• 한국환경보건학회지
• /
• 제34권6호
• /
• pp.439-445
• /
• 2008

The feasibility study for the application of the removal and mineralization of Rhodamine B (RhB) was performed in a batch electrochemical reactor. The electro/UV process was consisted of DSA (dimensionally stable anode) electrode and UV-C or ozone lamp. The experimental results showed that RhB removal by the ozone lamp was higher than that of the UV-C lamp. Optimum current of the electro/UV process was 1 A. The electrochemical, UV and electro/UV process could completely degrade RhB, while a prolonged treatment was necessary to reach a high level RhB mineralization. It was observed that RhB removal in electro/UV process is similar to the sum of the UV and electrolytic decolorization. However, it was found that the COD of RhB could be degraded more efficiently by the electro/UV process (90.2 %) than the sum of the two individual oxidation processes [UV (19.7%) and electrolytic process (50.8%)]. A synergetic effect was demonstrated between the UV and electrolysis.

• 상하수도학회지
• /
• 제22권5호
• /
• pp.551-559
• /
• 2008

An experimental study was carried out to evaluate the potential of flotation process for the secondary clarifier of an activated sludge process. Flotation techniques, applied in this study, include electrofloation (EF) which generated fine bubbles smaller than $35{\mu}m$ in average and diffuser flotation (DF) which generated fine bubbles smaller than $55{\mu}m$ in average. The batch experiments were done with activated sludge displaying various characteristics. It was shown that the efficiency of solids/liquid separation was reduced as the diluted sludge volume index ($DSVI_{30}$) of activated sludge increased. The dependency, however, gradually decreased as the gas to solids (G/S) ratio increased. Thickening efficiency of EF was more than 2~10 times and DF process was more than 1.5~5 times as compared with gravity sedimentation (GS). Stable sludge blanket was maintained regardless of sludge settleability when the G/S ratio was 0.019 in the EF. On the other hand, Serious deterioration in the sludge blanket was observed in the DF depends on G/S ratio and sludge settleability. And For EF and DF, the suspended solids concentration of effluent was not nearly influenced on settleability of activated sludge and more clear than GS. A biological nutrient removal (BNR) process, combined with EF as a secondary clarifier was operated for three months. The mean MLSS (mixed liquid suspended solids) concentration in the reactor and mean solids concentration of return sludge were estimated to be 5,340 mg/L and 16,770 mg/L, respectively. The water quality of effluent was considerably stable and low value was accomplished, that was, standard suspended solids concentration $0.07{\pm}0.51mg/L$ and standard turbidity $1.44{\pm}0.56NTU$. The EF could be applicable for enhancement of efficiency of activated sludge system as well as improvement of the water quality of effluent.

• 한국정보통신학회논문지
• /
• 제16권12호
• /
• pp.2731-2740
• /
• 2012

ASIC(application specific integrated circuit) 과정은 칩을 제작하기 위한 다양한 기술들의 집합이다. 일반적으로 RTL 설계, 합성, 배치 및 배선, 저전력 기법, 클록 트리 합성, 및 테스트와 같은 대표적인 과정들에 대해서는 많은 연구가 진행 되었고, 지금도 많은 연구가 진행 중이다. 본 논문에서는 이러한 ASIC 방법론에서 전력 플랜과 관련하여 경험적이고 실험적인 전력 스트랩 배선(power strap routing) 방법 기법에 대해서 제안하고자 한다. 먼저 수직 VDD 및 VSS와 수평 VDD 및 VSS를 위한 스트랩의 배선을 수행하고, 이 과정에서 발생하는 문제를 해결하기 위한 기법을 제안한다. 배선 가이드를 생성해서 의도하지 않는 배선을 방지하고, 차후를 위해서 배선 가이드에 대한 정보를 저장한다. 다음으로 불필요한 전력 스트랩을 제거하고, 매크로 핀에 대해 미리 배선을 수행한다. 마지막으로 배선 가이드를 이용하여 최종적인 전력 스트랩 배선을 완료한다. 이러한 과정을 통해서 전력 스트랩이 효율적으로 배선되는 것을 확인하였다.

• 상하수도학회지
• /
• 제29권2호
• /
• pp.203-209
• /
• 2015

The purpose of this study is to estimate the applicability of a stable anaerobic digester using a separator membrane to the preprocessing thickening process. The results of the experiments showed about a 47.16% weight loss rate for the sludge under anaerobic condition, and about 41.17% under intermittent aeration condition. The concentrations of rejection water were $SCOD_{Cr}$ 25 mg/L, T-N 16.6 mg/L, and T-P 1.4 mg/L on the average under the intermittent aeration condition, which were lower than the concentrations of rejection water under an anaerobic condition. As for the factors affecting the reduction of the flux, correlation analyses of TTF, MLSS, $SCOD_{Cr}$, and $EPS_{Protein}$, $EPS_{Polysacchride}$ resulted in -0.97, -0.95, -0.84 and -0.86, -0.95, respectively, which showed that TTF had the highest correlation to the reduction of the flux. In addition, it was concluded that MLSS, $SCOD_{Cr}$ and $EPS_{Protein}$, $EPS_{Polysacchride}$ also have close correlations. The results are considered to show that, in the case of the process using a tubular membrane in the preprocessing process of an anaerobic digester, an intermittent aeration condition of the thickener considering the contamination of the membrane and load of rejection water is appropriate for the stable preprocessing process.

• Journal of Mechanical Science and Technology
• /
• 제20권9호
• /
• pp.1449-1458
• /
• 2006

Controlled Auto-ignition (CAI) combustion processes can be broadly divided between a CAI process that is applied to four-cycle engines and a CAI process that is applied to two-cycle engines. The former process is generally referred to as Homogeneous Charge Compression Ignition (HCCI) combustion and the later process as Active Thermo-Atmosphere Combustion (ATAC) The region of stable engine operation differs greatly between these two processes, and it is thought that the elucidation of their differences and similarities could provide useful information for expanding the operation region of HCCI combustion. In this research, the same two-cycle engine was operated under both the ATAC and HCCI combustion processes to compare their respective combustion characteristics. The results indicated that the ignition timing was less likely to change in the ATAC process in relation to changes in the fuel octane number than it was in the HCCI combustion process.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2006년도 추계학술대회
• /
• pp.633-636
• /
• 2006

In order to determine new settings of key process variables optimally, a new rule induction method through a historical data is proposed without using an explicit functional model between process and quality variables. First, a partial least square is used to reduce the dimensionality of the process variables. Then new process settings that yield the best quality variable are identified by sequentially partitioning the reduced latent variable space using a patient rule induction method. The proposed method is illustrated with a case study obtained from steel-making processes. We also show, through simulation, that the proposed method gives more stable results than estimating an explicit function even when the form of the function is known in advance.

• 한국공간구조학회논문집
• /
• 제6권2호
• /
• pp.69-76
• /
• 2006

케이블 돔은 초기에 불안정한 상태에서 각각의 케이블에 장력을 도입하면서 점차적으로 안정화되는 구조이다. 이러한 과정은 케이블에 압축력이 발생하게 되며, 일반적인 구조해석으로는 그 해를 찾을 수 없으므로 이 논문에서는 동적이완법을 사용한다. 또한, 안정화 이행과정해석을 실제적인 문제에 적용하는 방법으로 서울올림픽 체조경기장 케이블 돔 지붕에 적용함으로써 해석결과와 실측결과를 비교하고 안정화 이행과정해석의 적절함을 검증한다.

• Journal of Welding and Joining
• /
• 제21권5호
• /
• pp.513-517
• /
• 2003

Resistance welding processes are widely used in automotive applications. In particular, Mash-Seam resistance welding is typically used in Tailored Blank process. If spot welds are changed to a continuous weld, it's easy to reduce noise and to be more stable in cars. A arc welding, laser welding, seam welding using wheel electrode are available to make continuous welds on a car body, but they demand operator with advanced skills and expensive cost to develop. Therefore, flat electrode continuous mash-seam resistance welding process has been used to improve the weak points in currently available system in lap seam welding. This developed process has much more strength and air tightability, and also has much better plastic workability than laser welding. Moreover, commercial RSW machine can be readily used in this welding process.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2008년도 춘계학술대회
• /
• pp.417-428
• /
• 2008

Designers have to consider voice of customer, process capability, manufacturing standards & condition, manufacturing method, characteristics of products to decide tolerances. Especially, in case of position of hole and pin, designers have to consider process capability to decide tolerances. The traditional position tolerances used in a drawing are theoretical values which are allocated to position under the worst case assembling condition that both hole and pin are the maximum material condition(MMC). However, When the process capability is high, more exact product size can be produced under stable manufacturing condition. larger clearance of hole and pin can be allocated. In this point of view, manufacturer could increase the yield by allocating larger position tolerance than theoretical position tolerance of hole and pin considering process capability.

• 대한안전경영과학회지
• /
• 제11권1호
• /
• pp.75-85
• /
• 2009

Designers have to consider voice of customer, process capability, manufacturing standards & condition, manufacturing method and characteristics of products to decide tolerances. Especially, in case of position of hole and pin, designers have to consider process capability to decide tolerances. The traditional position tolerances used in a drawing are theoretical values which are allocated to position under the worst case assembling condition that both hole and pin are the maximum material condition(MMC). However, when the process capability is high, more exact product size can be produced under stable manufacturing condition. Larger clearance of hole and pin can be allocated. In this point of view, manufacturer could increase the yield by allocating larger position tolerance than theoretical position tolerance of hole and pin considering process capability.