• 자원환경지질
• /
• 제48권2호
• /
• pp.131-145
• /
• 2015

심부 처분장 주변 지하수에 의한 대수층 광물의 풍화 산물을 열역학적으로 예측하고자 하였다. 화강암질암 대수층의 지하수 화학조성을 이용하여 카올리나이트와 스멕타이트 간의 용해도 상수를 구한 결과, 심부에 위치하는 지하수에서 이들 간의 반응이 평형상태에 있음을 관찰하였으며 평형상태일 때의 용해도 상수의 대수값은 카올리나이트와 Ca-, Mg-, Na-스멕타이트의 반응에 대해 각각 약 -14.56, -15.73, -7.76을 나타내었다. 상안정도 상에서 대부분의 화강암질암 심부지하수는 카올리나이트-스멕타이트 평형 경계에 위치하거나 스멕타이트와 일라이트에 대하여 안정한 것으로 나타났다. 염기성암 대수층의 천부지하수를 분석한 결과, 화강암질암 대수층의 심부지하수와 유사한 안정 영역 상에 도시되어 스멕타이트와 일라이트를 형성하는 것으로 나타났으며, 이는 대수층을 구성하는 일차광물의 광물학적 조성이 풍화산물 형성에 큰 영향을 미칠 수 있음을 나타낸다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.580-585
• /
• 2004

The purpose of this study is the stability evaluation of soil slope according to inclination of upper natural slope. Upper natural slope breeds loss of slope by inflow in slope of surface water by rainfal1 and f1uctuation of amount of materials in slope through method of cutting slope according to degree of inclination. Basis of standard inclination does not consider of inclination of upper natural slope and is presented uniformly. Therefore, in this study, analyzed stability of inclination of upper natural slope through limit equilibrium analysis. Result is same as following. First, safety factor through limit equilibrium analysis is almost direct decrease when gradient of soil slope is 1:1.2, 1:1.5. However, when gradient of soil slope is 1:1.0, 1:0.7, if sinclination of upper natural slope are $20^{\circ}$, it shows tendency that decrease of safety factor becomes low rapidly. Second, when when gradient of soil slope is fixed, inclination of upper natural slope increase tendency(maximum 3.0 times) that decrease of safety factor.

• 한국지반신소재학회논문집
• /
• 제8권3호
• /
• pp.17-23
• /
• 2009

보강사면안정 문제에 널리 이용되는 절편법은 사용이 간편하고 계산시간이 짧다는 장점이 있으나, 각 절편들 사이에 작용하는 힘에 대한 가정에 따라 여러 가지 방법으로 분류되며, 그 결과 또한 다르게 나오는 단점이 있다. 본 논문에서는 이러한 문제에 대한 해결방안의 하나로 제시된 수치해석을 이용한 사면의 안정해석기법인 강도감소법과 응력장을 이용한 안정해석법을 원리 및 적용성을 살펴보고 간단한 사례를 통한 특징을 고찰하였다.

• 한국지반공학회논문집
• /
• 제15권5호
• /
• pp.19-28
• /
• 1999

본 논문에서는 사면붕괴해석에 대한 유한요소법의 적용에 대하여 검토하였다. 사면안정문제에 대해 가장 일반적으로 사용되는 방법은 한계평형이론에 의한 절편법이다. 또한 유한요소법은 지반의 응력, 변형률을 분석하는 방법으로 널리 인식되어 있다. 본 논문에서는 유한요소법으로 사면안정해석시, 요구되는 최소안전율 계산방법을 효율적으로 고려하는 방법에 대하여 검토하였다. 그리고 유한요소법으로 사면의 붕괴해석을 하는 경우에, 적용되는 해석방법 및 그 결과에 미치는 요인에 대하여 검토하였다. 또한, 여러 사면의 경우에 대하여 기존의 한계평형법에 의한 절편법과 유한요소 해석결과를 비교, 검토하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.199-206
• /
• 2005

Engineers have performed slope stability analyses, including Limit Equilibrium Analysis, Finite Difference Analysis and Finite Element Analysis. Each analysis results in different Factor of Safety(FS) for slopes. The comparison of FS results from these stability analyses has been carried out for various conditions, such as geometry of slopes, dry and fully saturated soils, nail and anchor reinforcements. Standard deviations of FS calculated from various slope analyses are 0.03 to 0.04 and 0.22 to 0.48 for the slopes without and with nail or anchor reinforcement, respectively. Construction of tiered concrete retaining wall in addition to nail or anchor reinforcement increases FS of 12% to 29% for fully saturated soils.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 봄 학술발표회 논문집
• /
• pp.457-464
• /
• 1998

The equilibrium path of shallow sinusoidal arches supported by hinges at both ends is investigated. The displacement increment method is used to get the solution of the nonlinear differential equations for these structures and to plot the equilibrium paths by the results. Using the equilibrium paths, the relations between the position of buckling point and buckling type for the case of sinusoidal distributed loads are inferred. From the result that the buckling type changes according to the normalized rise of arch, it is also shown that the arch rise is the governing factor to stability regions

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.179-184
• /
• 2005

Shear strength parameters obtained from filed survey are important factors in the analysis of slope stability. In this study, sensitivity analysis was performed to evaluate the effect of input parameters on the analysis of slope stability. The input parameters selected for sensitivity analysis were slope angle, cohesion, and friction angle. Monte-Carlo Simulation method was used for calculating input parameters and the factor of safety was computed by means of limit equilibrium method. A rock slope, which has failed in the field, was used for the sensitivity analysis in the analysis of slope stability. The result of analysis shows that the factor of safety of the rock slope was a little low. From partial correlation coefficient(PPC) of input parameters determined from the sensitivity analysis, slope stability was dependant on cohesion and slope angle. The effect of friction angle was lower than that of cohesion and slope angle on slope stability.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1999년도 춘계 학술대회논문집
• /
• pp.23-28
• /
• 1999

A mutigrid convergence acceleration technique is presented for computing hypersonic inviscid and viscous flows in equilibrium state. The governing equations are solved using an explicit Runge-Kutta method. Curve fitting data in NASA Reference Publication 1181, 1260 are used to calculate equilibrium properties. In order to ensure stability, damped prolongation and modified implicit residual smoothing are proposed. Blunt body test cases are presented to demonstrate the robustness and the efficiency in performance of the proposed methods

• 한국항해항만학회지
• /
• 제43권5호
• /
• pp.328-334
• /
• 2019

Underwater architecture in providing a comfortable living space underwater is mandated to survive prevailing environmental loads, especially hydrostatic ambient water pressure exerted on the structure of individual habitat hulls at depth and hydrodynamic fluctuation of external forces that perturb the postural equilibrium and mooring stability of the underwater housing system, for which the design including the hull shape and mooring system constraint the responses. In this study, the postural stability of a proposed underwater floating housing system with three vertically connected ellipsoidal-shape habitat hulls of different sizes are theorized and calculated for hydrostatic stability, using MATLAB in the volumetric integration of a hull and the weight of operational loads under assumed scenarios. The assumptions made in the numerical method to estimate the stability of the habitat system include the fixed weight of the hulls, and their adjustable loads within operational limits for the set meteorological oceanic conditions. The purpose of this study was to numerically manipulate a) The buoyancy and b) The adjusted center of mass of the system within the range of designed external and internal load changes, by which the effective mooring system capability and postural equilibrium requirements were argued with the quantitative analysis.

• 대한기계학회논문집A
• /
• 제26권4호
• /
• pp.764-774
• /
• 2002

Dynamic behaviors are analyzed for an automatic ball balancer (ABB) with triple races, which is a device to reduce the unbalanced mass of optical disk drives (ODD) such as CD-ROM or DVD drives. The nonlinear equations of motion are derived by using Lagrange's equations with the polar coordinate system. It is shown that the polar coordinate system provides the complete stability analysis while the rectangular coordinate system used in other previous studies has limitations on the stability analysis. For the stability analysis, the equilibrium positions and the linearized perturbation equations are obtained by the perturbation method. Based on the linearized equations, the stability of the system is analyzed around the equilibrium positions; furthermore, to confirm the stability, the time responses for the nonlinear equations of motion are computed by using a time integration method and experimental analyses are performed. Theoretical and experimental results show a superiority of the ABB with triple races.