• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제23권1호
• /
• pp.15-24
• /
• 2017

Purpose: Korea is expected to enter an aged society in 2018 and then a super-aged society in early 2025. The country's aging is progressing faster than any other country in the world. However, the foundation of the elderly friendly industry is weak, and measures at the government level are urgently needed. Especially, housing problems of the elderly are one of the most urgent measures to be taken. Korea does not have the minimum residential area standard for the elderly, and the current general minimum residential area standard is based on the survey of the housing situation without scientific evidence. Therefore, both standards need to be revised as soon as possible based on scientific evidence. Methods: The minimum residential area standard has been calculated following Karl H. E. Kroemer's Min or Max design also being called as-single cut and dual cut theory- as the maximum population value and minimum population value theory of Ernest J. McCormick. Therefore there is a need for a formula made using a few key factors, such as corresponding dimension, practical dimension, clearance, spare dimension, integrated dimension. These elements can be defined and used as formulas to calculate minimum residential area standards. Results: Assuming the results of the spatial variability in this study showed that it is possible to raise the standard of living in a terms of sustainable minimum size for the young, old and all residents. Implications: The government should set a minimum residential area standard with scientific grounds and set up a policy improving the life of people who live in an needy residential environment.

• 유통과학연구
• /
• 제13권7호
• /
• pp.41-51
• /
• 2015

Purpose - This study analyzes loading efficiency by loading pattern for package standardization and reduction of logistics costs, along with the creation of revenue for the revenue review panel (RRP) of Membership Wholesale Clubs (MWC). The study aims to identify standard dimensions that can help improve the compatibility of the pallets related to display patterns preferred by the MWC and thereby explore ways to enhance logistics efficiency between manufacturers and retailers through standardization. Research design, data, and methodology - The study investigates and analyzes the current status based on actual case examples, i.e., manufacturer A and Korea's MWC (A company, B company, and C company), and thus devises improvement measures. To achieve this, the case of manufacturer A delivering to MWC was examined, and the actual pallet display patterns for each MWC were investigated by visiting each distribution site. In this study, TOPS (Total Optimization Packaging Software, USA) was used as the tool for pallet loading efficiency simulations the maximum allowable dimension was set to 0.0mm to prevent the pallet from falling outside the parameters, and the loading efficiency was analyzed with the pallet area. In other words, the study focused on dimensions (length x width x height) according to the research purpose and thereby deduced results. Results - The analysis of pallet loading patterns showed that the most preferred loading patterns for loading efficiency according to product specification, such as pinwheel, brick, and block patterns, were used in the case of the general distribution products, but the products were configured with block patterns in most cases when delivered to MWCs. The loading efficiency by loading pattern was analyzed with respect to 104 nationally listed standard dimensions. Meanwhile, No.51 (330 × 220mm) of KS T 1002 (1,100 × 1,100mm) was found to be the dimension that could bring about an improved loading efficiency, over 90.0% simultaneously in both the T-11 and T-12 pallet systems in a loading pattern configuration with the block pattern only, and the loading efficiency simulation results also confirmed this as the standard dimension that can be commonly applied to both the T-11 pallet (90.0%) and the T-12 pallet (90.7%) systems. Conclusions - The loading efficiency simulation results by loading pattern were analyzed: For the T-11 pallet system, 17 standard dimension sizes displayed the loading efficiency of 90.0% or more as block patterns, and the loading capacity was an average of 99.0%. For the T-12 pallet system, 35 standard dimension sizes displayed the loading efficiency of more than 90% as block patterns (the average loading efficiency of 98.6%). Accordingly, this study proposes that the standard dimensions of 17 sizes with the average loading efficiency of 99.0% should be applied in the use of the T-11 pallet system, and those of 35 sizes with the average loading efficiency of 98.6% should be reviewed and applied in the use of the T-12 pallet system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.211-211
• /
• 2000

The multiple targets tracking problem has been one of main issues in the radar applications area in the last decade. Besides the standard Kalman filtering, various methods including the variable dimension filter, input estimation filter, interacting multiple model (IMM) filter, federated variable dimension filter with input estimation, probable data association (PDA) filter etc. have been proposed to address the tracking and sensor fusion issues. In this paper, two existing tracking algorithms, i.e. the IMMPDA filter and the variable dimension filter with input estimation (VDIE), are combined for the purpose of improving the tracking performance of maneuvering targets in clutter. To evaluate the tracking performance of the proposed algorithm, three typical maneuvering patterns i.e. Waver, Pop-Up, and High-Diver motions, are defined and are applied to the modified IMMPDA filter considered as well as the standard IMM filter. The smaller RMS tracking errors, in position and velocity, of the modified IMMPDA filter than the standard IMM filter are demonstrated through computer simulations.

• 대한치과교정학회지
• /
• 제15권1호
• /
• pp.23-42
• /
• 1985

The morphology and growth changes of the Craniofacial Complex are important in orthodontics and cephalometrics for analysis and evaluation of facial bone growth are widely used. The author analyzed the data using lateral cephalometric roentgenogram of 75 Korean male and 50 Korean females age of 6 to 10 with normal occlusion to provide informations-relative rates of facial bone growth of Korean which is to be contributed in Korean standard. The results were as follows: 1. Means, standard deviation and coefficient of variation of Korean children were obtained. 2. The item which showed significent difference between male and female was craniofacial height in absolute dimension. 9. No difference of sex was showed in increment of craniofacial height and depth. 4. Among the craniofacial depth increments, the lower facial depth dimension increased most, midfacial depth dimension increased less, and cranial depth dimension increased the least. 5. The horizontal body of mandible showed rapid growing tendency more than did the ascending ramus.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2003년도 Proceeding
• /
• pp.45-49
• /
• 2003

GDS (Grating automatic Drawing System), which is automatic design system of metal products called grating, is a system that produces various detailed drawings on the basis of information within a Plan Drawing that represents layout of the gratings such as locations, shapes, directions, etc However, automatically produced drawings by GDS do not fully satisfy the standard of the general dimension marking method used among the layout designers. The lack of this standard quality mainly results from the fact that overlapping among dimension markings appears frequently. To solve the overlapping problem we applied the rule-based expert system. The rules for the expert system are designed based on the expertise of skilled layout designers within the grating production lines.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2009년 춘계학술발표대회 논문집
• /
• pp.230-235
• /
• 2009

In our country, the application of the design method of face to face dimension in wall-slab apartment has passed 10 years. So MC design method has fixed in the design step to some degree. In Design and Work Execution of House the exclusive area of the apartment was calculated by face to face dimension. And the term of face to face dimension was known broadly to clients, construction company, etc. But design method of face to face dimension is not to simply extend the room size so far as wall depth in design process but to ensure the actual space should be considered with efficient use and assembly of building components. That is to say, Design method of face to face dimension is not to be defined by design step but to be related with construction and maintenance. However in construction process the point of face to face design method was not understood even now. So the purpose of this study was to extract the effect and question of face to face design method in construction process by survey of actual condition of structure and construction quality, and compare this result with existing construction method. The following project of this study is to survey of actual condition of interior components such as gypsum board, windows & doors etc. Therefore this study is to induce architectural long-life through architectural standardization construction and component's exchange, and, by the subject of the study on Apartment to have design guideline and basis for joining part between Gypsumboard and windows.

• 한국주거학회논문집
• /
• 제20권4호
• /
• pp.31-38
• /
• 2009

In our country, the application of the design method of face to face dimension in wall-slab apartment has passed 10 years. So MC(Modular Coordination) design method has fixed in the design step to some degree. In Design and Work Execution of House the exclusive area of the apartment was calculated by face to face dimension. And the term of face to face dimension was known broadly to clients, construction company, etc. But design method of face to face dimension is not to simply extend the room size so far as wall depth in design process but to ensure the actual space should be considered with efficient use and assembly of building components. That is to say, Design method of face to face dimension is not to be defined by design step but to be related with construction and maintenance. However in construction process the point of face to face design method was not understood even now. So the purpose of this study was to extract the effect and question of face to face design method in construction process by survey of actual condition of structure and construction quality, and compare this result with existing construction method. The following project of this study is to survey of actual condition of interior components such as gypsum board, windows & doors etc. Therefore this study is to induce architectural long-life through architectural standardization construction and component's exchange, and, by the subject of the study on Apartment to have design guideline and basis for joining part between Gypsumboard and windows.

• 한국강구조학회 논문집
• /
• 제11권3호통권40호
• /
• pp.259-270
• /
• 1999

본 연구에서는 대수심 해안에서 호안 구조물의 조성에 적합한 근입식 강판셀 구조의 표준설계절차를 확립하고 최적제원 결정을 위한 연구를 수행하였다. 최적 제원의 결정을 위해 셀 안전성 검토용 전산프로그램을 개발하고 강도가 다른 사질토 지반에 대해 수심별로 가능한 제원을 프로그램을 사용하여 도출한 뒤 최적 강판셀 제원 결정을 위한 일반식을 제안하였다. 아울러 강판셀의 관입을 위한 진동햄머 시스템의 소요 기진력 산정식의 타당성을 확인하는 모형실험을 수행하였으며, 제안한 셀제원에 대한 소요 기진력의 데이터를 제시하였다.

• 전자공학회논문지S
• /
• 제34S권11호
• /
• pp.114-125
• /
• 1997

This paper presents a method that automatically recognizes dimension sets from the mechanical drawings, and that classifies 6 types dimension sets according to functional purpose. In the proposed method, the object and closed-loop symbols are separated from the character-free drawings. Then object lines and interpretation lines are vectorized. And, after recognizing dimension sets(consistings of arrowhead, shape line, tail lines, extension lines, text-string, and feature control frame), we classify recognized dimension sets as horizontal, vertical, angular, diametral, radial, and leader dimension sets. Finally the proposed method converts classified dimension sets into AutoCAD data by using AutoLisp language. By using the methods of geometric modeling, the proposed method readily recognized and classifies dimension sets from complex drawings. Experimetnal results are presented, which are obtained by applying the proposed method to drawings drawn in compliance with the KS drafting standard.

• 한국시뮬레이션학회논문지
• /
• 제13권4호
• /
• pp.31-42
• /
• 2004

GDS (Grating automatic Drawing System), which is an automatic design system of a metal product called grating, is a system that produces various detailed drawings on the basis of information within a Plan Drawing that represents layout of the grating such as locations, shapes, directions, etc. However, automatically produced drawings by GDS do not fully satisfy the standard of the general dimension marking method used among the layout designers. The lack of this standard quality mainly results from the fact that overlapping among dimension markings appear frequently. To solve the overlapping problem we applied the rule-based expert system. The rules are designed based on the expertise of skilled layout designers within the grating production lines.