• 대한기계학회논문집
• /
• 제18권6호
• /
• pp.1542-1550
• /
• 1994

For a class of singularly perturbed uncertain system, an output feedback control law is designed. The controller structure is designed based on the uncertain reduced-order system, and the controller parameters are determined by information on the reduced-order and full-order systems. It has been shown that the reduces-order system with the designed controller possesses a stability property(specifically, a global uniform attractivity). Furthermore, the stability property of this control scheme is robust with respect to singular perturbation ; i.e., the full-order system, subject to the same controller, possesses the global uniform attractivity, provided the singular perturbation parameter $\mu<\mu^{*}$, where a threshold value $\mu^{*}$ can be computed from the information available on the full-order system.

• 대한기계학회논문집
• /
• 제10권1호
• /
• pp.1-6
• /
• 1986

본 논문에서는 제트유동에 놓인 튜우브 집합체의 진동 발생구조를 깊이 파악하고 일반성 있게 사용할 수 있는 설계 지침을 마련하기 위하여 보다 광법위 하게 수행된 파라미터 연구 내용을 다루었다

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.287-288
• /
• 2005

In this study, we have investigated electro-optical characteristics of thermal and UV stressed TN cells on the rubbed polyimide surface. Mono-domain alignments of thermal stressed TN cells over temperature of liquid crystal isotropic phase were almost same that of no thermal stressed TN cells. Also, threshold voltage and response time of thermal stressed TN cells were same that of no thermal stressed TN cells. Finally, the residual DC voltage of the thermal stressed TN cell on the polyimide surface show decrease of characteristics as increasing thermal stress time. Therefore, thermal stability of TN cell was decreased by high thermal stress for the long times.

• 한국전기전자재료학회논문지
• /
• 제19권11호
• /
• pp.1033-1036
• /
• 2006

We have investigated electro-optical characteristics in three kinds of twisted nematic (TN) cells on the polyimide surface. The threshold voltage and the response time of thermal stressed TN cells were same that of no thermal stressed TN cells. There were little change of value in these TN cells. On the other hand, transmittance of no thermal stressed TN cells were better than that of thermal stressed TN cells. Transmittances of TN cells on the polyimide surface decreased by increasing thermal stress time. Moreover, the residual DC of the thermal stressed TN cells increased as increasing thermal stress temperature and time. Therefore, thermal stability of TN cells were decreased gradually by giving high thermal stress for a long time.

• 한국전기전자재료학회논문지
• /
• 제17권4호
• /
• pp.439-442
• /
• 2004

In this study, we investigated about electrooptics characteristic of three kinds of TN cell on the polyimide surface. Monodomain alignments of thermal stressed TN cell over temperature of liquid crystal isotropic phase were almost the same as that of no thermal stressed TN cells. However, the thermal stressed TN cells have many defects. Also, threshold voltage and response time of thermal stressed TN cells show the same performances as no thermal stressed TN cells. There were little changes of value in these TN cells. However, transmittances of TN cells on the polyimide surface decrease with increasing thermal stress time. Finally, the residual DC voltage of the thermal stressed TN cell on the polyimide surface shows decrease of characteristics as increasing thermal stress time. Therefore, the thermal stability of TN cell was decreased by high thermal stress for the long times.

• 대한기계학회논문집A
• /
• 제28권11호
• /
• pp.1685-1691
• /
• 2004

This paper describes the fault detection and failsafe logic to be used in an Electronic Stability Program(ESP). The aim of this paper is to prevent of erroneous controls in the ESP. Developed this paper introduces the fault detection logic and evaluation of residual signals. The failsafe logic consists of four redundant sub-models, which can be used for detecting the faults in various sensors (yaw rate, lateral acceleration, steering wheel angle). We present two mathematical residual generation methods : one is a method using the average value and the other is a method using the minimum value of the each residual. We verified a failsafe logic developed using vehicle test results also we compare vehicle model based simulation results with test vehicle results.

• 자동차안전학회지
• /
• 제5권1호
• /
• pp.50-55
• /
• 2013

When it comes to commercial vehicles, their unique characteristics - center of gravity, size, weight distribution - make them particularly vulnerable to rollover. On top of that, conventional heavy vehicle brake exhibits longer actuation delays caused in part by long air lines from brake pedal to tires. This paper describes rollover prevention algorithm that copes with the characteristics of commercial vehicles. In regard of compensating for high actuating delay, predicted rollover index with short preview time has been designed. Moreover, predicted rollover index with longer preview time has been calculated by using road curvature information based on environment information. When rollover index becomes larger than specific threshold value, desired braking force is calculated in order to decrease the index. At the same time, braking force is distributed to each tire to make yaw rate track desired value.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제30권2호
• /
• pp.203-220
• /
• 2023

A new modification of the SIS epidemic model incorporating the adaptive host behavior is proposed. Unlike the common situation in most epidemic models, this system has two disease-free equilibrium points, and we were able to prove that as the basic reproduction number approaches the threshold of 1, these two points merge and a Bogdanov-Takens bifurcation of codimension three occurs. The occurrence of this bifurcation is a sign of the complexity of the dynamics of the system near the value 1 of basic reproduction number. Both local and global stability of disease-free and endemic equilibrium point are studied.

• Nuclear Engineering and Technology
• /
• 제56권4호
• /
• pp.1454-1459
• /
• 2024

Researchers have applied theoretical and CFD models for years to analyze the fluidelastic instability (FEI) of tube arrays in steam generators and other heat exchangers. The accuracy of each approach has typically been evaluated using the discrepancy between the experimental critical flow velocity and the predicted value. In the best cases, the predicted critical flow velocity was within an order of magnitude comparable to the measured one. This paper revisits the quasi-steady approach for damping controlled FEI in a normal triangular array with a pitch ratio of P/d = 1.375. The method addresses the fluidelastic frequency at the stability threshold as an input parameter for the approach. The excellent agreement between the estimated stability thresholds and the equivalent experimental results suggests that the fluidelastic frequency must be included in the quasi-steady analysis, which requires minimal computing time and experimental data. In addition, the model allows a simple time delay analysis regarding flow convective and viscous effects.

• 한국지반공학회논문집
• /
• 제39권10호
• /
• pp.27-39
• /
• 2023

극한홍수에 대응하기 위한 홍수 위험도 관리의 필수 요소인 홍수 위험도 평가를 위해서는 댐 및 하천제방과 같은 홍수방어시설에 대하여 여러 파괴 메커니즘을 고려한 신뢰도 해석을 수행해야 한다. 본 연구에서는 수위급강하에 의한 제체 사면의 시간에 따른 확률론적 안정성 평가에 대하여 연구하였다. 유한요소 해석에 의한 침투해석 결과를 사면안정 해석에 연동하여 Monte Carlo Simulation을 수행함으로써 수위급강하에 따른 제체의 시간의존적 거동을 연구하고 파괴확률을 계산하여 제방의 취약도 곡선을 작성하였다. 수위급강하에 의한 사면의 파괴확률은 특정 수위까지는 매우 작은 값을 유지하지만, 그 이상에서는 수위가 증가함에 따라 급격하게 증가하는 현상을 보였다. 또한 취약도 곡선은 수위 하강 속도에 크게 영향을 받았다. 수위 저하 속도는 수문 시나리오에 의한 수위의 변동해석을 통하여 결정되므로 수위급강하에 따른 제방 제외지 사면의 안정성은 기후변화에 따라 크게 영향을 받을 것으로 판단된다.