• Near Infrared Analysis
• /
• v.2 no.1
• /
• pp.59-66
• /
• 2001

Nowadays, medical diagnostics is efficiently supported by clinical chemistry and near infrared spectroscopy is becoming a new dimension, which has shown high potential to provide valuable information for diagnosis. The investigation was carried out to study the influence of mammary gland inflammation, called mastitis, on cow´s milk spectra and milk composition measured by near infrared spectroscopy (NIRS). Milk somatic cell counts (SCC) in milk were used as a measure of mammary gland inflammation. Naturally occurred variations with milk composition within lactation and in the process of milking were included in the experimental design of this study. Time series of unhomogenized, raw milk spectral data were collected from 3 cow along morning and evening milking, for 5 consecutive months, within their second lactation. In the time of the trial, the investigated cows had periods with mammary gland inflammation. Transmittance spectra of 258 milk samples were obtained by NIRSystem 6500 spectrophotometer in 1100-2400 nm region. Calibration equations for the examined milk components were developed by PLS regression using 3 different sets of samples: samples with low somatic cell count (SCC), samples with high SCC and combined data set. The NIR calibration and prediction of individual cow´s milk fat, protein, and lactose were highly influenced by the presence of mil samples from animals with mammary gland inflammation in the data set. The best accuracy of prediction (i.e. the lower SEP and the higher correlation coefficient) for fat, protein and lactose was obtained for equations, developed when using only “healthy” samples, with low SCC. The standard error of prediction increased and correlation coefficient decreased significantly when equations for low SCC milk were used to predict examined components in “mastitis” samples with high SCC, and vice versa. Combined data set that included samples from healthy and mastitis animals could be used to build up regression models for screening. Further use of separate model for healthy samples improved milk composition measurement. Regression vectors for NIR mild protein measurement obtained for “healthy” and “mastitic” group were compared and revealed differences in 1390-1450 nm, 1500-1740 nm and 1900-2200 nm regions and thus illustrated post-secretory breakdown of milk proteins by hydrolytic enzymes that occurred with mastitis. For the first time it has been found that monitoring the spectral differences in water bands at 1440 nm and 1912 nm could provide valuable information for inflammation diagnosis.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.11a
• /
• pp.81-87
• /
• 2004

It includes the considerable concentration and dangerousness as the peculiar work of a pilot and dock-master to berthing/deberthing the big object as for the ship within the port or the ship yard. A tug utilization is getting increased in this berthing/deberthing work and the own ship is affected a lot by external force due to moving with low advance speed. In this study, we constructed the 2 dimension virtual system which can conduct the berthing/deberthing manoeuvring work by using mainly tugs in a external force, particularly strong wind. Also, propose objective standard that could estimate the degree of manoeuvring difficulty, and conducted simulation experiment for this. we analyzed correlations between the subjective estimation which is described numerically the decreased dangerousness and the objective index which is related to the main parameter regarding manoeuvring by using this simulator from the result of conducting simulation experiment. And then we discussed the estimation technique of manoeuvring difficulty.

• Journal of Sasang Constitutional Medicine
• /
• v.18 no.2
• /
• pp.41-49
• /
• 2006

1. Objectives The Face is an important standard for the classification of Sasang Contitutions. We are developing 3D Face Automatic Recognition Apparatus to analyse the facial characteristics. So We should examine a shape demobilization error of 3D Face Automatic Recognition Apparatus. 2. Methods We compared facial shape data be demobilized by 3D Face Automatic Recognition Apparatus with facial shape data that be demobilized by 3D laser scanner. The subject was two korean men. And We analysed the average error and the maximum error of two data. In this process, We used one datum point(the peak of nose) and two datum line(vertical section and horizontal section). 3. Results and Conclusions In each this comparison, the average error of vertical section was 1.962574mm and 2.703814mm. and the maximum error of vertical section was 16.968249mm and 18.61464mm. the average error of horizontal section was 4.173203mm and 21.487479mm. and the maximum error of horizontal section was 3.571210mm and 17.13255mm. Also We complemented this apparatus a little and We reexamined a shape demobilization error of 3D Face Automatic Recognition Apparatus again. Accuracy of a shape demobilization was improved a little. From now on We complement accuracy of a shape demobilization in 3D Face Recognition Apparatus.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.1
• /
• pp.31-43
• /
• 2015

This study had been aimed to conduct the camera calibration on VLBI antenna in the Space Geodetic Observation Center of Sejong City with a low-cost digital camera, which embedded in a mobile phone to determine the three-dimension position coordinates of the VLBI antenna, based on stereo images. The initial values for the camera calibration have been obtained by utilizing the Direct Linear Transformation algorithm and the commercial digital photogrammetry system, PhotoModeler $Scanner^{(R)}$ ver. 6.0, respectively. The accuracy of camera calibration results was compared with that the camera calibration results, acquired by a bundle adjustment with nonlinear collinearity condition equation. Although two methods showed significant differences in the initial value, the final calibration demonstrated the consistent results whichever methods had been performed for obtaining the initial value. Furthermore, those three-dimensional coordinates of feature points of the VLBI antenna were respectively calculated using the camera calibration by the two methods to be compared with the reference coordinates obtained from a total station. In fact, both methods have resulted out a same standard deviation of $X=0.004{\pm}0.010m$, $Y=0.001{\pm}0.015m$, $Z=0.009{\pm}0.017m$, that of showing a high degree of accuracy in centimeters. From the result, we can conclude that a mobile phone camera opens up the way for a variety of image processing studies, such as 3D reconstruction from images captured.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.6
• /
• pp.621-629
• /
• 2015

Construction worker safety and safety training continue to be main issues in the construction industry. In order to promote safety awareness among workers, it is imperative to develop a more effective and efficient safety training. This study compared two methods in construction worker safety training: 1) a conventional lecture and 2) 3D simulation through Building Information Modeling. Both training methods included the same contents, a selection of safety standard and guide suggested by Occupational Safety and Health Agency and the Korea Occupational Safety and Health Agency; the contents were then produced into two types of training methods. A survey was conducted targeting on safety managers, in which the managers evaluated lifelikeness, active learning and enjoyment that each of training methods can promote. The results of the survey showed that innovative method using 3D simulation was more effective than conventional lecture method in terms of its lifelikeness, active learning and enjoyment. This study will provide implications that innovative method using the virtual reality is more effective than conventional lecture method.

• Journal of Acupuncture Research
• /
• v.24 no.3
• /
• pp.215-229
• /
• 2007

Objectives : Placebo phenomena have been considered as a confounding factor of clinical trial. Expectancy and belief of acupuncture have not been evaluated quantitatively. The present study was performed to analyze the emotional and cognitive factor .of acupuncture and investigate whether the expectancy of acupuncture treatment is associated with the cognition of acupuncture. Methods : The expectancy and the perception of bodily sensation (PBS) of 22 participants were assessed using self-reported questionnaire. The subjects used the self assessment manikin (SAM) to rate each of the standard affective image of the international affective picture system (lAPS) and other acupuncture-related image. Based on the degree of expectancy, the high expectant (HE) and the low expectant (LE) group were classified. The thermal and pressure pain threshold was objectively evaluated using radiant-heat device and algometer. The degree of expected pain of acupuncture and the actual pain of painful stimulation was subjectively evaluated using facial pain scales (FPS). Results : Using SAlVI analysis, we identified the negative correlation between hedonic valence and arousal dimension on acupuncture-related visual cue. The degree of the PBS and general pain threshold did not show any significant difference between the HE and the LE group. The HE group rated the acupuncture images as more pleasant, more arousing, than the LE group. In addition, we also found that the higher expectancy marked the lower FPS of the expected pain of acupuncture, but not of the actual pain of painful stimulation. Conclusions : Our preliminary study identified the psychological dimensions of acupuncture-related visual cue. These findings indicate that the expectancy of acupuncture could affect the cognition of acupuncture.

• Tunnel and Underground Space
• /
• v.16 no.1 s.60
• /
• pp.26-37
• /
• 2006

This study addresses the applicability of box fractal dimension, $D_B$, as an index of statistical homogeneity of fractured rock mass. The box-count method's capability in quantifying the combined effect of fracture density and size distribution is examined systematically. Total of 129 two-dimensional fracture configurations were generated based on different combinations of fracture size distribution and fracture density. $D_B$was calculated for the generated fracture network systems using the box-counting method. It was found that was standard deviation of trace length and fracture orientation have no effect on calculated $D_B$. The estimated $D_B$ was found to increase with increasing total density and/or mean trace length. To explore the field applicability of this study, the statistical homogeneity of fractured rock mass was investigated at the rock slope and the underground facility using the box-counting method as well as conventional contingency table analysis. The results obtained in this study clearly show that the methodologies given in this paper have the capability of determining the statistical homogeneity of fractured rock mass.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.5
• /
• pp.406-418
• /
• 2004

Last days, various kinds of applications and system were individually introduced into specific groups or enterprises by different objective without considering interoperability among those. However, the environment for data processing is changing rapidly in these days. And now the necessity is growing to integrate and couple applications and system in the process dimension for more flexible and quicker data processing on these application programs and system. When integrating these application programs or system, an integration based on XML is recommended as it is one of good methods which will the additional cost and satisfy the requirements of the integration. This is because the XML is not only device-independent data type which can be used any platform, but also it uses XSLT, the document conversion standard established by W3C, which allows easy data conversion from one to another type on occasion of demands. This paper studies a design and implementation of system to convert XML structure. This system shows the structure of source- side providing data and destination-side processing data with using XML schema that defines structural information of a XML document. And this system defines the structure relationship of desired form as mapping structural information and data. This system creates the XSLT document that defines conversion rule between two structures based information which is defined. The XSLT document which is created as described above will convert data to be appropriate to the structure of the destination- side. By implementing this system, it is able to apply a document into various kinds of structure without considering specific system or platform and it is able to construct XSLT document to which meaning of desired form can be given. This paper aims to offer a process conversion between documents and to improve interoperability and scalability, so that we can contribute to build XML document processing environment

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.1
• /
• pp.87-93
• /
• 2006

Inventories, and characteristics such as dimension, fuel rod array, weight, $^{235}U$ enrichment, and discharge burnup of spent nuclear fuel (SNF) generated from existing and planed nuclear power plants based on National 2nd Basic Plan for Electric Power Demand and Supply were investigated and projected to support geological disposal system design. The historical and projected inventory by the end 2057 is expected to be 20,500 and 14,800MTU for PWR and CANDU spent nuclear fuel, respectively. The quantity of SNF with initial $^{235}U$ enrichment of 4.5 wt.% and below was shown to be 96.5% in total. Average burnup of SNF revealed $\sim36$ GWD/MTU and $\sim40$ GWD/MTU for the period of 1994-1999 and 2000-2003, respectively. It is expected that the average burnup of SNF will be $\sim45$ GWD/MTU at the end of 2000's. From the comprehensive study, it was concluded that the imaginary SNF with $16\times16$ Korean Standard Fuel Assembly, cross section of $21.4cm\times21.4cm$, length of 453cm, mass of 672 kg, initial $^{235}U$ enrichment of 4.5 wt.%, discharge burnup of 55 GWD/MTU could cover almost all SNFs to be produced by 2057.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.11
• /
• pp.1638-1652
• /
• 2000

Prolific females require better nutrition and feeding practice because of larger litter size and the substantial decline in body fat. Life-time pig output will be compromised if body protein and fat are not properly managed. First litter females are especially vulnerable because they can loose ${\geq}15%$ of whole-body protein. Conservation of body protein mass during first lactation minimizes wean to estrus interval and increases second litter size (up to 1.2 pigs). The ability to influence litter-size by amino acid nutrition is a new dimension in our understanding. A P2 fat depth below 12 mm at farrow and below 10 mm at wean compromised wean to estrus interval (>2 d) and next litter size (0.5 to 1.5 pigs) in sows. It is now clear that a 'modest' excess of feed during the first 72 h of pregnancy decreases embryo viability so that the potential for an increased litter size at birth is not realized. The capacity for milk production by prolific young sows is 25% higher than the standard used previously (NRC, 1988). First litter females averaged 9.82 kg milk/d for a 21 d lactation. Second and third litter counterparts averaged 10.35 kg/d. Milk production was 95% of peak by 10 d of lactation and sows were in greatest negative energy and lysine balance during the first 6 d. Nearly 45% of the total loss in body protein occurred within the first 6 d, but this could reduced to 30-35% by using a more aggressive feeding strategy after parturition. There appear to be 2 phases in lactation for lysine need (d 2-12 vs 12-21). Feeding to the higher level alleviates the second litter size decline. The lysine requirement for lactation can be predicted with accuracy, but we are not able to predict the second limiting amino acid. Mammary uptake of valine relative to lysine and recent work with practical diets suggest that the recent NRC (1998) pattern is realistic and that threonine and valine could be co-limiting for corn-soy diets for prolific sows nursing 10-11 pigs. Empirical studies are needed to refine the ideal pattern so that synthetic lysine can be used with more confidence. Milk fat output for the elite sow is extraordinary and poses an unnecessarily high energetic cost. Methods that reduce mammary fat synthesis will benefit the sow and may enhance piglet growth.