• 한국환경과학회지
• /
• 제1권1호
• /
• pp.35-43
• /
• 1992

Handling the emergency problems such as Chemobyl accident require real time prediction of pollutants dispersion. One-point real time sounding at pollutant source and simple model including turbulent-radiation process are very important to predict dispersion at real time. The stability categories obtained by one-dimensional numerical model (including PBL dynamics and radiative process) are good agreement with observational data (Golder, 1972). Therefore, the meteorological parameters (thermal, moisture and momentum fluxes; sensible and latent heat; Monin-Obukhov length and bulk Richardson number; vertical diffusion coefficient and TKE; mixing height) calculated by this model will be useful to understand the structure of stable boundary layer and to handling the emergency problems such as dangerous gasses accident. Especially, this simple model has strong merit for practical dispersion models which require turbulence process but does not takes long time to real predictions. According to the results of this model, the urban area has stronger vertical dispersion and weaker horizontal dispersion than rural area during daytime in summer season. The maximum stability class of urban area and rural area are "A" and "B" at 14 LST, respectively. After 20 LST, both urban and rural area have weak vertical dispersion, but they have strong horizontal dispersion. Generally, the urban area have larger radius of horizontal dispersion than rural area. Considering the resolution and time consuming problems of three dimensional grid model, one-dimensional model with one-point real sounding have strong merit for practical dispersion model.al dispersion model.

• 제어로봇시스템학회논문지
• /
• 제7권9호
• /
• pp.758-765
• /
• 2001

본 논문에서는 랜드마트 정보 없이 장해물의 위치 정도 지도만 주어졌을 때 스테레오 시작(stereo vision)을 가진 이동로봇이 관측위치와 조명의 변화에도 강인한 시각 특징을 랜드마크로써 추출하는 수법을 제안한다. 장해물의편평한 면사에서 보다 안쪽영역에 존재하는 특징이 관측위치의 변화에 영향을 덜 받기 때문에 안쪽 영역에 존재하는 수직선 세그먼트(vertical line segment) 특징을 랜드마크로 선택한다. 그러나 선택된 특징에서는 로봇의 이동과 관측이 오차에 의해 불확실성(uncertainty)이 포함되어 있기 때문에 추정해야만 한다. 이를 위해 영역기반 스테레오 정합과 특징기반 스테레오 정합법을 이용하여 정합된 특징을 선택하고 확장 칼만필터(Extended Kalman Filter)를 이용여 선택된 특징의 위치, 길이를 추정하여 랜드마크로써 등록한다. 실내 이동환경에서의 실험을 통해 제안된 수법의 유용성을 보인다.

• Journal of Ceramic Processing Research
• /
• 제13권spc2호
• /
• pp.428-432
• /
• 2012

Polyamidimide (PAI)-colloidal silica (CS) nanohybrid films were synthesized by an advanced sol-gel process. The synthesized PAI-CS hybrid films have a uniform and stable chemical bonding and there is no interfacial defects observed by TEM. The thermal degradation ratio of PAI-CS (10 wt%) hybrid films is delayed by 100 ℃ compared with pure PAI sample determined by on set temperature range in TGA. The dielectric constant of PAI-CS (10 wt%) hybrid films decreases with increasing CS content up to about 5 wt% but increases at higher CS content, which is not explained simply by effective medium therories (EMT). The duration time of PAI-CS (10 wt%) hybrid coil is 38 sec, which is very longer than that of pure PAI coil sample. The PAI-CS (10 wt%) hybrid film has a higher breakdown voltage resistance than the pure PAI film at surge environment and exhibits superior heat resistance. The PAI-CS (10 wt%) sample shows the advanced and stable thermal emission properties in transformer module compared with the pure PAI sample. This result illustrates that the advanced thermal conductivity and expansion properties of PAI-CS sample in the case of appropriate sol-gel processes brings the stable thermal emission in transformer system. Therefore, new PAI-CS hybrid samples with such stable thermal emission properties are expected to be used as a high functional coating application in ET, IT and electric power products.

• 대한본초학회지
• /
• 제35권2호
• /
• pp.1-6
• /
• 2020

Objectives : Heating process is the traditional processing method that has been applied to reduce the toxicity of dried resin of Toxicodendron vernicifluum (Anacardiacea) used as Geon-chil (乾漆, Lacca Rhois Exsiccata or Toxicodendri Resina). Urushiol, which is found in the plants of Toxicodendron genus, is a toxic compound that is absorbed into the skin and induces allergic dermatitis by being contacted. Hence, the reduction of urushiol level by heating processing of Geon-chil is crucial method for its medicinal application. Methods : Due to lack of Geon-chil processing-related articles, the articles researching the processing of lacquer (漆), as a coating material, were collected and analyzed to investigate the chemical change of urushiol during heating process. Results : The results demonstrate that the resin which was collected from the sap of T. vernicifluum tree was dried under warm and humid conditions repeatedly. During primary drying process, the laccase, a copper-containing enzyme in the resin, participated in the formation of urushiol polymers and thereafter urushiol-related toxicity could be reduced by making a lacquer harder and more stable. Moreover, heating a lacquer over 200℃ could cause thermo-degradation of urushiol polymers, and vaporized thermally degraded urushiol monomers and their by-products, which were determined using pyrolysis/GC-MS. Conclusions : These results support that heating process being performed over 200 ℃, such as stir-frying (炒) or calcination (煅), reduces the urushiol content in Geon-chil and hence, its medicinal use can be more stable without urushiol-related allergic reactions.

• Journal of Electrochemical Science and Technology
• /
• 제13권1호
• /
• pp.112-119
• /
• 2022

Molten carbonate fuel cells (MCFCs) are environmentally friendly, large-capacity power generation devices operated at approximately 650℃. If MCFCs are to be commercialized by improving their competitiveness, their cell life should be increased by operating them at lower temperatures. However, a decrease in the operating temperature causes a reduction in the cell performance because of the reduction in the electrochemical reaction rate. The cell performance can be improved by introducing a coating on the cathode of the cell. A coating with a high surface area expands the triple phase boundaries (TPBs) where the gas and electrolyte meet on the electrode surface. And the expansion of TPBs enhances the oxygen reduction reaction of the cathode. Therefore, the cell performance can be improved by increasing the reaction area, which can be achieved by coating nanosized LiCoO₂ particles on the cathode. However, although a coating improves the cell performance, a thick coating makes gas difficult to diffuse into the pore of the coating and thus reduces the cell performance. In addition, LiCoO₂-coated cathode cell exhibits stable cell performance because the coating layer maintains a uniform thickness under MCFC operating conditions. Therefore, the performance and stability of MCFCs can be improved by applying a LiCoO₂ coating with an appropriate thickness on the cathode.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1120-1123
• /
• 1996

DMC(Dynamic Matrix Control) algorithm has been successfully used in industries for more than a decade. It can handle constraints and easily extended to MIMO case. The application of DMC, however, is limited to the open loop stable process because it uses the FIR(Finite Impulse Response) or FSR(Finite Step Response) model. Integrating process widely used in chemical process industry, is the representative open loop unstable process. The disturbance rejection of DMC is relatively poor due to the assumption that the current disturbance is equivalent to the future disturbance. We propose the IDMC(Improved Dynamic Matrix Control) for the integrating process, as well as non-integrating process. IDMC has shown better disturbance rejection using multi-step ahead predictor for the disturbance.

• Journal of Welding and Joining
• /
• 제17권6호
• /
• pp.46-52
• /
• 1999

The auxiliary gas-shielded MAG (AMAG) process, which was devised to provide an argon-rich shielding environment using small amount of argon gas, was investigated experimentally to figure out its effects on metal transfer and weld quality. Proper conditions for the AMAG process including the argon gas ratio, position and direction of the auxiliary nozzle were determined experimentally. Performance of the AMAG process was compared with that of the double gas-shielded MAG(DMAG) and MAG processes by monitoring the bead profile, current and voltage waveforms. The AMAG process was found to provide better bead profile, more stable arc and wider operating range of spray transfer mode compared with the DMAG process. In general, performance of the AMAG process using the argon ratio of 30% was comparable to that of the MAG process using 80% argon and 20% CO₂ gas.

• 산업공학
• /
• 제12권1호
• /
• pp.150-157
• /
• 1999

Mini-Mill process has been recently in operation at Pohang steel company, which enables more flexible steel coil production on customer demands. The effects of process parameters in Mini-Mill process need to be analyzed not only to make the process stable but also to improve product quality. This work aims to develop a regression model of Mini-Mill process using accumulated product data such that the process parameter effects on product tensile strength may be analyzed. The analysis shows that tensile strength is influenced mainly by the amount of components such as carbon, manganese, silicon, and sulfur. The effect of temperature is shown to be small. It is concluded that control of the components is much more responsible for both meeting the target and reducing the variation of the product tensile strength. Heat treatment is more useful in compensating tensile strength variations due to thickness differences and improving workability and other quality characteristics. More work is necessary for establishing regression expressions of the process that is reliable and accurate enough to dispense with the off-line inspection of the product tensile strength.

• 한국전자파학회논문지
• /
• 제17권10호
• /
• pp.929-934
• /
• 2006

본 논문에서는 조건 안정 증폭기 설계를 위한 안정도 여유 분석 과정을 소개하고, 분포형 DC 차단 회로와 임피던스 정합 회로의 기능을 동시에 갖는 용량성 결합 정합 회로(CCMC)에 대해 기존 연구 결과보다 간단화된 설계 방법을 제안하였다. 조건 안정 마이크로파 증폭기 설계에 있어, 안정도 여유 분석에 근거한 접근법은 정량적으로 분석된 안정도 여유도에 근거하여 최대 이득 정합 조건을 결정하는데 유용하게 사용된다. 이러한 설계 방법은 조건 안정 상태에서 정합점 결정 시 반복적인 시행 착오를 줄일 수 있는 장점이 있다. 또한, 논문에서 제안하는 CCMC 설계 기법은 정합 회로의 구조를 정형화시킴으로써 기존 방법에 비해 합성 변수가 적은 장점이 있다. 제안 방법의 검증을 위해 박막 공정으로 제작된 24 GHz조건 안정 증폭기는 대역 평탄도 1 dB, 소신호 이득 10 dB로 설계 값과 잘 부합하는 결과를 보였다.

• 대한수학회지
• /
• 제36권1호
• /
• pp.139-157
• /
• 1999

Consider a supercritical Bellman-Harris process evolving from one particle. We superimpose on this process the additional structure of movement. A particle whose parent was at x at its time of birth moves until it dies according to a given Markov process X starting at x. The motions of different particles are assumed independent. In this paper we show that when the movement process X is standard Brownian the proportion of particles with position $\leq${{{{ SQRT { t} }}}} b and age$\leq$a tends with probability 1 to A(a)$\Phi$(b) where A(.) and $\Phi$(.) are the stable age distribution and standard normal distribution, respectively. We also extend this result to the case when the movement process is a Levy process.