• 한국산림과학회지
• /
• 제109권4호
• /
• pp.477-483
• /
• 2020

본 연구는 남부지방 대표수종인 편백 현실림의 생장 특성을 반영한 수확표를 작성하기 위하여 수행되었다. 200개소 이상의 편백의 표준지 생장조사 자료를 분석에 이용하였다. 기존의 임분수확표 작성 절차인 직경분포의 추정, 적합, 예측의 단계를 거쳤으며, 직경분포모델은 Weibull 함수를 이용하였다. 임지생산력을 평가하기 위한 기준인 지위지수(기준임령 30년)는 Chapman-Richards식을 이용하여 추정하였다. 임분수확표 작성을 위한 평균직경 등 여러 추정식은 적합도를 고려하여 최적의식을 선정하고 이용한 결과, 조사된 편백 현실임분의 지위지수는 10~18 범위에 있음이 밝혀졌다. 추정된 임분재적 모델은 편백림의 임분재적에 대해 62%의 설명력을 가지는 것으로 나타났다. 실재적과 추정재적 간의 잔차도분석 결과 '0'을 중심으로 모두 고른 잔차를 보여 본 추정 결과를 이용함은 문제가 없을 것으로 판단되었다. 이번 남부지방을 대표하는 침엽수인 편백에 대한 임분수확표 작성 결과가 현실의 산림경영에 폭넓게 사용되기를 바라며, 향후 편백 임분 생장이 더욱 안정화되고 생육발달로 장벌기 대경재 생산지가 많이 확보되면 더욱 개선된 수확표의 작성도 가능할 것으로 기대된다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.183.1-183.1
• /
• 2010

Recently, the increased interest in environmental issues has led to extensive research for development of green energy generation systems. However, only one type of generation system may not be sufficient for stand-alone mode because it cannot cope with the irregularity of weather condition. A hybrid generation system is able to make up for the weakness of each system. In this paper, a stand-alone hybrid wind/PV system is developed that can guarantee the stable energy supply. The system is suitable for power supply under 50W, and a vertical savonius type of blade was designed and applied for the wind generation system.

• Tribology and Lubricants
• /
• 제19권2호
• /
• pp.102-108
• /
• 2003

The height of laser bumps has been considered as the limit of the minimum flying height in the contact start-stop (CSS) of hard disk drives. In this paper, tribological interactions at flying height under laser bumps are investigated in a spin stand for development of ultra-low flying head-disk interface. With the reduction of the spinning speed in a spin stand, the flying height is decreased under the height of laser bumps and, then, head-disk interactions are investigated using AE and stiction/friction signals. During seek tests and 20000 cycle-sweep tests, AE and stiction/friction signals are not significantly changed and there are no catastrophic failures of head-disk interface. Bearing analysis and AFM analysis show that there are signs of wear and plastic deformation on the disks. It is suggested that flying height could be as low as and, sometimes, lower than laser bump height.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.142-149
• /
• 2000

The results of stand and field testing of a combustion chamber for a heavy-duty 150 MW gas turbine are discussed. The model represented one of 14 identical segments of a tubular multican combustor constructed in the scale 1:1. The model experiments were executed at a pressure smaller than in the real gas turbine. The combustion efficiency, pressure loss factor, pattern factor, liner wall temperature, flame radiation, fluctuating pressure, and NOx emission were measured at partial and full load for both model and on-site testing. The comparison of these items of information, received on similar modes in the stand and field tests, has allowed the development of a method of calculation and the improvement of gas turbine combustors.

• Journal of Mechanical Science and Technology
• /
• 제15권9호
• /
• pp.1319-1327
• /
• 2001

The results of stand and field testing of a combustion chamber for a heavy-duty 150 MW gas turbine are discussed. The model represented one of 14 identical segments of a tubular multican combustor constructed 1:1 scale. The model experiments were executed at a lower pressure than that in a real gas turbine. Combustion efficiency, pressure loss factor, pattern factor, liner wall temperature, flame radiation, fluctuating pressure and NOx emission were measured at partial and full loads for both model and on-site testing. The comparison of these items in the stand and field test results led to has the development of a method of calculation and the improvement of gas turbine combustors.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 추계학술대회 논문집
• /
• pp.206-209
• /
• 2003

This paper deals with stand-alone PV power generation system with charge and discharge controller for the LED road sign. Main power source of PV system are generally solar cell and battery. Therefore PV system can be classified into variable types in accordance with connection type between battery and solar sell. Mainly used on of them is direct connection type which has advantage such as simple structure and simple controller. To verify the proposed PV generation system for the LED road sign, the detail simulation and experiment results indicate that operating characteristics are verified by experiment with a laboratory prototype in this paper.

• 패션비즈니스
• /
• 제9권2호
• /
• pp.143-159
• /
• 2005

This study was done to provide basic data for clothing design and thus to contribute to the academic development at the clothing and textile area and collar roll line lay down angle variation at collar width on the open collar. The study was composed as tallows: 1. The variation at collar outer wall size increase collar roll line lay down angle size the more Increase. 2. The outer wall and stand height size increase aware at variation collar width at the more Increase. It is desirable that this study will be at help to enchancement of life style in garments and promotion of garments industury by developing the archetype basic collar pattern suitable to Korean women's garments.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.434-441
• /
• 2003

This paper presents a generator for stand-alone vibration monitoring system of bridge structure based on ambient vibration of bridge. In this paper, a novel electric power generator which has minimum effect of armature reaction is proposed. The related mechanical and electrical design equations are obtained and a pilot generator has been implemented. In addition, the charging system for extremely low generator current is discussed, and some improvements are identified for the system. This investigation reveals that diode characteristics of rectifier is dominant factor in the charging process. Finally, both the simulation, which uses real measurement data of the Namhae bridge as input of the pilot generator, and indoor test are carried out. The results showed the applicability and effectiveness of the stand-alone vibration powered generator.

• 한국산업융합학회 논문집
• /
• 제26권1호
• /
• pp.27-34
• /
• 2023

This study conducted a study on a small-capacity PCS using lithium-ion batteries used in personal mobility. Most of the batteries in Personal Mobility only charge with external chargers and are used only as mobile energy sources. However, this paper aims to charge the battery of PM using PV and system power or to use the charged power as a stand-alone power supply. The developed PCS can be operated as a two-channel battery charger/discharger, a battery charger using solar power, and a stand-alone solar inverter depending on the operation method. The validity of the manufactured small-capacity PCS was verified through experiments.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제5B권3호
• /
• pp.289-295
• /
• 2005

Instrumentation and Control (I&C) of the Neutral Beam Test Stand (NB- TS) Facility at the Korea Atomic Energy Research Institute (KAERI) for the Korea Superconducting Tokamak Advanced Research (KSTAR) project has been underway since the start of the project to answer the diverse requests arising from the various facets of the development and construction phases of the project. Optical signal transmission constitutes a significant portion of I&C works and has been performed for the entirety of the project. During the NB- TS construction and related experiments, significant achievements to a more accurate as well as more refined optical signal transmissions have been made. Examples of those I&C works that utilized the optical signal transmission are the Langmuir probe signal transmission, gradient grid current signal transmission, gas flow control and signal transmission, ion source temperature measurement, beam line component temperature monitoring, and coolant flow signal transmission, etc. These optical signal transition provisions are now performing part of the indispensable functions for the proper operation of the NB- TS facility. Attained experience and expertise are expected to be well applied to the upcoming main neutral beam injection (NBI) system construction for the KSTAR project.