• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2002년도 춘계학술발표대회 논문집
• /
• pp.86-90
• /
• 2002

A new concept of building, office-tel, had gone through many ups and downs after being introduced to our nation. However, it overcame all the problems and is now an important part of the rural construction. It showed new potential especially on 1998 by flexibly corresponding when the IMF crisis occurred causing a radical social/economical change. It played a crucial role on activating the depressed real estate business and flourished like never before. This study analyses the office-tel market change pattern and factors by time period and grasps the causal relationship and attempts to set a new standard to evaluate the social/economical role and value of the office-tel.

• 한국도로학회논문집
• /
• 제18권1호
• /
• pp.13-21
• /
• 2016

PURPOSES : In this study, we analyzed the compressive strength characteristics of lean base concrete in relation to changes in the outdoor temperature after analyzing the cold and hot weather temperature standards and calculated the minimum and maximum temperatures when pouring concrete. We examined the rate of strength development of lean base concrete in relation to the temperature change and derived an appropriate analysis formula for FRC base structures by assigning the accumulated strength data and existing maturity formula. METHODS : We measured the strength changes at three curing temperatures (5, 20, and $35^{\circ}C$) by curing the concrete in a temperature range that covered the lowest temperature of the cold period, $5^{\circ}C$, to the highest temperature of the hot period, $35^{\circ}C$. We assigned the general lean concrete and FRC as test variables. A strength test was planned to measure the strength after 3, 5, 7, 14, and 28 days. RESULTS : According to the results of compressive strength tests of plain concrete and FRC in relation to curing temperature, the plain concrete had a compressive strength greater than 5 MPa at all curing temperatures on day 5 and satisfied the lean concrete standard. In the case of FRC, because the initial strength was substantially reduced as a result of a 30% substitution of fly ash, it did not satisfy the strength standard of 5 MPa when it was cured at $5^{\circ}C$ on day 7. In addition, because the fly ash in the FRC caused a Pozzolanic reaction with the progress into late age, the amount of strength development increased. In the case of a curing temperature of $20^{\circ}C$, the FRC strength was about 66% on day 3 compared with the plain concrete, but it is increased to about 77% on day 28. In the case of a curing temperature of $35^{\circ}C$, the FRC strength development rate was about 63% on day 3 compared with the plain concrete, but it increased to about 88% on day 28. CONCLUSIONS : We derived a strength analysis formula using the maturity temperatures with all the strength data and presented the point in time when it reached the base concrete standard, which was 5 MPa for each air temperature. We believe that our findings could be utilized as a reference in the construction of base concrete for a site during a cold or hot weather period.

• 대한토목학회논문집
• /
• 제42권1호
• /
• pp.95-105
• /
• 2022

최근 공사규모의 대형화, 복잡화 등으로 토목, 건축, 기계 등의 복합공종으로 구성된 공사들은 공기절감을 위해 패스트트랙(Fast Track) 방식으로 진행되는 사례가 많으며, 패스트트랙 방식에서는 적정 단계구분이 전체 프로젝트의 공기 책정에 중요한 사안이다. 본 연구에서는 복합공종으로 구성된 건설공사가 패스트트랙으로 진행될 때 적용할 수 있는 단계구분 방식을 제시하고 있다. 이를 위해 연구에서는 토목, 건축공사로 구성된 4개의 축구전용경기장 공사를 적용 사례로 분석하여 세분화된 공정분류체계(Work Breakdown Structure, WBS)를 통해 주요 단계별 공정 구분에 의한 일정표를 분석하고, 5가지 시안을 적용하여 패스트트랙 단계구분의 적정성을 분석한다. 분석된 시안중에서 최소 공기를 갖는 시안에 대하여 패스트트랙 단계구분 및 단계별 주요 공정의 구성 모형을 제시하였다. 이러한 방법론은 패스트트랙이 적용되는 유사한 규모의 대형 복합공사에서 패스트트랙 적용 시에 적정 단계 구분과 단계별 공정 구성 체계에 활용성을 가질 수 있다.

• 건축역사연구
• /
• 제19권3호
• /
• pp.7-29
• /
• 2010

The form of the Wangheungsa Temple's wooden pagoda site is that of the traditional form of the wooden pagodas constructed during the Baekjae Period. Likewise, it is an important ruin for conducting research on the form and type of the wooden pagodas constructed during the Baekjae Period. In particular, the method used for the installation of the central pillar's cornerstone is a new technique. The purpose of this research is to restore the ruin of the Wangheungsa Temple's wooden pagoda of the Baekjae Period that remains at the Wangheungsa Temple's wooden pagoda site. Until now, research conducted on the wooden pagoda took place mostly centered on the Hwangryongsa Temple's wooden pagoda. Meanwhile, the reality concerning Baekjae's wooden pagoda is one in which there were not many parallel cases pertain to the design for restoration. This research paper wants to conduct academic examination of the Wangheungsa Temple's wooden pagoda to organize the intention of design and design process in a simple manner. This research included review of the Baekjae Period's wooden pagoda related ruins and the review of the existing wooden pagoda ruin to analyze the wooden pagoda construction technique of the era. Then, current status of the Wangheungsa Temple's wooden pagoda site is identified to define the characteristics of the wooden pagoda, and to set up the layout format and the measure to estimate the size of the wooden pagoda in order to design each part. Ultimately, techniques and formats used for the restoration of the wooden pagoda were aligned with the wooden pagoda of the Baekjae Period. Basically, conditions that can be traced from the current status of the Wangheungsa Temple site excavation using the primary standards as the standard. Wangheungsa Temple's wooden pagoda was designed into the wooden pagoda of the Baekjae's prosperity phase. The plane was formed into $3{\times}3$ compartments to design into three tier pagoda. The height was decided by factoring in the distance between the East-West corridors, size of the compartment in the middle, and the view that is visible from above the terrace when entering into the waterway. Basically, the origin of the wooden structure format is based on the Goguryeo style, but also the linkage with China's southern regional styles and Japan's ancient wooden pagoda methods was factored in. As for the format of the central pillar, it looks as if the column that was erected after digging the ground was used when setting up the columns in the beginning. During the actual construction work of the wooden pagoda, central pillar looks as if it was erected by setting up the cornerstone on the ground. The reason that the reclaimed part of pillar that use the underground central cornerstone as the support was not utilized, was because the Eccentric Load of the central pillar's cornerstone was factored in the state of the layers of soil piled up one layer at a time that is repeated with the yellow clay and sandy clay and the yellow clay that were formed separately with the $80cm{\times}80cm$ angle at the upper part of the central pillar's cornerstone was factored in as well. Thus, it was presumed that the central pillar was erected in the actual design using the ground style format. It is possible to presume the cases in which the reclaimed part of pillar were used when constructed for the first time, but in which central pillar was installed later on, after the supplementary materials of the underground column is corroded. In this case, however, technique in which soil is piled up one layer at a time to lay down the foundation of a building structure cannot be the method used in that period, and the reclamation cannot fill up using the $80cm{\times}80cm$ angle. Thus, it was presumed that the layers of soil for building structure's foundation was solidified properly on top of the central pillar's cornerstone when the first wooden pagoda construction work was taking place, and that the ground style central pillar was erected on its upper part by placing the cornerstone once again. Wangheungsa Temple's wooden pagoda is significant from the structure development aspect of the Korean wooden pagodas along with the Hwangryongsa Temple's wooden pagoda. Wangheungsa Temple's wooden pagoda construction technique which was developed during the prosperity phase of the Baekjae Period is presumed to have served as a role model for the construction of the Iksan Mireuksa Temple's wooden pagoda and Hwangryongsa Temple's wooden pagoda. With the plan to complement the work further by excavating more, the basic wooden pagoda model was set up for this research. Wangheungsa Temple's wooden pagoda was constructed as at the Baekjae Kingdom wide initiative, and it was the starting point for the construction of superb pagoda using state of the art construction techniques of the era during the Baekjae's prosperous years, amidst the utmost interest of all the Baekjae populace. Starting out from its inherent nature of enshrining Sakyamuni's ashes, it served as the model that represented the unity of all the Baekjae populace and the spirit of the Baekjae people. It interpreted these in the most mature manner on the Korean peninsula at the time.

• 한국건설관리학회논문집
• /
• 제13권5호
• /
• pp.103-112
• /
• 2012

최근 우리나라가 선진국대열에 들어서고 생활수준이 높아지면서 건설 산업에서는 높은 인건비와 노무자의 부족으로 인해 외국인 노동자의 비중이 점차 늘어나고 있는 실정이다. 모듈러 공법은 전체공정의 50%~90%를 공장에서 제작하여 이것을 운반한 후 현장에서 설치하는 공법으로 현장에서 공정을 최소화하여 공기를 단축하고 품질을 향상시킬 수 있으며, 현장 공기의 단축으로 인건비 절감에 효과적이다. 현재 국내 모듈러는 2003년 신기초등학교를 시작으로 군 병영시설에 확대 적용되고 있지만 모듈러 공법의 장점인 짧은 공사기간과 낮은 비용의 제작은 이루어지지 않는 실정이다. Toyota 자동차 생산방식인 컨베이어시스템 방식을 모듈제작공정에 도입함으로써 자동화생산과 시간, 인력의 소모량을 크게 단축할 수 있고 이에 따라 생산 비용과 품질, 공기 향상으로 시장의 활성화를 기대할 수 있다. 따라서 본 연구는 실제 국내 모듈러 공법 프로젝트를 통하여 공장생산방식의 문제점 해결을 위해 컨베이어시스템 적용방법을 제시하고 적용한 컨베이어시스템의 수익성 분석을 하고자 한다. 제작 모듈의 형태에 따라 다르지만 본 연구의 실험모듈을 기준으로 일일 생산량 7.36개를 기준으로 투자 회수 기간까지 20개월이 소요 된다.

• Wind and Structures
• /
• 제26권4호
• /
• pp.191-204
• /
• 2018

This article presents a study of the largest-ever (height = 220 m) cooling tower using the large eddy simulation (LES) method. Information about fluid fields around the tower and 3D aerodynamic time history in full construction process were obtained, and the wind pressure distribution along the entire tower predicted by the developed model was compared with standard curves and measured curves to validate the effectiveness of the simulating method. Based on that, average wind pressure distribution and characteristics of fluid fields in the construction process of ultra-large cooling tower were investigated. The characteristics of fluid fields in full construction process and their working principles were investigated based on wind speeds and vorticities under different construction conditions. Then, time domain characteristics of ultra-large cooling towers in full construction process, including fluctuating wind loads, extreme wind loads, lift and drag coefficients, and relationship of measuring points, were studied and fitting formula of extreme wind load as a function of height was developed based on the nonlinear least square method. Additionally, the frequency domain characteristics of wind loads on the constructing tower, including wind pressure power spectrum at typical measuring points, lift and drag power spectrum, circumferential correlations between typical measuring points, and vertical correlations of lift coefficient and drag coefficient, were analyzed. The results revealed that the random characteristics of fluctuating wind loads, as well as corresponding extreme wind pressure and power spectra curves, varied significantly and in real time with the height of the constructing tower. This study provides references for design of wind loads during construction period of ultra-large cooling towers.

• 한국건설관리학회논문집
• /
• 제7권2호
• /
• pp.71-80
• /
• 2006

건축물이 대형화, 고층화되는 현 상황에서는 재건축의 효용성이 감소되므로 구조물의 수명연장을 위한 콘크리트 품질관리의 체계적인 연구가 필요하다. 콘크리트는 시멘트의 수화 반응에 의해 강도가 발휘되며 온도에 따른 품질변화가 매우 큰 재료로서 한중과 서중 같은 시공환경에서 품질문제가 많이 유발된다. 특히 서중환경에 대해서는 콘크리트 표준시방서와 현장별 특기시방서 및 시공계획서 등으로 현장을 관리하고 있으나, 이에 대한규정이 명확하지 않아 현장별로 뚜렷한 기준 없이 임의로 시공되어 품질이 일정하지 않고 각종 하자가 발생하는 실정이다. 이에 서중 환경이 콘크리트의 시공환경과 어떤 관련성이 있는지에 대해 전국 8개 대도시의 기상자료를 중심으로 적용기간과 일수를 조사하고 분석한 결과 대구가 가장 긴 지역으로 판명되었다. 따라서 이 지역의 콘크리트 양생공정에 대한 현장 품질관리 실태를 조사하여 품질관리상 문제점을 파악하고, 그 해결방안이 될 기초 자료를 도출하였다. 또한, 서중 콘크리트 시공에 있어 현장별로 상이하게 적용되고 있는 양생공정의 품질관리 기준을 통합하여 균일한 품질 확보와 하자발생을 줄이기 위해 현장에서 가장 시급히 보완되어야 할 부분에 대한 현장시험과 품질관리 항목의 분석을 통하여 서중 환경시 양생공정의 시공지침과 시공계획서 작성에 필요한 콘크리트 품질관리에 관하여 연구한 논문이다.

• 한국강구조학회 논문집
• /
• 제18권5호
• /
• pp.643-654
• /
• 2006

본 연구에서는 iTECH 합성보 실험체에 대한 온도와 변형에 대한 내화성능을 ISO834 표준화재와 BS476-20 및 KSF2257 기준에 근거하여 평가하였다. 국내외적으로 복합구조의 내화성능을 규명하기 위한 연구는 지극히 미흡한 실정이며, 따라서 본 연구에서는 iTECH 합성보의 내화성능을 평가하기 위해 1.5m의 슬래브를 포함한 4..7m의 스팬길이에 대하여 실험을 수행하였다. 변수는 실험체의 단면크기, 피복재 보강방법과 보강두께, 그리고 하중비로 하여 내화실험을 수행하였다.

• 지질공학
• /
• 제10권2호
• /
• pp.79-97
• /
• 2000

우리나라의 최근 지진발생 추이를 보면 본격적인 게기지진관측을 시작한 1978년부터 1982년까지는 활성기 라 할 수 있으며 1983년부터 1991년까지는 조용하다가 1992년부터 지진발생 횟수가 크게 증가하는 것으로 나타나고 있다. 한편 우리나라의 계기지진관측은 1905년 일본에 의하여 시작되었는데 1943년까지 관측이 되다가 행방과 동란 등 사회적 격동기를 거치면서 관측이 중단되었다. 그후 1963년에 세계표준지진관측망의 설립에 의해서 관측이 재개되었는데 1978년 홍성지진을 계기로 본격적인 지진관측시대가 시작되었다. 기상청은 24시간 지진 및 지진해일 감시체계를 구축 운영하고있는데, 1997년부터 새로운 국가 지관측망 구축사업을 추진하고 있다. 이 사업의 결과 현재 지진관측망 27소, 가속도관측망 42소, 지진분석시스템과 수위측정계등을 설치 운영되고 있다. 앞으로 2001년까지 이를 더욱 확장하여 지진관측망을 31소로, 가속도관측망을 75소로 증성할 계획을 추진중이다.

• 한국소음진동공학회논문집
• /
• 제22권12호
• /
• pp.1250-1256
• /
• 2012

Resilient materials are used to reduce the floor impact sound in apartment buildings. Since an on-dol layer is installed in the resilient materials' upper part, thickness deformation can be occur in the resilient material. It is necessary to check a thickness deformation grade for a long period of time. In this research, we measured thickness deformation over 400th day to the resilient materials(EPP, EPS, EVA) which is used in Korea. Although there was a difference according to the kind of measurement test specimens, it became clear that thickness was decreases as to time increased. The thickness deformation grade of ten years after was calculated based on the thickness measurement result. Compare with the calculated result and result of ISO 20392. Larger thickness deformation occurred in the measurement result of these research findings compare with the ISO standard.