• The Journal of the Korea Contents Association
• /
• v.13 no.1
• /
• pp.175-185
• /
• 2013

The judgement which is subject of research has denied legal rescission of division of the inherited property by agreement based on (1) the fact that the division of inherited property terminated at the time of concluding mutual agreement in its nature while only the relationship of claim and obligation between the inheritor who has paid for such obligation and the inheritor who has acquired such obligation in the mutual agreement remains (2) and the fact that the legal stability is considerably hindered as the re-partition of inherited property having retroactive effect becomes unavoidable in case of approving the legal rescission of the division of the inherited property by agreement. But it is reasonable to also approve legal rescission on the division of the inherited property by agreement in case the division by agreement actually has the nature such as conditional donation between joint heirs (1) from the fact that the division of the inherited property by agreement gets the nature of disposal equivalent to exchange, transfer and abandonment of share between joint heirs in actuality, (2) and the fact that there are no other theories in approving the validity of mutually agreed rescission despite the fact that the re-partition of inherited property having retroactive effect is unavoidable even in case of the mutually agreed rescission of the division by agreement among all joint heirs. However, as the division of the inherited property by agreement is a contract that gets concluded only if all joint heirs participate, even the legal rescission for the reason of not fulfilling the obligations paid by one party of the heirs during the division by agreement must be considered as possible only by expression of intentions from all other joint heirs excluding this one party.

• Applied Chemistry for Engineering
• /
• v.8 no.2
• /
• pp.172-178
• /
• 1997

Polyaniline(PANI)-stearic acid(SA) composite monolayer was formed at the air-water interface. The stearic acid as a surfactant was used to promote PANI monolayer formation. Uniform PANI-SA monolayer assemblies with Y type and transfer ratio of ca. 1 were fabricated using the Langmuir-Blodgett(LB) technique. The PANI-SA composite LB films with high electrical conductivity of $10^{-1}{\sim}10^{-2}S/cm$ were obtained by doping of HCl or $I_2$, and their conductivity revealed essentially close value as that of conventional PAHI-HCl complex. Especially, iodine is found to be the most promising dopant, since it gives a remarkable stability for the application as a polymer electrode in the MIM molecular device consisted of acceptor, sensitizer, and donor. The structure and physical properties of PANI-SA LB films were investigated through the near-ir UV, FT-IR, and Cyclic voltammetry.

• Applied Chemistry for Engineering
• /
• v.17 no.1
• /
• pp.16-21
• /
• 2006

In this study, PEO blend fibers mixed with polyaniline (PANI)/10-camphor sulfonic acid (CSA) and PANI/dodecylbenzene sulfonic acid (DBSA) were electro spun to investigate the influence of PANI content. CSA and DBSA were used as a functionalized doping acid having a bulky volume. PANI/PEO blend solution was prepared by dissolving PEO and PANI doped with CSA or DBSA. The thermal properties were measured by thermogravimetric analyzer (TGA). As a result, with increasing of the PANI content in PANI/CSA and PANI/DBSA, although initial decomposition temperature (IDT) was decreased, thermal stability was increased due to the increase of $A^*{\cdot}K^*$ and integral procedural decomposition temperature (IPDT). The electrical conductivities measured by the 4-probe method. The electric conductivity was increased with increasing of PANI content in PANI/CSA and PANI/DBSA. However, electrical conductivity did not change significantly beyond 30% content of PANI. From CV results, PANI/CSA showed the better defined peak shpae and higher peak current density compared to PANI/DBSA. This was probably related to the slightly higher electrical conductivity or better morphology for easy charge transfer in the case of PANI/CSA.

• Applied Chemistry for Engineering
• /
• v.7 no.4
• /
• pp.743-749
• /
• 1996

A new static contractor using capillary phenomena induced by a highly packed fiber bundle was developed for the solvent extraction. When two immiscible phases being cocurrently and forcedly fed into the packed fiber bundle, the contactor brings about a very large liquid-liquid contact area for mass transfer within a small definite space without any turbulence and drop phenomena. In order to test the characteristics and stability of the static contractor system, continuous extraction experiments of TBP-uranyl ion-nitric acid system were done and compared with the batch extraction experiment of the same chemical system. The performance of the static contractor were the same as that of the ideal batch extractor with the same extraction condition. For the increase of the extraction yield by the contactor, the increase of organic flow rate was required at a fixed aqueous flow rate, and a certain residence time of the aqueous phase flow within the contactor system had to be maintained to meet the performance of the batch system of the same phase ratio. The residence time in the case of TBP-uranyl ion-nitric acid system was about 1.9 minutes. This system was confirmed to be effective and stable enough for purposes of the kinetic study of solvent extraction as well as the mutual separation and purification of ordinary materials because of good reproducibility and the stable and large static liquid-liquid contact area.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.1
• /
• pp.191-199
• /
• 2007

This study was conducted to examine the biomechanical characteristics of open spike in the volleyball to improve the technique of the volleyball spike. The subjects were six male college and high school athletes. The motions of volleyball spike were filmed by using two Sony VX 2000 Video Cameras. The mechanical factors were angle and angular velocity of body segments in the upper and the lower limbs. The conclusions were as follows; 1. The angle of the shoulder joint of the skilled showed larger than that of the unskilled in impacting of the volley ball spike. 2. The angle of the elbow joint of the skilled showed larger than that of the unskilled in impacting of the volley ball spike. 3. The angle of the wrist joint of the skilled showed smaller than that of the unskilled in impacting of the volley ball spike. 4. The angle of the hip joint of skilled showed larger than that of unskilled in impacting of the volley ball spike. 5. The angle of the knee joint of the skilled and the unskilled showed same in take off and impacting of the volley ball spike, and that of the skilled showed smaller than that of the unskilled in take-off touchdown and touchdown after impact of the volley ball spike. 6. The angle of the ankle joint of skilled showed larger than unskilled in take-off of the volley ball spike. 7. The angular velocity of the shoulder joint, elbow joint, wrist joint of the skilled showed faster than that of the unskilled in impacting of the volley ball spike. Taken together the result of them, I have come to conclusion that knee joint angle in touchdown of the take off should be decreased and knee joint angle in take off should be increased, and then stability of the take off should be made and, and that extension of the elbow joint should be made and wrist joint angle decreased and shoulder and hip joint angle increased, and then C.O.G of the arm and hand should be positioned ahead C.O.G of the body in impacting for effective impact of the spike, and that the transfer of the angular velocity of body segments for effective impact of the spike make from the proximal segment to the distal segment at spike in volleyball.

• Journal of the Korean earth science society
• /
• v.23 no.4
• /
• pp.380-392
• /
• 2002

The purpose of the present study is to evaluate the usage of microtremor in estimation of subsurface structure and ground response to strong ground motion. To accomplish the purpose, the current status of microtremor study are reviewed and microtremors recorded at several stations are analysed. First of all, the stability of microtremor is examined through the analysis of microtremors recorded for 80 seconds per hour during the time from 10 p.m. to 6 a.m. for eight hours at night time. It is found that the shape of microtremor spectra of low frequency below 10Hz is approximately invariable with time and the spectra contain informations about subsurface structure. The subsurface structures estimated from the predominant frequency determined from the recorded microtremors are compared with the known ones from geophysical surveys at several stations in Kyungju. The comparison of structures shows rough agreements at most stations. Horizontal to vertical spectral ratio(HVSR) technique for microtremor has been proposed as an indirect method to determine ground response to strong ground motion. The HVSR for microtremors recorded in Kyungju is calculated and compared with theoretical transfer function calculated from the known structures. The comparison shows rough coincidence of the peak frequency of spectra between them.

• Journal of The Korean Association For Science Education
• /
• v.18 no.4
• /
• pp.527-537
• /
• 1998

This article is a part of a research on the elementary science curriculum development to enhance creative problem-solving abilities. The components of the curriculum have been identified as 'scientific knowledge', 'process skills' & 'divergent/critical thinking'. Among these components, construction of the scientific knowledge that enables creative problem-solving abilities has been selected as an intensive research topic for the purpose of the present research. To avoid or to prevent the knowledge learned from separate facts and concepts, five themes have been selected so as to incorporate with all three areas of the elementary science curriculum, i.e., physical science, earth science and life science. The five themes are, 'structure', 'change', 'interaction', 'energy' and 'stability'. The contents of elementary science, which have been selected from the 3rd, 6th and 7th National Elementary Science curriculum, were reconstructed based on the five themes given above. The results of reconstruction are presented in the form of matrix, such that the vertical axis represents how the concepts are related within each domain of science, while the horizontal axis shows how the concepts are interconnected between domains of science. Therefore, based upon the five themes, individual or separate knowledge can be put into more unified knowledge so that contribution of knowledge transfer to new ones can be expected for leaners who will be creative in problem-solving. The process and products of the curriculum development as well as the background of the present research are described and discussed in detail.

• Korean Chemical Engineering Research
• /
• v.46 no.4
• /
• pp.727-731
• /
• 2008

Mesoporous Pt-Au alloy films were successfully fabricated on ITO-coated glass by electrodeposition method using tri-blockcopolymer (P123) as a templating agent. The electrolyte consisted of 10 mM hydrogen hexachloroplatinate ($H_2PtCl_6$), 10 mM hydrogen tetrachloroaurate ($HAuCl_4$), and proper amount of P123. For comparison, control samples were electrodeposited without $HAuCl_4$ and P123. Film composition was determined by EDS(Energy Dispersive X-ray Spectroscopy), and the mesoporous structure was confirmed by TEM(Transmission Electron Microscopy). SEM(Scanning Electron Microscopy) was utilized to examine surface morphology, and it was observed that the addition of P123 affected the particle growth, resulting in the significant change of surface morphology. Methanol oxidation and CO oxidation were carried out to investigate electrocatalytic activities of synthesized samples. It was observed that the catalytic activity was strongly dependent on the film compositions. Compared with nonporous electrode prepared without P123 templating, mesoporous films prepared with P123 templating showed much higher catalytic activities and stability for both methanol oxidation and CO oxidation. These enhanced electrocatalytic activities were due to the high surface area and facilitated charge transfer of mesoporous films.

• Journal of Digital Convergence
• /
• v.15 no.3
• /
• pp.9-16
• /
• 2017

Organizational culture provides organizational members with identity, homogeneity and behavioral guidance, and promotes organizational commitment and enhances the stability of social systems. What organizational culture positively influences organizational performance? In this study, we tried to categorize organizational culture as creativity, change, cooperation, trust and knowledge sharing for specific public institutions and to diagnose the organizational culture by examining the level of recognition of the organizational members. The purpose of this study is to investigate the effect of organizational culture on organizational culture. The result of this study shows that the degree of future - oriented and cooperative culture of the public institutions that are the subject of research is not so high. In order to improve the performance of the organization, it is necessary to create a futuristic and cooperative culture. In order to create such a culture, various efforts must be made to continuously communicate and build trust among the members of the organization. In particular, leadership efforts to distribute, transfer, and trust authority to subordinates are a priority. In other words, it is very difficult to build a future-oriented, collaborative culture successfully without the efforts of managers.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.3 s.47
• /
• pp.427-438
• /
• 2004

Cosmeceuticals products we not the products simply for moisturizing and protecting skin but the ones for encouraging to make improvements on wrinkles and helping to whiten, tan, and protect skin against ultraviolet light. In a broader sense, they refer to products with aiming to maintain healthy condition of skin such that skin troubles could be improved or aging of skin could be delayed. However, cosmeceuticals should not have any side effects because they are applied to the whole body for a long period of time differing from medical products which are used on specific areas for a short time. The number of such cosmeceuticals has increased from 500 in 2001 to 2300 in 2003. In order to develop and broaden the scope of cosmeceuticals, the concept of cosmetics needs to be changed from caring skin to delaying aging of the skin and reviving cells. For this purpose, high-valued materials should be developed through basic researches related to the biological function of skin, in vivo experiment and reaction of skin in response to various stimuli using biotechnologies and bioengineering methods. At the same time, it should be proceeded to develop new nano materials for overcoming skin barriers and transfer matericals for helping to absorb effective substances and maintaining stability.