• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1263-1263
• /
• 2001

The amounts of organic matter present in soil and the rate of soil organic matter (SOM) turnover are influenced by agricultural management practice, such as rotation, tillage, forage plow down direct seeding and manure application. The amount of nutrients released from SOM is highly dependent upon the state of the organic matter. If it contains a large proportion of light fractions (low-density) more nutrients will be available to the glowing crops. However, if it contains mostly heavy fractions (high-density) that are difficult to breakdown, then lesser amounts of nutrients will be available. The state of the SOM and subsequent release of nutrients into the soil can be predicted by NIRS as long as a robust regression equation is developed. The NIRS method is known for its rapidity, convenience, simplicity, accuracy and ability to analyze many constituents at the same time. Our hypothesis is that the NIRS technique allows researchers to investigate fully and in more detail each field for the status of SOM, available moisture and other soil properties in Alberta soils for precision farming in the near future. One hundred thirty one (131) Alberta soils with various levels (low 2-6%, medium 6-10%, and high >10%) of organic matter content and most of dry land soils, including some irrigated soils from Southern Alberta, under various management practices were collected throughout Northern, Central and Southern Alberta. Two depths (0- 15 cm and 15-30 cm) of soils from Northern Alberta were also collected. These air-dried soil samples were ground through 2 mm sieve and scanned using Foss NIR System 6500 with transport module and natural product cell. With particle size above 150 microns only, the “Ludox” method (Meijboom, Hassink and van Noorwijk, Soil Biol. Biochem.27: 1109-1111, 1995) which uses stable silica, was used to fractionate SOM into light, medium and heavy fractions with densities of <1.13, 1.13-1.37 and >1.37 respectively, The SOM fraction with the particle size below 150 microns was discarded because practically, this fraction with very fine particles can't be further separated by wet sieving based on density. Total organic matter content, mechanical texture, ash after 375$^{\circ}C$, and dry matter (DM) were also determined by “standard” soil analysis methods. The NIRS regression equations were developed using Infra-Soft-International (ISI) software, version 3.11.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.12
• /
• pp.41-48
• /
• 2023

In this paper, we propose an analysis of recent trends in the NFT (Non-Fungible Token) industry using topic modeling techniques, focusing on their universal application across various industrial fields. For this study, patent data was utilized to understand industry trends. We collected data on 371 domestic and 454 international NFT-related patents registered in the patent information search service KIPRIS from 2017, when the first NFT standard was introduced, to October 2023. In the preprocessing stage, stopwords and lemmas were removed, and only noun words were extracted. For the analysis, the top 50 words by frequency were listed, and their corresponding TF-IDF values were examined to derive key keywords of the industry trends. Next, Using the LDA algorithm, we identified four major latent topics within the patent data, both domestically and internationally. We analyzed these topics and presented our findings on NFT industry trends, underpinned by real-world industry cases. While previous review presented trends from an academic perspective using paper data, this study is significant as it provides practical trend information based on data rooted in field practice. It is expected to be a useful reference for professionals in the NFT industry for understanding market conditions and generating new items.

• Journal of vocational education research
• /
• v.35 no.4
• /
• pp.19-46
• /
• 2016

The purpose of this study is to analyze the curriculum implementation of the Nursing-Specialized Vocational High School by researching on operation, organization and environment of the program of Nursing. This study aims to improve the curriculum of the Nursing-Specialized Vocational High School. This study has analyzed previous existing studies, Link of School info, Educational Statistics and data indicating establishment, operation and curriculum of the department of Nursing which have been collected from web sites of institutions and associations relevant to Nurse Education. The major results of this study are as follows: 1) As of the first semester of the year 2016, out of a total of thirty eight Specialized Vocational High Schools and Meister High Schools in the country, 6.4% of the schools have nursing educational programs. These schools have established the programs under various names, such as Health Nursing, Dental Health Nursing, Nursing, Nursing and Medical Tourism, Accounting in Nursing and Nursing Management, etc. Since 2012, enrollment rates have increased while post-graduation employment rates have decreased, with the average employment rate of Specialized Vocational High School graduates having reached up to 46% by 2015. 2) The Nursing-Specialized Vocational High School aims to create skilled Nurses Assistant such as Nurse Aide and Care giver. The program is successful in providing necessary courses to acquire required certification and proficient field experience but requires revisional changes in order to create a long-term program of sufficient qualification. The official requirement of 780 hours of field practice was completed during the three educational breaks from the first year of high school to the second year, while the curriculum was conducted separately in the field hospitals. 3) An average of two laboratory classrooms were available based on the facility requirement standard of Cities and Provinces Educational Policies. In order to secure proficient instructors of Nursing education, establishment of specific indicated subjects, regional placement, in-service education, research and supervision are essential for establishing excellence and continual improvement.

• Journal of Intelligence and Information Systems
• /
• v.20 no.3
• /
• pp.109-131
• /
• 2014

As the demand of nuclear power plant equipment is continuously growing worldwide, the importance of handling nuclear strategic materials is also increasing. While the number of cases submitted for the exports of nuclear-power commodity and technology is dramatically increasing, preadjudication (or prescreening to be simple) of strategic materials has been done so far by experts of a long-time experience and extensive field knowledge. However, there is severe shortage of experts in this domain, not to mention that it takes a long time to develop an expert. Because human experts must manually evaluate all the documents submitted for export permission, the current practice of nuclear material export is neither time-efficient nor cost-effective. Toward alleviating the problem of relying on costly human experts only, our research proposes a new system designed to help field experts make their decisions more effectively and efficiently. The proposed system is built upon case-based reasoning, which in essence extracts key features from the existing cases, compares the features with the features of a new case, and derives a solution for the new case by referencing similar cases and their solutions. Our research proposes a framework of case-based reasoning system, designs a case-based reasoning system for the control of nuclear material exports, and evaluates the performance of alternative keyword extraction methods (full automatic, full manual, and semi-automatic). A keyword extraction method is an essential component of the case-based reasoning system as it is used to extract key features of the cases. The full automatic method was conducted using TF-IDF, which is a widely used de facto standard method for representative keyword extraction in text mining. TF (Term Frequency) is based on the frequency count of the term within a document, showing how important the term is within a document while IDF (Inverted Document Frequency) is based on the infrequency of the term within a document set, showing how uniquely the term represents the document. The results show that the semi-automatic approach, which is based on the collaboration of machine and human, is the most effective solution regardless of whether the human is a field expert or a student who majors in nuclear engineering. Moreover, we propose a new approach of computing nuclear document similarity along with a new framework of document analysis. The proposed algorithm of nuclear document similarity considers both document-to-document similarity (${\alpha}$) and document-to-nuclear system similarity (${\beta}$), in order to derive the final score (${\gamma}$) for the decision of whether the presented case is of strategic material or not. The final score (${\gamma}$) represents a document similarity between the past cases and the new case. The score is induced by not only exploiting conventional TF-IDF, but utilizing a nuclear system similarity score, which takes the context of nuclear system domain into account. Finally, the system retrieves top-3 documents stored in the case base that are considered as the most similar cases with regard to the new case, and provides them with the degree of credibility. With this final score and the credibility score, it becomes easier for a user to see which documents in the case base are more worthy of looking up so that the user can make a proper decision with relatively lower cost. The evaluation of the system has been conducted by developing a prototype and testing with field data. The system workflows and outcomes have been verified by the field experts. This research is expected to contribute the growth of knowledge service industry by proposing a new system that can effectively reduce the burden of relying on costly human experts for the export control of nuclear materials and that can be considered as a meaningful example of knowledge service application.

• Journal of Fisheries and Marine Sciences Education
• /
• v.2 no.1
• /
• pp.15-28
• /
• 1989

The aim of this study is to improve the curriculum for the fisheries processing department in fisheries junior college in Korea. For this study, questionaries to alumani and students of the fisheries processing department of Tong-Yeong Fisheries Junior College are made and meeting materials of professors concerned and some leading managers of food processing company. In addition, curricula of the department food processing in two year or four year colleges both domestic and foreign are refered. The results obtained can be shown as follows ; 1. Subjects of the standard laboratory work designated by the Ministry of Education and required at the practical techique examination for the food precessing technitian certificates were chosen to student compulsorily, and the other subjects necessary to acquistion of the techniques were opened in this course electively. 2. The food processing departments in nationwide twenty-three junior college open seventy-eight major subject courses. Among those subjects, we choose the subjects only related to fisheries processing ones to put stress on the features of fisheries processing department. 3. The selected courses in improved curricula of this work are total 119 credits spending 142 class-hour per weeks. Detailed curricula are as follows ; liberal arts are consist of 13 subjects-24 credits, essential major subjects 12 subjects-32 credits, elective subjects 24 subject-56 credits and interdisciplinary subjects 2 subjects-5 credits. 4. The linking system of industrial-educational co-operation have to be established to fulfil the field practice, and legal basis should be made to support these educational circumstances. 5. To make sure a live education in junior college, present education terms should be extended more than 1 year, and improved textbook, method of experiment, practice and evaluation continuously.

• The Korean Society of Law and Medicine
• /
• v.24 no.4
• /
• pp.3-36
• /
• 2023

The main issue in medical malpractice civil litigation is medical negligence and the causal relationship between medical negligence and damages. Regarding the presumption of causality in cases where medical negligence is proven, there is a previous Supreme Court decision 93da52402 on February 10, 1995, but it is difficult to find a case that satisfies the textual requirements of the above decision, and yet, in practice, the above decision is cited. In many cases, causal relationships were assumed, and criticism was consistently raised that it was inconsistent with the text of the above judgment. In its ruling, the Supreme Court reorganized and presented a new legal principle regarding the presumption of causality when medical negligence is proven in a civil lawsuit. According to this, If the patient proves ① the existence of an act that is assessed as a medical negligence, that is, a violation of the duty of care required of an ordinary medical professional at the level of medical care practiced in the field of clinical medicine at the time of medical practice, and ② that the negligence is likely to cause damages to the patient, the burden of proving the causal relationship is alleviated by presuming a causal relationship between medical negligence and damage. Here, the probability of occurrence of damage does not need to be proven beyond doubt from a natural scientific or medical perspective, but if recognizing the causal relationship between the negligence and the damage does not comply with medical principles or if there is a vague possibility that the negligence will cause damage, causality cannot be considered proven. Meanwhile, even if a causal relationship between medical negligence and damage is presumed, the party that performed the medical treatment can overturn the presumption by proving that the patient's damage was not caused by medical negligence. Meanwhile, unlike civil cases, the standard is 'proof beyond reasonable doubt' in criminal cases, and the legal principle of presuming causality does not apply. Accordingly, in a criminal case of professional negligence manslaughter that was decided on the same day regarding the same medical accident, the case was overturned and remanded for not guilty due to lack of proof of a causal relationship between medical negligence and death. The above criminal ruling is a ruling that states that even if 'professional negligence' is recognized in a criminal case related to medical malpractice, the person should not be judged guilty if there is a lack of clear proof of 'causal relationship'.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.2
• /
• pp.103-119
• /
• 2023

Since the Korean government has decided to apply the policy of BIM (Building Information Modeling) to the entire construction industry, it has experienced a positive trend in adoption and utilization. BIM can reduce workloads by building model objects into libraries that conform to standards and enable consistent quality, data integrity, and compatibility. In the domestic architecture, civil engineering, and the overseas landscape architecture sectors, many BIM library standardization studies have been conducted, and guidelines have been established based on them. Currently, basic research and attempts to introduce BIM are being made in Korean landscape architecture field, but the diffusion has been delayed due to difficulties in application. This can be addressed by enhancing the efficiency of BIM work using standardized libraries. Therefore, this study aims to provide a starting point for discussions and present a classification system for objects and attribute information that can be referred to when creating landscape libraries in practice. The standardization of landscape BIM library was explored from two directions: object classification and attribute information items. First, the Korean construction information classification system, product inventory classification system, landscape design and construction standards, and BIM object classification of the NLA (Norwegian Association of Landscape Architects) were referred to classify landscape objects. As a result, the objects were divided into 12 subcategories, including 'trees', 'shrubs', 'ground cover and others', 'outdoor installation', 'outdoor lighting facility', 'stairs and ramp', 'outdoor wall', 'outdoor structure', 'pavement', 'curb', 'irrigation', and 'drainage' under five major categories: 'landscape plant', 'landscape facility', 'landscape structure', 'landscape pavement', and 'irrigation and drainage'. Next, the attribute information for the objects was extracted and structured. To do this, the common attribute information items of the KBIMS (Korean BIM Standard) were included, and the object attribute information items that vary according to the type of objects were included by referring to the PDT (Product Data Template) of the LI (UK Landscape Institute). As a result, the common attributes included information on 'identification', 'distribution', 'classification', and 'manufacture and supply' information, while the object attributes included information on 'naming', 'specifications', 'installation or construction', 'performance', 'sustainability', and 'operations and maintenance'. The significance of this study lies in establishing the foundation for the introduction of landscape BIM through the standardization of library objects, which will enhance the efficiency of modeling tasks and improve the data consistency of BIM models across various disciplines in the construction industry.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.30 no.3
• /
• pp.89-114
• /
• 2012

For as to world, the concern about the environment problem is enhanced than any other time in the past because of being 21 century. And the environment problem is highlighted as the world-wide issue. The time of the environment problem intimidates the alive of the mankind and presence of an earth over the time. It becomes the essentiality not being selection in the personal living or the economical viewpoint now to prepare for the climatic modification. As to the company management, the green growth period which it excludes the environment management considering an environment, cannot carry on the company the continued management comes. That is, in the change center of the management paradigm, there is the environment management. Nearly, the greenhouse gas which the publication industry is the environmental toxic material like all industries is generated. The greenhouse gas is ejected in the process of running the manufacturing process and print shop of the various kinds material used as the raw material of the book. Particularly, the tree felling for getting the material of the paper is known to reach the direct influence on the global warming. This study does according to an object it considers and organizes the environment parameter based on this kind of fact as to the publication industry. And it is determined as the reference which is used as the basic materials preparing the case that carbon exhaust right transaction(CAP and TRADE) drawing are enforced in all industries and is sustainable the management of the publication industry and reduces the environmental risk among the company many risk management elements and plans and enforces the publication related policy that there is a value. In the printing publication industry, this study tried to inquire into elements discharging the environmental pollutant or the greenhouse gas. Additionally, in the printed publication production process, it tried to inquire into the effort for an environment-friendly and necessity at the printing paper and the printers ink, regarded as the element discharging the greenhouse gas all kinds of the printing materials, operation of the print shop and all kinds of the machines and recycle process, and etc. These considerations make these industrial field employees aware of the significance about a conservation and environmental protection. They try to give a help in the subsequent study producing quantitatively each environmental parameter emission of green house gas. This makes the calculation of the relative $CO_2$ output reproached ultimately possible. Meanwhile, in a sense, many research protects and improving an environment in connection with the contents of research at the printing publication industrial field is in progress. There will be the voluntary human face that it has to protect an environment but this can not do by the outside factor according to all kinds of environment related law and regulation. Anyway, because of acting on company management as the factor of oppression, the increase of this environment-related correspondence cost could know that the research that the environment loading relates with a procurement and development, environment management system introduction, quality control standard, including, normalizing including a material, and etc. through the part of the effort to reduce the cost low was actively in progress. As to the green growth era, as follows, this paper prescribed the subject and alternative of the print publication industry. It is surrounded by the firstly new digital environment and the generation of the subject. And secondly the printing industry is caused by the point of time when the green growth leaves by the topic which is largest in the global industry and it increases. The printing publication industry has to prepare the bridgehead for the environment-friendly green growth as the alternative for this resolution with first. The support blown in each industry becomes the obligation not being selection. Prestek in which the print publishing was exposed to spend many energies and which is known as the practice of the sustainable print publishing insisted that it mentioned importance of the green printing through the white pages in 2008 and a company had to be the green growth comprised through the environment-friendly activity. The core management for the sustainable printing publication industry presented from Presstack white pages is compacted to 4 words that it is a remove, reduce, recover, and recycle. Second, positively the digital printing(POD) system should be utilized. In the worldwide print out market, the digital printing area stops at the level of 10% or so but the change over and growth of the market of an analog-to-digital will increase rapidly in the future. As to the CEO Jeff Hayes of the Infoland, the offset print referred to that it of the traditional method got old and infirm with the minor phase of the new printing application like the customer to be wanted publication and the print of the digital method led the market. In conclusion, print publishers have to grasp well the market flow in the situation where a digitalization cannot be generalized and a support cannot avoid. And it keeps pace with the flow of the digital age and the recognition about the effort for the development and environment problem have to be raised. Particularly, the active green strategy is employed for the active green strategy.

• Journal of Korean Academy of Nursing
• /
• v.4 no.3
• /
• pp.63-79
• /
• 1974

1. The purpose of this study. The purpose of this study is to plan and investigate short-term nursing education of two-years associate degree program to produce middle-level professional nurses which are needed by-society and nation. Current nursing education in Korea is divided into four years degree program, three years diploma program Even (though) there are differences in the aims of their education, the curriculums are not much different between the education for producing leaders which is its basic purpose and training middle-level professional nurses. Therefore the purpose of associate degree program lies in minimizing the waste of time and finance which are invested for long-term education for middle-level professional nurses. And also this coincide with the policy of national technical training and definite supply of nurse manpower according to health policy for effective role and ability of nurse. 2. The method of study. This is based on the study of literature, research on the actual condition and investigation of opinion- through questionnaire. L) The study of literature: Domestic and foreign literatures for two years associate degree program were studied and investigated. 2) Research on the actual condition : Current three years nursing education program was collected and analysed. 3) Investigation of opinion. The problem of curried nursing education system and the possibility of two years associate degree program were investigated through questionnaire. 3. The result of the study. 1) The trend of recent nursing education. a. The aims of nursing in past chiefly taking care of physical disease of patient has recently changed to nursing of character including physical, mental, socio-economic, educational and psychological condition. b. For the performing systematic and effective nurse's duty according to her role, the-change of educational system which is classified as a range of education the period of education and certificate after graduation has been enforced or fulfilled. c. Nursing education also has a trend to become a collage or two years associate degree program which can get same legal protection as other educational institutions whose basic purpose is education. Attached nursing school to hospital is getting disappeared because of disadvantage of educational system. 2) Problems. Depending upon research on actual condition of current 3 years nursing education program. a. There are too many subjects. b. Contents of education could be doubled because major subjects are subdivided in detail. c. The credits for graduation are too heavy comparing to the period of study or the ability of students. (The necessary credits are 150.8 for three years according to actual investigation 4. There is no certain standard in organizing curriculum therefore there are too much differences between schools. 4. Basic Plan. The plan for two years associate degree program in nursing education depending on demand of professional nursing field of society is based on following items. 1) Training middle-level professional nurse lay emphasis on liberal arts and basic major field. 2) Liberal arts are divided into required and optional subjects and students could take courses by choice. 3) Major subjects are compound together by fields and they become the sciences of nursing Ⅰ,Ⅱ,Ⅲ,Ⅳ and every items has its educational purposes and contents major study includes laboratory practice and clinical experience. 4) The required credits for graduation are to which means 17-18 credits a semester. The above has been planned to solve the problems of current three years nursing education program. In conclusion for the achievement of this system, following items are needed. 1) It is necessary to change educational administration and system such as amendment of educational law or order of educational application of law. 2) Qualified professors should be available to understand and develope the idea or purpose of this educational system. 3) Local medical institutions should be opened widely and educational for clinical training. 4) The job after graduation should he secured positively.

• Journal of Korean Elementary Science Education
• /
• v.43 no.3
• /
• pp.353-364
• /
• 2024

The purpose of this study is to analyze the achievement standards for grades 3-4 of the 2022 revised science curriculum and identify the goals of science education for grades 3-4 of the 2022 revised curriculum, as well as provide implications for the development of the science textbooks for grades 3-4 and the direction of teaching for teachers in the field. For this purpose, 57 achievement standards of the Science Department 2022 revised curriculum for grades 3-4 were analyzed as to their knowledge dimensions and cognitive processes according to Bloom's Taxonomy of the New Educational Objectives. In cases where an achievement standard is a double sentence or combines two or more knowledge dimensions or cognitive process dimensions, we separated the sentences after having consulted with a group of experts and divided the achievement standards into 57 sentences. We then analyzed the frequency of the categorization of concepts and descriptors by comparing them with the previously studied elementary science standards from the 2015 revised curriculum. The main findings of the study are as follows. First, in the knowledge dimension, the "factual knowledge" accounted for 50 items (86%), compared to "conceptual knowledge" (10%), and "procedural knowledge" (4%), and "metacognitive knowledge" was not analyzed at all. Second, in terms of the cognitive processes, "Understanding" was the highest at 60% with 34 items. It was followed by "applying" with 11%, "creating" with 19%, "evaluating" with 15%, and "analyzing" and "remembering" with 6%. Third, when analyzing the descriptors, "I can explain" was the highest with 9%, followed by "comparison" with 6%, and "practice" and "classification" with 5%. Fourth, compared to the 2015 revised curriculum, "conceptual knowledge" was reduced and "factual knowledge" was overwhelmingly increased. Fifth, in the cognitive process dimension, "understanding,' has increased significantly, while the other cognitive process dimensions have decreased. Conclusions and implications based on these findings are as follows: the focus of the Science Department for grades 3-4 in the 2022 revised curriculum is heavily weighted toward the "factual knowledge," with "understanding" dominating the cognitive process dimensions. As a result, many concepts and applications have been reduced. Based on the results of the comparison of the descriptors with the results of the 2015 revised curriculum, the implications for the development of the science textbooks for grades 3-4 of the 2022 revised curriculum were discussed, and so were the implications of the curriculum for the field.