• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.4
• /
• pp.353-358
• /
• 2008

The purpose of this study was to examine the effects of black polyethylene film mulching and soil conditioners on the growth, yield, and flavonoids biosynthesis of mungbeans. The seedling stand rate, plant height, and pods per plant were 98%, 61 cm, and 15.1, respectively, when the mungbean grown black polyethylene film mulches. They were greater than these results when the without mulches was applied by 13%, 9 cm, and 1.8, respectively. Mungbean grown with black polyethylene film mulches ($243\;kg{\cdot}10a^{-1}$) exhibited 38% more seed yield than without mulches ($176\;kg{\cdot}10a^{-1}$). However, no significant difference in contents of vitexin and isovitexin of mungbeans between with black polyethylene film mulches and without mulches was observed. Among soil conditioners, standard fertilizer+oil cake and standard fertilizer+mineral powders increased number of pods. The standard fertilizer+oil cake showed the highest seed yield (119%) of mungbean when it mixed with standard fertilizers, and followed by mineral powders (115%). The mixed combinations of oil cake or mineral powders also seem to have affected the biosynthesis of vitexin and isovitexin, whose content in mungbeans was significantly more.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.4
• /
• pp.444-451
• /
• 1999

The effect of individual density on the growth and survival of Laminaria japonica was experimentally evaluated. Four density treatments of young sporophytes (0.63 cm In maximum length) grown in the laboratory were transplanted to the southeastern coast of Korea and their survivorship and growth rate were measured twice a month from January to July, 1996. Plants showed higher survivorship at low density. Final densities at three lowest densities were similar, ranging from 34 to 38 inds${\cdot}100 cm^{-2}$. Planis at the highest density, however, suffered greater decline than at lower densities, and only 21 plants remained at the end of this study. Mean frond size (length and width) fluctuated throughout the study period at four densities. During the first two mouths after outplanting, mean frond size was negatively correlated with initial density, However, the size was density independent after three months. As stand density increased, size-frequency distribution through time tended to be more positively skewed. The 10 largest plants grew faster in frond size and attained larger size in the lower density. There was a positive relationship between plant size and relative growth rate (or survival). The slope of yield-density (Y-D) relationships at four densities ranged from -0.060 to -0.137. The study suggests that density can strongly affect the survival and growth of this alga. The density-dependent survival and growth patterns, however, were not strictly consistent with those of terrestrial plants.

• Ecology and Resilient Infrastructure
• /
• v.8 no.2
• /
• pp.97-111
• /
• 2021

This study was conducted to develop a habitat type classification system and its map based on the ecological characteristics of species, spatial type, vegetation, topography, and geological conditions preferred by species. To evaluate the relationships between species and their habitats in Korean national parks, we prepared a classification standard table for systematic classification of habitat types. This classification system divides habitats into 6 low-level and 59 mid-level ecological classes based on habitat structure. The mid-level system divided forest ecosystems into 20 subtypes, stream and wetland ecosystems into 8 types, coastal ecosystems into 7 types, arable land into 6 types, development land into 9 types, and 1 type of marine ecosystem. A habitat classification map was drawn utilizing square images, detailed vegetation maps, and forest stand maps, based on the above habitat classification system, and it covered 1,461 plots spanning 21 national parks. The habitat classification system and survey protocol, which consider domestic habitat conditions, should be further developed and applied to habitat assessment, to enhance the utility of this study.

• 한국사회정책
• /
• v.25 no.1
• /
• pp.71-96
• /
• 2018

Globalization, deindustrialization, and the revolutionary development of technology has led to the concerns that existing social policies might not be fit for the current and upcoming society. At the same time, the idea of universal basic income has drawn significant attentions as the alternative to the old welfare state. There are pros and cons of basic income, and scholars of both sides stand against each other with their equivalently strong logics. In this situation, some governments have planned or conducted field experiments in order to estimate the causal effects of basic income. This study explores the Finnish and Dutch basic income experiments in methodological perspective. All the World have been watching the experiments in these two countries with keen interest. The results of these experiments will surely influence on the pros and cons of basic income in numerous countries, including South Korea. It is important to precisely figure out the methodological meanings and limitations of the experiments, for the experiments in both countries deal with only some partial components of basic income and have been exposed to many threats to internal validity. Therefore, scholars for and against basic income should be careful in interpreting the findings from these experiments. This study elucidate the methodological meanings and limitations of the Finnish and Dutch basic income experiments. Furthermore, this study extracts some lessons from these experiments that would be useful if scholars would have an opportunity to design and conduct a basic income experiment in South Korea.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.4
• /
• pp.423-432
• /
• 2019

Along with an increase in marine activities every year, the frequency of marine accidents is on the rise. Accordingly, various research activities and policies for marine safety are being implemented. Despite these efforts, the number of accidents are increasing every year, bringing their effectiveness into question. Preliminary studies relying on annual statistical reports provide precautionary measures for items that stand out significantly, through the comparison of statistical provision items. Since the 2000s, large-scale marine accidents have repeatedly occurred, and case studies have examined the "accident response." Likewise, annual statistics or accident cases are used as core data in policy formulation for domestic maritime safety. However, they are just a summary of post-accident results. In this study, limitations of current marine research and policy are evaluated through a literature review of case studies and analyses of marine accidents. In addition, the ontology of the marine accident information classification system will be revised to improve the current limited usage of the information through an attribute analysis of boating accident status reports and text mining. These aspects consist of the reporter, the report method, the rescue organization, corrective measures, vulnerability of response, payloads, cause of oil spill, damage pattern, and the result of an accident response. These can be used consistently in the future as classified standard terms to collect and utilize information more efficiently. Moreover, the research proposes a data collection and quality assurance method for the practical use of ontology. A clear understanding of the problems presently faced in marine safety will allow "suf icient quality information" to be leveraged for the purpose of conducting various researches and realizing effective policies.

• Ocean and Polar Research
• /
• v.41 no.3
• /
• pp.169-181
• /
• 2019

The purpose of this study is to develop geochemical tracers to identify a specific source desert of mineral dust in China using the published data. In addition, we tested the applicability of these tracers to wet-deposits and soil samples collected in Jeju, Korea. Because of similarity in trace elemental compositions of mineral dust from the major arid regions in China, such as Taklimakan, West Ordos (Badain Jaran), East Ordos (Mu Us and Hobq), East Northern China (Horqin), West Northern China (Gurbantunggut), and Chinese Loess Plateau, there has been limited to the use of geochemical data for source identification. Here we propose the four (4) plots using combination of seven (7) geochemical variables as a source indicator to distinguish one from other source regions in China: $\frac{Y}{Tb_N}$ vs. $\frac{Th}{{\Sigma}REE_N}$, $\(\frac{La}{Gd}\)_N$ vs. $\frac{Y}{{\Sigma}REE_N}$, $\frac{Th}{Tb_N}$ vs. $\frac{Y}{Nd_N}$, and $\frac{Th}{Tb_N}$ vs. $\(\frac{Ce}{Ce}\)_N^*$, where $_N$ and $\(\frac{Ce}{Ce}\)_N^*$ stand for values normalized to Post-Archean Average Shale composition and Ce anomaly, respectively. Mineral dusts from aforementioned six major deserts are distinguished one from the others by the combined use of these variables. Jeju rock and soil samples form a separate domain from Chinese mineral dusts in all four plots. In contrast, most of Jeju dust samples were comparable with the West Ordos desert (Badain Jaran) domain, indicative of strong influence of Badain Jaran dust in Jeju in spring season when the mineral dust was collected. A weak positive Ce anomaly in Jeju samples implies minimal local contribution. Our study suggests that the combination of $\frac{Y}{Tb_N}$ vs. $\frac{Th}{{\Sigma}REE_N}$, $\(\frac{La}{Gd}\)_N$ vs. $\frac{Y}{{\Sigma}REE_N}$, $\frac{Th}{Tb_N}$ vs. $\frac{Y}{Nd_N}$, and $\frac{Th}{Tb_N}$ vs. $\(\frac{Ce}{Ce}\)_N^*$ can be used to identify a specific source region of mineral dust in China as well as Jeju mineral particles.

• Journal of Korean Society of Forest Science
• /
• v.107 no.4
• /
• pp.402-411
• /
• 2018

This study was conducted to develop ingrowth estimation equations on Pinus densiflora found in Gangwon Province and in the center of Korean Peninsula, based on the National Forest Inventory (NFI)'s permanent sampling plot data. For this study, identical sampling plots in $5^{th}$ and $6^{th}$ NFI data were collected in order to identify ingrowth amounts for the last 5 years. Following two-stage approaches in developing the ingrowth estimation equations, the logistic regression model was used in the first stage to estimate the ingrowth probability. In the second stage, regression analysis on sampling plots with ingrowth occurrence was used to estimate the ingrowth amount. A candidate model was finally selected as an optimal model after a verification based on three evaluation statistics which include mean difference (MD), standard deviation of difference (SDD) and standard error of difference (SED). In results, a logistic regression model based on the number of sampling plot which did not result in ingrowth (model VI), was selected for an ingrowth probability estimation equation and exponential function including the species composition (SC) variable was optimal for an ingrowth estimation equation (model VII). The ingrowth estimation equations developed in this study also evaluated the estimation ability in various forest stand conditions, and no particular issue in fitness or applicability was observed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.2
• /
• pp.189-200
• /
• 2019

Korean seafarers have played a key role throughout the country's history and economic development. They have been a major source of foreign remittance into the nation as well as a pivotal sector in emergency logistics during war times. However, the current number of Korean seafarers in decreasing due to low job attractiveness and retention rate onboard. This is a major problem for the national and international shipping industry as youth seem not to be interested in working onboard for long periods of time. The purpose of this study is to 1) determine what the public opinion about seafarers in Korea is and 2) find out what factors mostly stand out in the public opinion about seafarers profession. The paper suggests that three main types of opinion groups emerged. The first type is labeled as 'high risk, high workload and high stress' as respondents recognized a high possibility of accident onboard and, at the same time, acknowledged that seafarers can be fatigued and stressed. The second type was named as 'Dangerous, Dirty, Difficult', as seafarers' image was mainly associated to fishing vessels and not to merchant and passenger ships. The third type recognized that the social position of the seafarers was low due to 'low social recognition'. The study suggests that all three types have a negative image of seafarers' job. Based on the results of this study, it is necessary to establish various policies and marketing tools to improve the negative job image linked to seafarers by the public opinion. If the public image of seafarers can be improved and attractiveness rose, it is expected a higher number of seafarers will pursue and keep a career at sea.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.30 no.1
• /
• pp.77-99
• /
• 2019

In this study, development directions for smooth introduction of transferring non-specialized libraries to specialized libraries are suggested based on the analysis conducted on non-specialized library librarians and users to investigate and analyze the comparative requirements for specializing libraries, specialization topics, demand for spaces and programs for specialization and view of important factors of each area when operating specialized libraries in future. As a result, first, when introducing a specialized library, it is necessary to derive a specialized topic that can identify and provide the characteristics of the region and the status of existing library. And a demand analysis. Based on this, the subject should be selected through the demand survey of the local residents. Second, from the stand point of targeted subjects of specialized service, it is necessary to provide tailored services by understanding the service range for each age group based on local population distribution and library user analysis. Third, experience-type, lecture-type and view-type can be suggested for specialized programs, considering the characteristics of the specialized subject field. It is ideal to operate combination of the three based on the subject filed details. Also, the characteristics of the subject and the types of program should be considered for specialized spaces. Finally, in order to systematically operate and promote specialized libraries, allocating dedicated personnel, linking with other institutions and strategies of promotion and marketing should be considered.

• KEPCO Journal on Electric Power and Energy
• /
• v.5 no.3
• /
• pp.135-140
• /
• 2019

Lattice towers and tubular steel poles have been commonly used for electrical power transmission in Korea. They are durable, structurally stable, simple and can easily be constructed in limited spaces. However, residents are opposed to construct transmission lattice towers in their areas because they are not visually attractive, and electrical field occur at the transmission lines. Underground transmissions have been used instead of the traditional towers to resolve these problems, however they are not cost effective to construct and run. Therefore, we have developed eco-friendly towers that are more attractive, well blending into the surrounding environment, and much more economical than underground transmissions. There are four categories of the eco-friendly electric transmission towers about design aspects. Firstly, there is decoration type such as tree tower and ensemble tower. Tree tower looks like actual trees with leaves and branches so it blends into surroundings. Ensemble towers were designed after pair of crane birds. Those towers have decoration features and art works. Structural examination and manufacturing this type would be very similar to the conventional transmission towers. Secondly, there is arm design type such as traditional tower. Design features are added to the existing towers. As partial design can be adoptable on these types, it can easily meet height regulations and attach to conventional lattice towers and tubular steel poles. Also, these towers are more economical than others. Third category is multipurpose type such as Sail Tower. These towers have simple pole or tubular structure with features which can be used as information message board, public relations and much more. This type will face greater wind pressure because of the area of the board, also visibility must take into consideration. Lastly, there is moulding type such as arc pylon. It is different shape to the conventional towers - lattice towers and tubular steel poles. Dramatic design changes have been adapted - from a hard and static tower to a soft and curved tower. These towers will well stand out in the field. However, structural examination and manufacturing this type would be difficult and costly. Also certain towers of this type would require scaffolding or false work to construct, which will result in limitations of the construction area. This paper shows KEPCO 154 kV Sail tower in detail. KEPCO 154 kV Sail tower that is included in fabrication of sample tower and tower testing has developed and the results are presented in this paper. We hope that sail tower is also considered as a solution to have public acceptance or to create a familiar atmosphere among towers and people in coastal area.