases. Our system consists of portable devices for measuring bio-signals and agents that perform data collection, data storage, automatic detection of abnormal status in patients, and HL7-based data exchange in a cooperative way. The main features of the system are : the agent-based architecture facilitates the addition of new service modules as well as the modification of existing ones; an intelligent agent is provided which automatically detects situations in which the bio-signals of patients are abnormal; the medical data standard is supported so that the communication with other systems is very easy. To our survey, there have been few previous systems which support all those features in a seamless way.

• 센서학회지
• /
• 제33권1호
• /
• pp.30-33
• /
• 2024

The occurrence of harmful algae on the coast of Korea has been a cause of damage to the aquaculture industry and deterioration of the coastal ecosystem environment. A method is required to predict their outbreak in real-time at the site. Therefore, this study attempted to develop a small hybrid optical sensor and real-time monitoring system based on LiDAR that can be used in the field and laboratory and can be applied to various platforms. FMS-L specifically suggested the amount of Chlorophyll a (Chl a) in the sample by measuring and analyzing the fluorescence emitted by the irradiating light. The accuracy of FMS-L was verified by measuring the concentrations of standard Chlorophyll a substances and Margalfidinium polykirkoids. In addition, the precision was verified by comparing the measurement results of FMS-L using commercial equipment Phyto-PAM-II. This equipment is compact and easy to move. Therefore, it can be easily applied to field surveys, allows short time measurements (10 s), and can be applied at a distance of 10 m from the measurement site.

• Journal of Magnetics
• /
• 제16권2호
• /
• pp.169-172
• /
• 2011

This study reports an alternative method for measuring the magnetoresistance of unpatterned magnetic tunnel junctions similar to the current-in-plane tunneling (CIPT) method. Instead of using microprobes, a series of point contacts with different spacings are coated on the top surface of the junctions and R-H loops at various spacings are then measured by the usual four-point probe method. The values of magnetoresistance and resistance-area products can be obtained by fitting the measured data to the CIPT theoretical model. The test results of two types of junctions were highly similar to those obtained from standard CIPT tools. The proposed method may help to accelerate the process for evaluating the quality of magnetic tunnel junctions when commercial CIPT tools are not accessible.

• Nuclear Engineering and Technology
• /
• 제55권6호
• /
• pp.2195-2205
• /
• 2023

One of the salient nuclear fuel performance parameters for new fuel types under development is changes in fuel thickness. To test the new commercially fabricated U-10Mo monolithic plate-type fuel, an irradiation experiment was designed that consisted of multiple mini-plate capsules distributed within the Advanced Test Reactor (ATR) core, the mini-plate 1 (MP-1) experiment. Each capsule contains eight mini-plates that were either fueled or "dummy" plates. Fuel thickness changes within a fuel assembly can be characterized by measuring the gaps between the plates ultrasonically. The channel gap probe (CGP) system is designed to measure the gaps between the plates and will provide information that supports qualification of U-10Mo monolithic fuel. This study will discuss the design and the results from the use of a custom-designed CGP system for characterizing the gaps between mini-plates within the MP-1 capsules. To ensure accurate and repeatable data, acceptance and calibration procedures have been developed. Unfortunately, there is no "gold" standard measurement to compare to CGP measurements. An effort was made to use plate thickness obtained from post-irradiation measurements to derive channel gap estimates for comparison with the CGP characterization.

• 대한방사선기술학회지:방사선기술과학
• /
• 제42권4호
• /
• pp.259-263
• /
• 2019

This study was purpose to compare image quality of Indirect digital radiography (IDR) system by using the International electro-technical commission standard(IEC 62220-1) which were applied to IEC in medical imaging. To evaluation the analysis of Modulation transfer function(MTF) measurements edge device each angle by using edge method. In this study, Aero (Konica, Japan) which is Indirect flat panel detector(FPD) was used, the size of image receptor matrix $1994{\times}2430$ which performed 12bit processing and pixel pitch is $175{\mu}m$. In IEC standard method were applied to each angle were compared. The results of shown as LSF at $2.0^{\circ}$ and $3.0^{\circ}$ angeles. Shape is constant and shows smooth shape. The amount of data seemed reasonable and 2.19 cycles/mm and 2.01 cycles/mm at a spatial frequency of $2.0^{\circ}$ and $3.0^{\circ}$ at an MTF value of 0.1. At an MTF value of 0.5, the spatial frequencies were $2.0^{\circ}$ and 1.11 cycles/mm and 0.93 cycles/mm at an angle of $3.0^{\circ}$. This study were to evaluate MTF by setting the each $2{\sim}3^{\circ}$ each angle and to suggest the quantitative methods of measuring by using IEC.

• Journal of the Korean Wood Science and Technology
• /
• 제47권3호
• /
• pp.253-264
• /
• 2019

This study characterized the chemical compounds in tannin from mangium (Acacia mangium) bark extract and determined the physical-mechanical properties of glued laminated timber (glulam) made from sengon (Falcataria moluccana), jabon (Anthocephalus cadamba), and mangium wood. The adhesives used to prepare the glulam were based on mangium tannin and phenol resorcinol formaldehyde resin. Five-layer glulam beams measuring $5cm{\times}6cm{\times}120cm$ in thickness, width, and length, respectively, were made with a glue spread of $280g/m^2$ for each glue line, cold pressing at $10.5kgf/cm^2$ for 4 h and clamping for 20 h. Condensed mangium tannin consisted of 49.08% phenolic compounds with an average molecular weight of 4745. The degree of crystallinity was 14.8%. The Stiasny number was 47.22%. The density and the moisture content of the glulams differed from those of the corresponding solid woods with mangium having the lowest moisture content (9.58%) and the highest density ($0.66g/cm^3$). The modulus of rupture for all glulam beams met the JAS 234-2003 standard but the modulus of elasticity and the shear strength values did not. Glulam beams made with tannin had high delamination under dry and wet conditions, but glulam made from sengon and jabon wood met the standard's requirements. All glulam beams had low formaldehyde emissions and were classified as $F^{****}$ for formaldehyde emissions according to the JAS 234 (2003) standard.

• 문화기술의 융합
• /
• 제9권4호
• /
• pp.393-399
• /
• 2023

상지 절단 장애인은 미관 목적과 기능적 필요성에 의하여 상지 의지를 착용하며, 특히 양손 절단자인 경우 잡는 동작 즉 파지동작이 가능한 근전 전동의수의 착용이 필수적이다. 잔존 근육의 근전도 신호에 의하여 작동하는 근전 전동의수는 산업재해보상보험의 공적보험 급여 품목이며, 사용자의 안전과 제품 성능의 유효성에 대한 시험 방법 표준의 개발이 필요하다. 본 연구에서는 상지 전동의수의 잡는 힘 즉 파지력을 로드셀을 이용하여 측정하고 반복 동작으로 인한 내구성을 근접센서를 이용하여 시험하기 위한 내구성 시험 장치를 개발하고 그 시험 방법의 표준을 제안한다. 아직까지 국제 표준화 기구 ISO(International Standardization Organization)의 시험 표준이 제정되지 않은 상태이므로 향후 전동의수 시험 표준 분야에서 한국의 선도적인 역할을 할 수 있을 것으로 기대된다.

• 식품과학과 산업
• /
• 제54권1호
• /
• pp.29-33
• /
• 2021

Particulate matter (PM) is an air pollutant that causes serious environmental problems in Korea and other countries. The annual average PM10 concentration in Korea is around 40 ㎛/㎥, which is more than twice as high as the WHO recommended standard. When consumed with food, fine PM can pose a risk to humans. However, the risk of fine PM has been focused on the risk of fine PM introduced through the respiratory system. We investigated the quantitative measuring methods of PM10 on food surface to identify possible risk analysis of fine PM. The surfaces of food with artificially contaminated PM10 were observed with a scanning electron microscope(SEM). An automatic object-based image analysis was used to analyze the amount and size distribution of particulate matter contained in SEM micrographs.