• 한국환경과학회지
• /
• 제15권1호
• /
• pp.21-31
• /
• 2006

Aquatic plants grow in water with photosynthesis and purify water quality as taking organic and inorganic matter in water. Polluted water in stagnant stream channel where nutritive salts load is great can be purified by activities of aquatic plants. Aquatic plants should be fixed to bed easily to plant and sustainable environment is needed. So in this study, Mattress/Filter system is suggested to plant aquatic plant in stagnant stream channel. In the result of study, coverage of Phragmites australis, Zizania latifolia and Typha angustifolia which planted in mattress was $78\%,\;62\%\;and\;82\%$ and numbers of species in each mattress system were 7, 11, 3. The evenness index of each mattress system was 0.86, 0.91 and 0.79 and diversity index of each mattress system was 1.67. 2.18 and 0.87. Removal rates of phosphorus at Phragmites australis, Zizania latifolia and Typha angustifolia which planted in mattress were $68.7\%,\;62.7\%,\;55.3\%$ and removal rates of nitrogen of them were $79.8\%,\;74.7\%,\;64.9\%$. The removal rate of nitrogen was greater than phosphorus at all system and both removal rates were greater at Phragmites australis than at Zirania latifolia and at Typha angustifolia the rate was the least. Removal rates of $PO_4^{-3},\;NH_4-N,\;NO_{3-}N$ at Phragmites australis were $57.4\%,\;52.8\%,\;47.8\%$ and at Zizania latifolia were $82.6\%,\;77.2\%,\;67.5\%$ and at Typha angustifolia were $80.6\%,\;73.7\%,\;64.3\%$. It seems that removal effect is great by the planted mattress system.

• 대한환경공학회지
• /
• 제32권1호
• /
• pp.23-32
• /
• 2010

정체수역에서는 자연적 흐름의 차단으로 인해 자정능력이 떨어지며, 영양염류의 축적으로 인해 부영양화와 같은 문제점이 발생한다. 또한 비점오염물질의 유입은 정체수역 내 난분해성 물질을 증가시킨다. 본 연구에서는 정체수역의 수질개선을 위해 무산소조, 호기1조, 호기2조로 구성된 장치형 상향류 활성탄 생물막 반응기를 도입하여 정체수의 연속적 순환에 따른 오염물질 농도의 변화를 모니터링 하였다. 정체수역을 모사하기 위하여 $2m^3$의 저장탱크에 유원지의 호소수를 저장하였으며, 수질개선을 위한 최적 유입 유량을 산출하기 위하여 HRT가 6 hr, 4 hr, 2 hr 가 되도록 호소수의 유입 유량을 변화시켰다. 이 가운데 HRT 4 hr에서 SS, $BOD_5$, $COD_{Mn}$, $COD_{Cr}$, TN, TP의 제거 효율이 각각 69.8, 83.0, 91.3, 74.1, 74.7, 88.9%로 가장 좋은 수질 개선 효과를 얻을 수 있었다. 이에 HRT를 4 hr로 고정하고 골프장 연못수를 운전했을 때 SS, $BOD_5$, $COD_{Mn}$, $COD_{Cr}$ TN, TP의 제거 효율이 각각 78.5, 78.0, 80.2, 74.9, 55.6, 97.5% 달성되었다. 각 조건에서의 미생물 군집 변화를 PCR-DGGE를 사용하여 분석 결과, 유입수를 골프장 연못수로 교체함에 따라 미생물 군집에 변화가 나타났다. 또한 FISH에 의해 유입 유량 변화에 따른 질산화 미생물량의 변화를 관찰한 결과, HRT 4 hr의 조건에서 질산화 미생물이 가장 우점화됨을 알 수 있었다. 미생물량 및 INT-DHA를 이용한 미생물 활성도 실험 결과, HRT를 낮게 유지하였을 때에도 감소되지 않았다. 따라서 상향류 활성탄 생물막 공정을 정체 수역의 효과적인 수질 개선에 충분히 적용할 수 있을 것으로 기대한다.

• 설비공학논문집
• /
• 제16권4호
• /
• pp.324-331
• /
• 2004

Particle Image Velocimetry (PIV) measurements have been carried out to investigate the pulsatile flow characteristics in a triangular grooved channel. The results showed that a vortex was generated at the tip of the groove and flowed into the groove rotating inside during the acceleration phase of the main stream promoting the mixing of the fluid. Then, at the deceleration phase of the main stream, the vortex entrained fluid from the relatively slow moving main stream to grow bigger than the groove size. Finally the vortex was ejected to the main stream carrying the fluid away from the groove, resulting in the enhancement of mixing between the stagnant fluid in the groove and the main stream in the channel. It was found that the fluid mixing enhancement is maximized when the pulsatile period is the same as the time duration which the vortex takes to grow larger enough to fill the groove and to be ejected to the main stream.

• ALGAE
• /
• 제20권2호
• /
• pp.127-132
• /
• 2005

Algal growth potentials were probed by algal growth rates, maximal PSII quantum yields and ATP amount as well as dry weights of algae to evaluate the water fertility due to the algal growth in the stream (CT) and stagnant watershed (WW). Oscillatoria agardhii (CY) and Coelastrum reticulatum (CH) were cultured in nitrogen (N) and phosphorus (P) starvation media (CH-10 medium) and re-inoculated in CT and WW for 7 days. Cell division rates of CY were the highest (k = 7.5) in WW after N starvation, while those of CH were the hight (k = 2.97) in WW after P starvation. The growth of CY was limited by P, while that of CH was by N. Conversely, maximal PSII quantum yields of CH were generally higher than those of CY in CT and WW according to culture time. CY was much more sensibly adapted than CH according to the variations of nutrient amounts in WW. The water fertility was much higher in WW than in CT. The potential assessment tool for water fertility will be able to compensate for the limit of physio-chemical analyses and to be applied as a monitoring system to forecast red-tide.

• Journal of Mechanical Science and Technology
• /
• 제15권12호
• /
• pp.1768-1774
• /
• 2001

Drifting Cups on a Meandering Stream (Kyokusui-no-En) is a Poetry Party that had its origin In ancient China, and was introduced to Japan passing through Korea. The flow of the meandering stream was made clear using the flow visualization techniques, surface floating method, PTV and the numerical simulation. At the same time, the motions of floating cup, the floating speed, relating speed and the trajectory of the cup were also analysed by using an originally developed image processing technique. Based on these researches, the model channel was considered. To make this party interesting the channel must has the characteristic that the drifting cups take the random pass and stagnant at the unexpected place. This model channel is satisfied with these conditions and the fluid mechanics consideration is performed on the both points of the experimental visualization and numerical simulation.

• Environmental Engineering Research
• /
• 제19권4호
• /
• pp.309-316
• /
• 2014

The water quality improvement of golf course ponds, as representative stagnant stream channels, was evaluated by applying a biological activated carbon (BAC) process composed of four consecutive activated carbon reactors. The study was performed from autumn to winter in order to evaluate the feasibility of the BAC process under low temperature conditions. In the study, water quality of pond A (target pond) and pond B (reference pond) were monitored. Pond water was pumped into the BAC process, and was then returned to the pond after treatment. The optimal conditions were determined to be 2 hr of empty bed contact time (EBCT) at a temperature above $4^{\circ}C$, in which improvements of chemical oxygen demand (COD), total nitrogen (TN) and total phosphorus (TP) of pond A compared to pond B were 3.62%, 3.48% and 1.81%, respectively. On the other hand, as the temperature was below $4^{\circ}C$, some degree of water quality improvement was achieved even when EBCT were 1 or 0.5 hr, suggesting that the BAC process can be successfully applied for the improvement of pond water quality in winter months. The values of biomass concentration and microorganism activity in each condition were highest where 2 hr of EBCT was applied at a temperature above $4^{\circ}C$, but values were similar throughout all treatment conditions, and thus, adsorption is considered to be the dominant factor affecting process efficiency. From the denaturing gel gradient electrophoresis (DGGE) results, no significant differences were observed among the activated carbon reactors, suggesting that the number of reactors in the system could be decreased for a more compact application of the system.

• KIEAE Journal
• /
• 제13권1호
• /
• pp.93-100
• /
• 2013

A outdoor space of the brand apartment can improve the quality of the whole environment in apartment and has differentiated identity in apartment housing through various versions of the green space and water space plan. The purpose of this study is to evaluate nature-friendly design characteristics in brand apartments and to offer a basic information for planning of brand apartment. In concrete, nature-friendly design did by green space and water space that can analyze by visual, and investigation contents divided to position, form, user behavior, link space from user viewpoint by case study. This study examined a case of eight brand apartments located in Gangnamgu, Seoul. We has divided the characteristics of a green space into horizontal type, vertical type, multi-dimensional type and has divided the water space into stagnant water type, flowing stream type, waterfall type and fountain type. The findings are summarized as follows: First, in case of the space of brand apartment, the application of horizontal and vertical greenery was lower compare with multi-dimensional green space. The most of items for multi-dimensional greenery have been planned to the open space and promenade. Second, a stagnant water type of water space features well used in most of the cases but a water space of signs of activity like a flowing stream, waterfall, fountain types were underused because of problem of administrative and maintenance expenses. Thirdly, Water space of brand apartments was planned with specialization item by apartment housing but green space does not have differentiated item and was planned by most similar form.

• 대한토목학회논문집
• /
• 제6권2호
• /
• pp.93-101
• /
• 1986

정지수역(靜止水域)에서 연직상향(鉛直上向)으로 방류(放流)되는 평면부력(平面浮力)?의 거동을 연속방정식(連續方程式), 운동량수송식(運動量輸送式) 및 추적물(追跡物) 수송식(輸送式)에 의하여 수치적(數値的)으로 해석한다. 이 해석은 유함수(流凾數)와 과수송식(過輸送式)을 도입하고 Prandtl 난류모형(亂流模型)을 이용하였다. 방류밀도(放流密度) Froude 수(數)가 4~32인인 부력(浮力)?의 발달된 흐름영역(領域)에서 구한 ?중심선의 속도(速度)와 온도변화(溫度變化), ?주변수역(周邊水域)의 온도분포(溫度分布)와 흐름양상은 기존자료와 잘 맞음을 확인할 수 있다. 적분형해석(積分型解析)에 필요한 퍼짐율과 확산비(擴散比)가 방류밀도(放流密度) Froude 수(數)와 방류구(放流口)로부터의 거리의 함수로 유도된다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1995년도 추계학술대회 논문집
• /
• pp.60-63
• /
• 1995

The behavior of the work materials in the chip-tool interface in extremely high strain rates and temperatures is more that of viscous liquids than that of normal solid metals. In these circumstances the principles of fluid mechanics can be invoked to describe the metal flow in the neighborhood of the cutting edge. In the present paper an Eulerian finite element model is presented that simulates metal flow in the vicinity of the cutting edge when machining a low carbon steel with carbide cutting tool. The work material is assumed to obey visco-plastic (Bingham solid) constitutive law and Von Mises criterion. Heat generation is included in the model, assuming adiabatic conditions within each element. the mechanical and thermal properties of the work material are accepted to vary with the temperature. The model is based on the virtual work-stream function formulation, emphasis is given on analyzing the formation of the stagnant metal zone ahead of the cutting edge. The model predicts flow field characteristics such as material velocity effective stress and strain-rate distributions as well as built-up layer configuration

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2006년도 추계학술대회 논문집
• /
• pp.36-41
• /
• 2006

Reverse flow (i.e. flow in the direction opposite to the free stream) inside a channel occurs when an obstruction is placed at certain positions near the near to the channel, placed in another wider channel. In this paper the reverse flow in a duct (diameter D) with an obstruction at the front (which is a disc), is investigated using PIV. The gap g between the obstruction and the entry to the duct is systematically varied and it is found that maximum reverse flow occurs at a g/D value of 0.5. The flow is stagnant around g/D of 1.25 and forward flow occurs for g/D values of 1.5 and above.