• Proceedings of the KSPS conference
• /
• 2005.11a
• /
• pp.193-198
• /
• 2005

The aim of this paper is to exam why the nouns that used /kh, ph, ts, th/, as the final phoneme changed. Assuming that these change related to the aspects of the word usage, we collected the word frequency and the phonetic form of words. The results are as follows : ① The realization of standard phonetic form is related to the frequency of case marker that could not be omitted, combined with the word. ② The changing into /s/ in a coronal consonant is related to the case marker [i].

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.2
• /
• pp.149-163
• /
• 1994

A novel method of dimensional measurement using machine vision, which is called Landmark Tracking System, has been developed. Its advantages come form tracking only the bright, standard shaped "landmarks" which are made from retroreflective sheets. In the design of the LTS, it is essential to know the relationship between optical parameters and their influence on system performance. Such optical parameters include the brightness of landmark image, the illumination system design, and the choice of imaging optics. And the performance of retroreflective material also plays important role in the LTS performances. Influences of such optical parameters on LTS's dimensional measurement characteristics are investigated, with respect to the retroreflective material, the imaging optics, and the illumination system. Measuremtn errors due to parameter variations are also analyzed. Experiments are performed with a LTS prototype. Retroreflective characteristics are verified, and the LTS's measurement performances are measured in the form of repeatability and accuracy. Experimental results shgow that the LTS has repeatability better than 1/30,000 of a field of view(30 degrees), and accuracy better tha 1/3,000 of a field fo view.d fo view.

• Journal of Aerospace System Engineering
• /
• v.15 no.2
• /
• pp.16-25
• /
• 2021

Reliability of fatigue strength on Aircraft Composites(GFRP) Structures was assessed in this paper. Fatigue strength of GFRP was used through the existing fatigue test data with Monte Carlo method. The S_a-N_f curve of composites fatigue strength was assumed as normal distribution and reliability was analyzed using SSIT model. Fatigue stress was designed IAW ASTM F3114-15 with special safety factor of S_sf=1.2~2.0. Reliability was calculated by analytic method and FORM. Sensitivity for the effect of mean and standard deviation of fatigue strength as well as fatigue stability was evaluated. This result can be usefully applied to reliability and fatigue design for composite structures of light weight aircraft.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.40.1-40.1
• /
• 2019

We report progress on identifying cosmic voids using cluster halos as the antipode. According to the standard scenario of structure formation, clusters are expected to form at peaks of the initial density field, whereas cosmic voids form at troughs. Then, a cluster would be a void if the sign of the initial density fluctuation of the universe were inverted. To study the relevance of anti-structures of clusters to cosmic voids, we use a pair of simulations whose initial density fields are sign inverted versions to each other. By examining the spatial distribution and environment of the particles in inverted simulation, which are the member particles of clusters in the other simulation, we discuss the characteristics of the antipode structures of clusters including their size, density, internal structure, and redshift evolution as well.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.25
• /
• pp.3-40
• /
• 2005

Many Korean construction companies have been performing a variety of overseas construction projects since the 1970s. It is unfortunate that in many cases they have had to suffer big losses caused by errors and defects in the design and construction of the projects. In the author's opinion, however, there were losses that could have been avoided if they had understood better the feature and content of the particular construction contract. Few lawyers and scholars in Korea have been interested in the research and study of international construction contracts. This is mainly because they do not have access to practical sources outside of Korea for them to research and study since the contracts undertaken have been dealt with by law firms in other jurisdictions to which the disputes apply. This article is aiming primarily at the introduction of the issues which the practitioners are likely to confront in the process of reviewing and performing the international construction contract. In some cases solutions are sought about these issues based upon the FIDIC standard terms and conditions, the actual experience of practice, and UNIDROIT Principles, etc. It is reasonable to say that all the issues related to the international construction contract cannot be covered in a short article like this. The author wishes this article could induce subsequent studies on international construction contracts for further research. It has to be noted that from time to time Korean construction practices have been compared to the international ones for better understanding. This article mostly includes cases where the Korean construction companies go overseas for their projects, while there are some cases where foreign developers and financial investors participated in domestic projects in which international construction contracts forms were adopted. A few precedent domestic writings about international construction contracts seems to lack emphasis on the points that there are several standard construction contract forms and that they are different. The differences are mainly in accordance with who bears the design responsibility, how the owner has to make progress payments to the contractor and who the funding source for the project is. This article tries to make it clear that there are significant differences between the standard contract forms, e.g. a simple construction form, a design-build form and an EPC/turnkey form of contract. Again, the author hopes that this article can arouse the interest in the international construction contracts from both academic and practical fields, so that many subsequent advanced articles can help our construction industry become much more competitive in the world through awareness of the methods of procurement and administration of the contracts.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.39
• /
• pp.27-55
• /
• 2008

The concept of non-conformity is stipulated at Art. 35, CISG. According to the Art. 35, there is no directly stipulated concept of non-conformity. But Art. 35 said that the Seller must deliver goods which are of the quantity, quality and description required by the contract and which are contained or packaged in the manner required by the contract. Accordingly, the concept of non-conformity contains the conformity of quality, quantity, description, delivery of different goods and documents. Art. 39 does not specify the form of notice required. So parties can require a particular form by agreement. If there is no agreed form of notice, buyer' s notice must be sent by means appropriate in the circumstances. And Art. 39 states that the required notice of lack of conformity must be given to the seller. Notice of defects conveyed by the buyer to an independent third party is not found to have been given by means appropriate in the circumstances. And Art. 39 is subject to the parties' power under Art. 6 to derogate from or vary the effect of any provision of the Convention. When determining which requirement must be satisfied by the buyer is specifying the nature of any lack of conformity, a mixed objective-subjective standard should be applied, which has regard to the respective commercial situation of the buyer and the seller, to any cultural differences, but above all, to the nature of the goods. Also to determine the specificity requirement is to satisfy the purpose of notice of lack of conformity.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.65
• /
• pp.141-160
• /
• 2015

With the steady growth of our nation's economy, the purchase power of our domestic citizens has continuously enhanced. In recent years, online overseas shopping has rapidly warmed up, increasing number of Chinese people have started to purchase overseas products via internet. According to China's current legislation, the imported goods are divided into goods and items based on "profitability standard", and regulated by different rules of clearance supervision and import duties. Goods can't pass through custom and pay duties in the form of items, and the import duties burden of goods is generally much heavier than that of items. Goods of entrusted overseas shopping pass through custom and pay duties in the form of items, but goods of profitable purchasing are goods, not items. Therefore, the profitable-purchasing behavior is smuggling. Although goods of unprofitable purchasing are items, unprofitable-purchasing behavior may also constitute smuggling. The author concludes that causes of smuggling crime are: huge market demand for overseas goods, lack of customs supervision, law blank of petty foreign trade, and public's misconception of entrusted overseas purchasing are the major factors. The author proposes the corresponding preventive measures against the crime, such as to establish an one-stop service system in online Shopping Mall, to modify the Passengers' Baggage Declaration Form, to establish a relatively simplified clearance system of small cargo, to establish a relatively reasonable import duties of petty trade.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.4
• /
• pp.632-638
• /
• 2002

Extensible 3D(X3D) is a software standard for defining interactive web and broadcast-based 3D content integrated with multimedia. The data size of Web3D representation based on polygon meshes is so large that transferring practical data fast is a hard problem. This paper proposes 3D object structure, a new framework for compact 3D representation with high quality surface shape. By utilizing a free form surface technique, qualified surface are transferred with limited amount of data size and rendered. 3D graphic structure can be regarded ad both polygon meshes and free form surfaces. Therefore, it can be easily integrated to existing Web3D data formats, for example VRML ＆ XML. 3D object structure also enables modeling free form surface shapes intuitively with polygon modeling like operations.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.8 no.6
• /
• pp.577-588
• /
• 2016

Due to the uncertainties related to the flaw assessment parameters, such as flaw size, fracture toughness, loading spectrum and so on, the probability concept is preferred over deterministic one in flaw assessment. In this study, efforts have been made to develop the reliability based flaw assessment procedure which combines the flaw assessment procedure of BS7910 and first-and second-order reliability methods (FORM/SORM). Both crack length and depth of semi-elliptical surface crack at weld toe were handled as random variable whose probability distribution was defined as Gaussian with certain means and standard deviations. Then the limit state functions from static rupture and fatigue perspective were estimated using FORM and SORM in joint probability space of crack depth and length. The validity of predicted limit state functions were checked by comparing it with those obtained by Monte Carlo simulation. It was confirmed that the developed methodology worked perfectly in predicting the limit state functions without time-consuming Monte Carlo simulation.

• The Research Journal of the Costume Culture
• /
• v.13 no.3 s.56
• /
• pp.439-451
• /
• 2005

This study was to provide the fundamental data for the ease necessary to design clothes by investigating the variation of the upper body surface with the method of surgical tape. The subject were 8 young women in the standard somatotype. In the form of body surface according to arm movements, the shape of armscye circumference became gentle from the sunken form for the standing posture; scye depth became lower; lateral shoulder moved and rose toward the front center as the angle of arm movement became larger; scye depth is greatest in the standing. The items of horizontal ware largest in the standing posture except for front neck base circumference and front interscye breadth for side $90^{\circ}$ movement. In the items of vertical, while most of the front items increased but back ones generally decreased for all movement compared to the standing. After comparing differences in actual values between the form of body surface in the standing posture and the direct measurement, the following ease were suggested considering minimum measures to accommodate daily movements. Bust circumference/2 = 3cm; waist circumference/2 = 1.5cm; front interscye breadth/2 = 0.6cm; back interscye breadth/2 = 0.6cm; and underarm depth = 1.5cm